Generalized disjunction decomposition for the evolution of programmable logic array structures

Evolvable hardware refers to a self reconfigurable electronic circuit, where the circuit configuration is under the control of an evolutionary algorithm. Evolvable hardware has shown one of its main deficiencies, when applied to solving real world applications, to be scalability. In the past few years several techniques have been proposed to avoid and/or solve this problem. Generalized disjunction decomposition (GDD) is one of these proposed methods. GDD was successful for the evolution of large combinational logic circuits based on a FPGA structure when used together with bi-directional incremental evolution and with (1+ë) evolution strategy. In this paper a modified generalized disjunction decomposition, together with a recently introduced multi-population genetic algorithm, are implemented and tested for its scalability for solving large combinational logic circuits based on Programmable Logic Array (PLA) structures

Evolutionary Synthesis of Analog Electronic Circuits Using EDA Algorithms

Disertační práce je zaměřena na návrh analogových elektronických obvodů pomocí algoritmů s pravěpodobnostními modely (algoritmy EDA). Prezentované metody jsou na základě požadovaných charakteristik cílových obvodů schopny navrhnout jak parametry použitých komponent tak také jejich topologii zapojení. Tři různé metody využití EDA algoritmů jsou navrženy a otestovány na příkladech skutečných problémů z oblasti analogových elektronických obvodů. První metoda je určena pro návrh pasivních analogových obvodů a využívá algoritmus UMDA pro návrh jak topologie zapojení tak také hodnot parametrů použitých komponent. Metoda je použita pro návrh admitanční sítě s požadovanou vstupní impedancí pro účely chaotického oscilátoru. Druhá metoda je také určena pro návrh pasivních analogových obvodů a využívá hybridní přístup - UMDA pro návrh topologie a metodu lokální optimalizace pro návrh parametrů komponent. Třetí metoda umožňuje návrh analogových obvodů obsahujících také tranzistory. Metoda využívá hybridní přístup - EDA algoritmus pro syntézu topologie a metoda lokální optimalizace pro určení parametrů použitých komponent. Informace o topologii je v jednotlivých jedincích populace vyjádřena pomocí grafů a hypergrafů.Dissertation thesis is focused on design of analog electronic circuits using Estimation of Distribution Algorithms (EDA). Based on the desired characteristics of the target circuits the proposed methods are able to design the parameters of the used components and theirs topology of connection as well. Three different methods employing EDA algorithms are proposed and verified on examples of real problems from the area of analog circuits design. The first method is capable to design passive analog circuits. The method employs UMDA algorithm which is used for determination of the parameters of the used components and synthesis of the topology of their connection as well. The method is verified on the problem of design of admittance network with desired input impedance function which is used as a part of chaotic oscillator circuit. The second method is also capable to design passive analog circuits. The method employs hybrid approach - UMDA for synthesis of the topology and local optimization method for determination of the parameters of the components. The third method is capable to design analog circuits which include also ac- tive components such as transistors. Hybrid approach is used. The topology is synthesized using EDA algorithm and the parameters are determined using a local optimization method. In the individuals of the population information about the topology is represented using graphs and hypergraphs.

Open-ended evolution to discover analogue circuits for beyond conventional applications

This is the author's accepted manuscript. The final publication is available at Springer via http://dx.doi.org/10.1007/s10710-012-9163-8. Copyright @ Springer 2012.Analogue circuits synthesised by means of open-ended evolutionary algorithms often have unconventional designs. However, these circuits are typically highly compact, and the general nature of the evolutionary search methodology allows such designs to be used in many applications. Previous work on the evolutionary design of analogue circuits has focused on circuits that lie well within analogue application domain. In contrast, our paper considers the evolution of analogue circuits that are usually synthesised in digital logic. We have developed four computational circuits, two voltage distributor circuits and a time interval metre circuit. The approach, despite its simplicity, succeeds over the design tasks owing to the employment of substructure reuse and incremental evolution. Our findings expand the range of applications that are considered suitable for evolutionary electronics

Absolutely free extrinsic evolution of passive low-pass filter

Evolutionary electronics is a brunch of evolvable hardware, where the evolutionary algorithm is applied towards electronic circuits. The success of evolutionary search most of all depends on variable length representation methodology. The low-pass filter is a standard task in evolutionary electronics to start with. The results of evolution enable one to qualify whether the methodology is good for further experiments. In this paper the maximum freedom for evolutionary search has been proclaimed as a main target during development of new VLR methodology. The introduction of R-support elements enables to perform an unconstrained evolution of analogue circuits for the first time. The proposed algorithm has been tested on the example of analogue low-pass filter. The experimental results demonstrate that the evolved filter is comparable with filters evolved previously using genetic programming and genetic algorithms techniques. The obtained results are compared in details with low-pass filters previously designed

Evolutionary Synthesis of Fractional Capacitor Using Simulated Annealing Method

Synthesis of fractional capacitor using classical analog circuit synthesis method was described in [6]. The work presented in this paper is focused on synthesis of the same problem by means of evolutionary method simulated annealing. Based on given desired characteristic function as input impedance or transfer function, the proposed method is able to synthesize topology and values of the components of the desired analog circuit. Comparison of the results given in [6] and results obtained by the proposed method will be given and discussed

Design of Passive Analog Electronic Circuits Using Hybrid Modified UMDA algorithm

Hybrid evolutionary passive analog circuits synthesis method based on modified Univariate Marginal Distribution Algorithm (UMDA) and a local search algorithm is proposed in the paper. The modification of the UMDA algorithm which allows to specify the maximum number of the nodes and the maximum number of the components of the synthesized circuit is proposed. The proposed hybrid approach efficiently reduces the number of the objective function evaluations. The modified UMDA algorithm is used for synthesis of the topology and the local search algorithm is used for determination of the parameters of the components of the designed circuit. As an example the proposed method is applied to a problem of synthesis of the fractional capacitor circuit

Generalized disjunction decomposition for evolvable hardware

Evolvable hardware (EHW) refers to self-reconfiguration hardware design, where the configuration is under the control of an evolutionary algorithm (EA). One of the main difficulties in using EHW to solve real-world problems is scalability, which limits the size of the circuit that may be evolved. This paper outlines a new type of decomposition strategy for EHW, the “generalized disjunction decomposition” (GDD), which allows the evolution of large circuits. The proposed method has been extensively tested, not only with multipliers and parity bit problems traditionally used in the EHW community, but also with logic circuits taken from the Microelectronics Center of North Carolina (MCNC) benchmark library and randomly generated circuits. In order to achieve statistically relevant results, each analyzed logic circuit has been evolved 100 times, and the average of these results is presented and compared with other EHW techniques. This approach is necessary because of the probabilistic nature of EA; the same logic circuit may not be solved in the same way if tested several times. The proposed method has been examined in an extrinsic EHW system using the$(1 + lambda)$evolution strategy. The results obtained demonstrate that GDD significantly improves the evolution of logic circuits in terms of the number of generations, reduces computational time as it is able to reduce the required time for a single iteration of the EA, and enables the evolution of larger circuits never before evolved. In addition to the proposed method, a short overview of EHW systems together with the most recent applications in electrical circuit design is provided