18,184 research outputs found
Deep Space Network information system architecture study
The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
Description and Experience of the Clinical Testbeds
This deliverable describes the up-to-date technical environment at three clinical testbed demonstrator sites of
the 6WINIT Project, including the adapted clinical applications, project components and network transition technologies
in use at these sites after 18 months of the Project. It also provides an interim description of early experiences with
deployment and usage of these applications, components and technologies, and their clinical service impact
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Telemetry downlink interfaces and level-zero processing
The technical areas being investigated are as follows: (1) processing of space to ground data frames; (2) parallel architecture performance studies; and (3) parallel programming techniques. Additionally, the University administrative details and the technical liaison between New Mexico State University and Goddard Space Flight Center are addressed
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
Spacelab system analysis: A study of the Marshall Avionics System Testbed (MAST)
An analysis of the Marshall Avionics Systems Testbed (MAST) communications requirements is presented. The average offered load for typical nodes is estimated. Suitable local area networks are determined
- …