HoPP: Robust and Resilient Publish-Subscribe for an Information-Centric Internet of Things

This paper revisits NDN deployment in the IoT with a special focus on the interaction of sensors and actuators. Such scenarios require high responsiveness and limited control state at the constrained nodes. We argue that the NDN request-response pattern which prevents data push is vital for IoT networks. We contribute HoP-and-Pull (HoPP), a robust publish-subscribe scheme for typical IoT scenarios that targets IoT networks consisting of hundreds of resource constrained devices at intermittent connectivity. Our approach limits the FIB tables to a minimum and naturally supports mobility, temporary network partitioning, data aggregation and near real-time reactivity. We experimentally evaluate the protocol in a real-world deployment using the IoT-Lab testbed with varying numbers of constrained devices, each wirelessly interconnected via IEEE 802.15.4 LowPANs. Implementations are built on CCN-lite with RIOT and support experiments using various single- and multi-hop scenarios

Managing Mobility for Distributed Smart Cities Services

The IoT refers to the idea of internetworking physical devices, vehicles, buildings, and any other item embedded with the appropriate electronics, software, sensors, actuators, and network connectivity to allows them to interchange data and to provide highly effective new services. In this thesis we focus on the communications issues of the IoT in relation to mobility and we provide different solutions to alleviate the impact of these potential problems and to guarantee the information delivery in mobile scenarios. Our reference context is a Smart City where various mobile devices collaboratively participate, periodically sending information from their sensors. We assume that these services are located in platforms based in cloud infrastructures where the information is protected through the use of virtualisation ensuring their security and privacy. This thesis is structured into seven chapters. We first detail our objectives and identify the current problems we intend to address. Next, we provide a thorough review of the state of the art of all the areas involved in our work, highlighting how we improved the existing solutions with our research. The overall approach of the solutions we propose in this thesis use prototypes that encompasses and integrates different technologies and standards in a small infrastructure, using real devices in real scenarios with two of the most commonly used networks around the world: WiFi and 802.15.4 to efficiently solve the problems we originally identified. We focussed on protocols based on a producer/consumer paradigm, namely AMQP and particularly MQTT. We observed the behaviour of these protocols using in lab experiments and in external environments, using a mesh wireless network as the backbone network. Various issues raised by mobility were taken into consideration, and thus, we repeated the tests with different messages sizes and different inter-message periodicity, in order to model different possible applications. We also present a model for dimensioning the number of sources for mobile nodes and calculating the number of buffers required in the mobile node as a function of the number of sources and the size of the messages. We included a mechanism for avoiding data loss based on intermediate buffering adapted to the MQTT protocol that, in conjunction with the use of an alternative to the Network Manager in certain contexts, improves the connection establishment for wireless mobile clients. We also performed a detailed study of the jitter behaviour of a mobile node when transmitting messages with this proposal while moving through a real outdoor scenario. To emulate simple IoT networks we used the Cooja simulator to study and determine the effects on the probability of delivering messages when both publishers and subscribers were added to different scenarios. Finally we present an approach that combines the MQTT protocol with DTN which we specifically designed for constrained environments and guarantees that important information will never be lost. The advantage of our proposed solutions is that they make an IoT system more resilient to changes in the point of attachment of the mobile devices in an IoT network without requiring IoT application & service developers to explicitly consider this issue. Moreover, our solutions do not require additional support from the network through protocols such as MobileIP or LISP. We close the thesis by providing some conclusions, and identifying future lines of work which we unable to address here.Internet de las cosas (IoT) se refiere a la idea de interconectar sensores, actuadores, dispositivos físicos, vehículos, edificios y cualquier elemento dotado de la electrónica, así como del software y de la conectividad de red que los hace capaces de intercambiar datos para proporcionar servicios altamente efectivos. En esta tesis nos centramos en temas relacionados con la comunicación de sistemas IoT, específicamente en situaciones de movilidad y en los problemas que esto conlleva. Con este fin ofrecemos diferentes soluciones que alivian su impacto y garantizan la entrega de información en estas situaciones. El contexto de referencia es una ciudad inteligente donde varios dispositivos móviles participan de forma colaborativa enviando periódicamente información desde sus sensores hacia servicios ubicados en plataformas en la nube (cloud computing) donde mediante el uso de virtualización, la información está protegida garantizando su seguridad y privacidad. Las soluciones propuestas en esta tesis se enfocan en probar sobre una pequeña infraestructura un prototipo que abarca e integra diferentes tecnologías y estándares para resolver eficientemente los problemas previamente identificados. Hemos enfocado nuestro esfuerzo en el uso de dispositivos sobre escenarios reales con dos de las redes más extendidas en todo el mundo: WiFi y enlaces 802.15.4. Nos enfocamos en protocolos que ofrecen el paradigma productor/consumidor como el protocolo avanzado de colas de mensajes (AMQP) y particularmente el protocolo de transporte de mensajes telemétricos (MQTT), observamos su comportamiento a través de experimentos en laboratorio y en pruebas al aire libre, repitiendo las pruebas con diferentes tamaños de mensajes y diferente periodicidad entre mensajes. Para modelar las diferentes posibles aplicaciones de la propuesta, se tomaron en consideración varias cuestiones planteadas por la movilidad, resultando en un modelo para dimensionar eficientemente el número de fuentes para un nodo móvil y para calcular el tamaño requerido del buffer, en función del número de fuentes y del tamaño de los mensajes. Proponemos un mecanismo adaptado al protocolo MQTT que evita la pérdida de datos en clientes móviles, basado en un buffer intermedio entre la producción y publicación de mensajes que, en conjunto con el uso de una alternativa al gestor de conexiones inalámbricas "Network Manager", en ciertos contextos mejora el establecimiento de las conexiones. Para la evaluación de esta propuesta se presenta un estudio detallado de un nodo móvil que se mueve en un escenario real al aire libre, donde estudiamos el comportamiento del jitter y la transmisión de mensajes. Además, hemos utilizado emuladores de redes IoT para estudiar y determinar los efectos sobre la probabilidad de entrega de mensajes, cuando se agregan tanto publicadores como suscriptores a diferentes escenarios. Finalmente, se presenta una solución totalmente orientada a entornos con dispositivos de recursos limitados que combina los protocolos MQTT con redes tolerantes a retardos (DTN) para garantizar la entrega de información. La ventaja de las soluciones que proponemos reside en el hecho de que los sistemas IoT se vuelven resilientes a la movilidad y a los cambios de punto de acceso, permitiendo así que los desarrolladores creen fácilmente aplicaciones y servicios IoT evitando considerar estos problema. Otra ventaja de nuestras soluciones es que no necesitan soporte adicional de la red como sucede con protocolos como MobileIP o el protocolo que separa el identificador del localizador (LISP). Se destaca cómo hemos mejorado las soluciones existentes hasta el momento de la escritura de esta disertación, y se identifican futuras líneas de actuación que no han sido contempladas.Internet de les coses (IoT) es refereix a la idea d'interconnectar sensors, actuadors, dispositius físics, vehicles, edificis i qualsevol element dotat de l'electrònica, així com del programari i de la connectivitat de xarxa que els fa capaces d'intercanviar dades per proporcionar serveis altament efectius. En aquesta tesi ens centrem en temes relacionats amb la comunicació de sistemes IoT, específicament en situacions de mobilitat i en els problemes que això comporta. A aquest efecte oferim diferents solucions que alleugeren el seu impacte i garanteixen el lliurament d'informació en aquestes situacions. El context de referència és una ciutat intel·ligent on diversos dispositius mòbils participen de forma col·laborativa enviant periòdicament informació des dels seus sensors cap a serveis situats en plataformes en el núvol (cloud computing) on mitjançant l'ús de virtualització, la informació està protegida garantint la seva seguretat i privadesa. Les solucions proposades en aquesta tesi s'enfoquen a provar sobre una xicoteta infraestructura un prototip que abasta i integra diferents tecnologies i estàndards per a resoldre eficientment els problemes prèviament identificats. Hem enfocat el nostre esforç en l'ús de dispositius sobre escenaris reals amb dos de les xarxes més esteses a tot el món: WiFi i enllaços 802.15.4. Ens enfoquem en protocols que ofereixen el paradigma productor/consumidor com el protocol avançat de cues de missatges (AMQP) i particularment el protocol de transport de missatges telemètrics (MQTT), observem el seu comportament a través d'experiments en laboratori i en proves a l'aire lliure, repetint les proves amb diferents grandàries de missatges i diferent periodicitat entre missatges. Per a modelar les diferents possibles aplicacions de la proposta, es van prendre en consideració diverses qüestions plantejades per la mobilitat, resultant en un model per a dimensionar eficientment el nombre de fonts per a un node mòbil i per a calcular la grandària requerida del buffer, en funció del nombre de fonts i de la grandària dels missatges. Proposem un mecanisme adaptat al protocol MQTT que evita la pèrdua de dades per a clients mòbils, basat en un buffer intermedi entre la producció i publicació de missatges que en conjunt amb l'ús d'una alternativa al gestor de connexions sense fils "Network Manager'', en certs contextos millora l'establiment de les connexions. Per a l'avaluació d'aquesta proposta es presenta un estudi detallat d'un node mòbil que es mou en un escenari real a l'aire lliure, on estudiem el comportament del jitter i la transmissió de missatges. A més, hem utilitzat emuladors de xarxes IoT per a estudiar i determinar els efectes sobre la probabilitat de lliurament de missatges, quan s'agreguen tant publicadors com subscriptors a diferents escenaris. Finalment, es presenta una solució totalment orientada a entorns amb dispositius de recursos limitats que combina els protocols MQTT amb xarxes tolerants a retards (DTN) per a garantir el lliurament d'informació. L'avantatge de les solucions que proposem resideix en el fet que els sistemes IoT es tornen resilients a la mobilitat i als canvis de punt d'accés, permetent així que els desenvolupadors creuen fàcilment aplicacions i serveis IoT evitant considerar aquests problema. Un altre avantatge de les nostres solucions és que no necessiten suport addicional de la xarxa com succeeix amb protocols com MobileIP o el protocol que separa l'identificador del localitzador (LISP). Es destaca com hem millorat les solucions existents fins al moment de l'escriptura d'aquesta dissertació, i s'identifican futures línies d'actuació que no han sigut contemplades.Luzuriaga Quichimbo, JE. (2017). Managing Mobility for Distributed Smart Cities Services [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/84744TESI

Integration of heterogeneous devices and communication models via the cloud in the constrained internet of things

As the Internet of Things continues to expand in the coming years, the need for services that span multiple IoT application domains will continue to increase in order to realize the efficiency gains promised by the IoT. Today, however, service developers looking to add value on top of existing IoT systems are faced with very heterogeneous devices and systems. These systems implement a wide variety of network connectivity options, protocols (proprietary or standards-based), and communication methods all of which are unknown to a service developer that is new to the IoT. Even within one IoT standard, a device typically has multiple options for communicating with others. In order to alleviate service developers from these concerns, this paper presents a cloud-based platform for integrating heterogeneous constrained IoT devices and communication models into services. Our evaluation shows that the impact of our approach on the operation of constrained devices is minimal while providing a tangible benefit in service integration of low-resource IoT devices. A proof of concept demonstrates the latter by means of a control and management dashboard for constrained devices that was implemented on top of the presented platform. The results of our work enable service developers to more easily implement and deploy services that span a wide variety of IoT application domains

Unified Communications for Space Inventory Management

To help assure mission success for long-duration exploration activities, NASA is actively pursuing wireless technologies that promote situational awareness and autonomy. Wireless technologies are typically extensible, offer freedom from wire tethers, readily support redundancy, offer potential for decreased wire weight, and can represent dissimilar implementation for increased reliability. In addition, wireless technologies can enable additional situational awareness that otherwise would be infeasible. For example, addition of wired sensors, the need for which might not have been apparent at the outset of a program, night be extremely costly due in part to the necessary routing of cables through the vehicle. RFID, or radio frequency identification, is a wireless technology with the potential for significant savings and increased reliability and safety in space operations. Perhaps the most obvious savings relate to the application of inventory management. A fully automated inventory management system is highly desirable for long-term sustaining operations in space environments. This assertion is evidenced by inventory activities on the International Space Station, which represents the most extensive inventory tracking experience base in the history of space operations. In the short tern, handheld RFID readers offer substantial savings owing to reduced crew time for inventory audits. Over the long term, a combination of improved RFID technology and operational concepts modified to fully utilize the technology should result in space based inventory management that is highly reliable and requires very little crew time. In addition to inventory management, RFID is likely to find space applications in real-time location and tracking systems. These could vary from coarse-resolution RFID portals to the high resolution afforded by ultra-wideband (UWB) RFID. Longer range RFID technologies that leverage passive surface acoustic wave (SAW) devices are being investigated to track assets on a lunar or planetary surface

SAROS: A social-aware opportunistic forwarding simulator

Many applications are being developed to leverage the popularity of mobile opportunistic networks. However, building adaptive testbeds can be costly and challenging. This challenge motivates the need for effective opportunistic network simulators to provide a variety of opportunistic environment setups, and evaluate proposed applications and protocols with a comprehensive set of metrics. This paper presents SAROS, a simulator of opportunistic networking environments with a variety of interest distributions, power consumption distributions, imported real traces, and social network integration. The simulator provides a wide variety of evaluation metrics that are not offered by comparable simulators. Finally, SAROS also implements several opportunistic forwarding algorithms ranging from social-oblivious algorithms to interest and power-aware social-based algorithms

Event-Driven User-Centric Middleware for Energy Efficient Buildings and Public Spaces

In this work, the design of an event-driven user-centric middleware for monitoring and managing energy consumption in public buildings and spaces is presented. The main purpose is to increase the energy efficiency, reducing consumption, in buildings and public spaces. To achieve this, the proposed service-oriented middleware has been designed to be event based, also exploiting the user behaviours patterns of the people who live and work into the building. Furthermore, it allows an easy integration of heterogeneous technologies in order to enable a hardware independent interoperability between them. Moreover, a Heating Ventilation and Air Conditioning (HVAC) control strategy has been developed and the whole infrastructure has been deployed in a real-world case study consisting of a historical building. Finally the results will be presented and discusse