Opto-VLSI based WDM multifunction device

The tremendous expansion of telecommunication services in the past decade, in part due to the growth of the Internet, has made the development of high-bandwidth optical net-works a focus of research interest. The implementation of Dense-Wavelength Division Multiplexing (DWDM) optical fiber transmission systems has the potential to meet this demand. However, crucial components of DWDM networks – add/drop multiplexers, filters, gain equalizers as well as interconnects between optical channels – are currently not implemented as dynamically reconfigurable devices. Electronic cross-connects, the traditional solution to the reconfigurable optical networks, are increasingly not feasible due to the rapidly increasing bandwidth of the optical channels. Thus, optically transparent, dynamically reconfigurable DWDM components are important for alleviating the bottleneck in telecommunication systems of the future. In this study, we develop a promising class of Opto-VLSI based devices, including a dynamic multi-function WDM processor, combining the functions of optical filter, channel equalizer and add-drop multiplexer, as well as a reconfigurable optical power splitter. We review the technological options for all optical WDM components and compare their advantages and disadvantages. We develop a model for designing Opto-VLSI based WDM devices, and demonstrate experimentally the Opto-VLSI multi-function WDM device. Finally, we discuss the feasibility of Opto-VLSI WDM components in meeting the stringent requirements of the optical communications industry

Design and demonstration of integrated micro-electro-mechanical relay circuits for VLSI applications

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2013.Cataloged from PDF version of thesis.Includes bibliographical references (p. 115-121).Complementary-Metal-Oxide-Semiconductor (CMOS) feature size scaling has resulted in significant improvements in the performance and energy efficiency of integrated circuits in the past 4 decades. However, in the last decade and for technology nodes below 90 nm, the scaling of threshold and supply voltages has slowed, as a result of subthreshold leakage, and power density has increased with each new technology node. This has forced a move toward multi-core architectures, but the energy efficiency benefits of parallelism are limited by the sub-thresahold leakage and the minimum energy point for a given function. Avoiding this roadblock requires an alternative device with more ideal switching characteristics. One promising class of such devices is the electro-statically actuated micro-electro-mechanical (MEM) relay which offers zero leakage current and abrupt turn-on behavior. Although a MEM relay is inherently slower than a CMOS transistor due to the mechanical movement, we have developed circuit design methodologies to mitigate this problem at the system level. This thesis explores such design optimization techniques and investigates the viability of MEM relays as an alternative switching technology for very-large scale integration (VLSI) applications. In the first part of this thesis, the feasibility of MEM relays for power management applications is discussed. Due to their negligibly low leakage, in certain applications, chips utilizing power gates built with MEM relays can achieve lower total energy than those built with CMOS transistors. A simple comparative analysis is presented and provides design guidelines and energy savings estimates as a function of technology parameters, and quantifies the further benefits of scaled relay designs. We also demonstrate a relay chip successfully power-gating a CMOS chip, and show a relay-based pulse generator suitable for self-timed operation. Going beyond power-gating applications, this work also describes circuit techniques and trade-offs for logic design with MEM-relays, focusing on multipliers which are commonly known as the most complex arithmetic units in a digital system. These techniques leverage the large disparity between mechanical and electrical time-constants of a relay, partitioning the logic into large, complex gates to minimize the effect of mechanical delay and improve circuit performance. At the component design level, innovations in compressor unit design minimize the required number of relays for each block and facilitate component cascading with no delay penalty. We analyze the area/energy/delay trade-offs vs. CMOS designs, for typical bit-widths, and show that scaled relays offer 10-20x lower energy per operation for moderate throughputs (<10-100MOPS). In addition to this analysis, we demonstrate the functionality of some of the most complex MEM relay circuits reported to date. Finally, considering the importance of signal generation and transmission in VLSI systems, this thesis presents MEM relay-based I/O units, focusing on design and demonstration of digital to analog converters (DAC). It also explores the concept of faster-than-mechanical-delay signal transmission.by Hossein Fariborzi.Ph.D

Non-invasive power gating techniques for bursty computation workloads using micro-electro-mechanical relays

PhD ThesisElectrostatically-actuated Micro-Electro-Mechanical/Nano-Electro- Mechanical (MEM/NEM) relays are promising devices overcoming the energy-efficiency limitations of CMOS transistors. Many exploratory research projects are currently under way investigating the mechanical, electrical and logical characteristics of MEM/NEM relays. One particular issue that this work addresses is the need for a scalable and accurate physical model of the MEM/NEM switches that can be plugged into the standard EDA software. The existing models are accurate and detailed but they suffer from the convergence problem. This problem requires finding ad-hoc workarounds and significantly impacts the designer’s productivity. In this thesis we propose a new simplified Verilog-AMS model. To test scalability of the proposed model we cross-checked it against our analysis of a range of benchmark circuits. Results show that, compared to standard models, the proposed model is sufficiently accurate with an average of 6% error and can handle larger designs without divergence. This thesis also investigates the modelling, designing and optimization of various MEM/NEM switches using 3D Finite Element Analysis (FEA) performed by the COMSOL multiphysics simulation tool. An extensive parametric sweep simulation is performed to study the energy-latency trade-offs of MEM/NEM relays. To accurately simulate MEMS/NEMS-based digital circuits, a Verilog-AMS model is proposed based on the evaluated parameters obtained from the multiphysics simulation tool. This allows an accurate calibration of the MEM/NEM relays with a significant reduction in simulation speed compared to that of 3D FEA exercised on COMSOL tool. The effectiveness of two power gating approaches in asynchronous micropipelines is also investigated using MEM/NEM switches and sleep transistors in reducing idle power dissipation with a particular target throughput. Sleep transistors are traditionally used to power gate idle circuits, however, these transistors have fundamental limitations in their effectiveness. Alternatively, MEM/NEM relays with zero leakage current can achieve greater energy savings under a certain data rate and design architecture. An asynchronous FIR filter 4 phase bundled data handshake protocol is presented. Implementation is accomplished in 90nm technology node and simulation exercised at various data rates and design complexities. It was demonstrated that our proposed approach offers 69% energy improvements at a data rate 1KHz compared to 39% of the previous work. The current trends for greater heterogeneity in future Systems-on- Chip (SoC) do not only concern their functionality but also their timing and power aspects. The increasing diversity of timing and power supply conditions, and associated concurrently operating modes, within an SoC calls for more efficient power delivery networks (PDN) for battery operated devices. This is especially important for systems with mixed duty cycling, where some parts are required to work regularly with low-throughput while other parts are activated spontaneously, i.e. in bursts. To improve their reaction time vs energy efficiency, this work proposes to incorporate a power-switching network based on MEM relays to switch the SoC power-performance state (PPS) into an active mode while eliminating the leakage current when it is idle. Results show that even with today0s large and high pull-in voltages, a MEM-relay-based power switching network (PSN) can achieve a 1000x savings in energy compared to its CMOS counterpart for low duty cycle. A simple case of optimising an on-chip charge pump required to switch-on the relay has been investigated and its energy-latency overhead has been evaluated. Heterogeneous many-core systems are increasingly being employed in modern embedded platforms for high throughput at low energy cost considerations. These applications typically exhibit bursty workloads that provide opportunities to minimize system energy. CMOS-based power gating circuitry, typically consisting of sleep transistors, is used as an effective technique for idle energy reduction in such applications. However, these transistors contribute high leakage current when driving large capacitive loads, making effective energy minimization challenging. This thesis proposes a novel MEMS-based idle energy control approach. Core to this approach is an integrated sleep mode management based on the performance-energy states and bursty workloads indicated by the performance counters. A number of PARSEC benchmark applications are used as case studies of bursty workloads, including CPU- and memory- intensive ones. These applications are exercised on an Exynos 5422 heterogeneous many-core platform, engineered with a performance counter facilities, showing 55.5% energy savings compared with an on-demand governor. Furthermore, an extensive trade-off analysis demonstrates the comparative advantages of the MEMS-based controller, including zero-leakage current and non-invasive implementations suitable for commercial off-the-shelf systems.Higher committee of education development in Iraq (HCED

Doctor of Philosophy

dissertationThis dissertation describes the design, fabrication, testing, reliability, and harsh environment performance of single-device Micro-electro-mechanical-system (MEMS)- based digital logic gates, such as XOR and AND, for applications in ultra-low-power computation in unforgiving settings such as high ionizing radiation and high temperatures. Within the scope of this dissertation are several significant contributions. First, this work was the first ever to report the evolution in logic design architecture from a CMOS-paradigm to a MEMS architecture utilizing a single functional device per logic, as opposed to multiple relays per logic. This novel approach reduces the number of devices needed to implement a logic function by approximately 10X, leading to better reliability, yield, speed, and overall better characteristics (subthreshold characteristics, smaller turn-on/off voltage variations, etc.) and it simplifies implementation of MEMSbased circuits. The logic gates illustrate ~1.5V turn-on voltage at 5MHz with >109 cycles of reliable operations and low operational power consumption (leakage current and power <10-9A, <1^W). Second, this work is the first ever to report an intensive study on the cycle-bycycle evolution of contact resistance (Rc) up to 100,000 cycles, on materials such as, Ir, Pt, W, Ni, Cr, Ti, Cu, Al, and graphite, which are materials commonly used in MEMS switches. Adhesion forces between contacts were also studied using a contact-modeAFM, force vs. displacement, experiment. Results show that materials with high Young's modulus, high melting temperatures, and high density show low initial contact resistances and low adhesion forces (such as Ir, Pt, and W). Third, the devices were interrogated separately in harsh environments where they were exposed to high doses of ionizing radiation (90kW) in a nuclear reactor for a prolonged time (120 min) and, separately, at high temperatures (409K). Here, results show that solid-state devices begin to deteriorate almost immediately to a point where their gate can no longer control the drain-to-source current, whereas MEMS switches survive such ionizing radiation and temperatures portraying clear ON and OFF states for far longer. In terms of the applications empowered and the breadth of topics covered to accomplish these results, the work presented here demonstrates significant contributions to an important and developing branch of engineering

DEVELOPMENT OF NANO/MICROELECTROMECHANICAL SYSTEM (N/MEMS) SWITCHES

Ph.DDOCTOR OF PHILOSOPH

Study of optoelectronic switch for satellite-switched time-division multiple access

The use of optoelectronic switching for satellite switched time division multiple access will improve the isolation and reduce the crosstalk of an IF switch matrix. The results are presented of a study on optoelectronic switching. Tasks include literature search, system requirements study, candidate switching architecture analysis, and switch model optimization. The results show that the power divided and crossbar switching architectures are good candidates for an IF switch matrix

Continuation-Based Pull-In and Lift-Off Simulation Algorithms for Microelectromechanical Devices

The voltages at which microelectromechanical actuators and sensors become unstable, known as pull-in and lift-off voltages, are critical parameters in microelectromechanical systems (MEMS) design. The state-of-the-art MEMS simulators compute these parameters by simply sweeping the voltage, leading to either excessively large computational cost or to convergence failure near the pull-in or lift-off points. This paper proposes to simulate the behavior at pull-in and lift-off employing two continuation-based algorithms. The first algorithm appropriately adapts standard continuation methods, providing a complete set of static solutions. The second algorithm uses continuation to trace two kinds of curves and generates the sweep-up or sweep-down curves, which can provide more intuition for MEMS designers. The algorithms presented in this paper are robust and suitable for general-purpose industrial MEMS designs. Our algorithms have been implemented in a commercial MEMS/integrated circuits codesign tool, and their effectiveness is validated by comparisons against measurement data and the commercial finite-element/boundary-element (FEM/BEM) solver CoventorWare

NEMsCAM: A novel CAM cell based on nano-electro-mechanical switch and CMOS for energy efficient TLBs

In this paper we propose a novel Content Addressable Memory (CAM) cell, NEMsCAM, based on both Nano-electro-mechanical (NEM) switches and CMOS technologies. The memory component of the proposed CAM cell is designed with two complementary non-volatile NEM switches and located on top of the CMOS-based comparison component. As a use case for the NEMsCAM cell, we design first-level data and instruction Translation Lookaside Buffers (TLBs) with 16nm CMOS technology at 2GHz. The simulations show that the NEMsCAM TLB reduces the energy consumption per search operation (by 27%), write operation (by 41.9%) and standby mode (by 53.9%), and the area (by 40.5%) compared to a CMOS-only TLB with minimal performance overhead.We thank all anonymous reviewers for their insightful comments. This work is supported in part by the European Union (FEDER funds) under contract TIN2012-34557, and the European Union’s Seventh Framework Programme (FP7/2007-2013) under the ParaDIME project (GA no. 318693)Postprint (author's final draft