Channel Sounding for the Masses: Low Complexity GNU 802.11b Channel Impulse Response Estimation

New techniques in cross-layer wireless networks are building demand for ubiquitous channel sounding, that is, the capability to measure channel impulse response (CIR) with any standard wireless network and node. Towards that goal, we present a software-defined IEEE 802.11b receiver and CIR estimation system with little additional computational complexity compared to 802.11b reception alone. The system implementation, using the universal software radio peripheral (USRP) and GNU Radio, is described and compared to previous work. By overcoming computational limitations and performing direct-sequence spread-spectrum (DS-SS) matched filtering on the USRP, we enable high-quality yet inexpensive CIR estimation. We validate the channel sounder and present a drive test campaign which measures hundreds of channels between WiFi access points and an in-vehicle receiver in urban and suburban areas

A Communication Monitor for Wireless Sensor Networks Based on Software Defined Radio

Link quality estimation of reliability-crucial wireless sensor networks (WSNs) is often limited by the observability and testability of single-chip radio transceivers. The estimation is often based on collection of packer-level statistics, including packet reception rate, or vendor-specific registers, such as CC2420's Received Signal Strength Indicator (RSSI) and Link Quality Indicator (LQI). The speed or accuracy of such metrics limits the performance of reliability mechanisms built in wireless sensor networks. To improve link quality estimation in WSNs, we designed a powerful wireless communication monitor based on Software Defined Radio (SDR). We studied the relations between three implemented link quality metrics and packet reception rate under different channel conditions. Based on a comparison of the metrics' relative advantages, we proposed using a combination of them for fast and accurate estimation of a sensor network link

Protocols for dynamic spectrum access in cognitive radio networks

Spectrum access protocols permit secondary users to transmit on frequency bands that are not being utilized by the primary owners. A cognitive radio that wishes to transmit in a band must first decide if the band is available (i.e., not being used by the owner) and then it must periodically re-evaluate the band\u27s availability once it begins transmitting in the band to ensure that a signal from a primary owner has not emerged. To accomplish these tasks, spectrum access protocols employ periodic sensing of the channel. Frequent sensing intervals are required to ensure that cognitive radios wishing to access the band are not disrupting transmissions by the owners of the band. Because spectrum sensing requires that radios cease transmission to observe the channel, the potential for throughput by the secondary users is reduced. A proposed enhancement to standard spectrum access protocols is presented that permits secondary users to monitor the frequency bands while communicating. This capability increases the amount of time that radios can transmit on the band and it decreases the amount of time required to detect the emergence of transmissions by a primary owner. Both improvements are obtained via a protocol that observes statistics obtained in the receiver of the cognitive radio during packet reception. The statistics are obtained with little or no additional hardware and do not require complicated channel measurements or pilot symbols. The proposed protocol for spectrum access is applicable to both single-link networks and multi-link cooperative networks

PPR: Partial Packet Recovery for Wireless Networks

Bit errors occur over wireless channels when the signal isn't strongenough to overcome the effects of interference and noise. Currentwireless protocols may use forward error correction (FEC) to correct forsome (small) number of bit errors, but generally retransmit the wholepacket if the FEC is insufficient. We observe that current wirelessmesh network protocols retransmit a number of packets and that most ofthese retransmissions end up sending bits that have already beenreceived multiple times, wasting network capacity. To overcome thisinefficiency, we develop, implement, and evaluate a partial packetrecovery (PPR) system.PPR incorporates three new ideas: (1) SoftPHY, an expandedphysical layer (PHY) interface to provide hints to the higher layersabout how ``close'' the actual received symbol was to the one decoded,(2) a postamble scheme to recover data even when a packet'spreamble is corrupted and not decodable at the receiver, and (3) PP-ARQ, an asynchronous link-layer retransmission protocol that allowsa receiver to compactly encode and request for retransmission only thoseportions of a packet that are likely in error.Our experimental results from a 27-node 802.15.4 testbed that includesTelos motes with 2.4 GHz Chipcon radios and GNU Radio nodes implementingthe Zigbee standard (802.15.4) show that PPR increases the framedelivery rate by a factor of 2x under moderate load, and7x under heavy load when many links have marginal quality

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Novel multiuser detection and multi-rate schemes for multi-carrier CDMA

A large variety of services is [sic] expected for wireless systems, in particular, high data rate services, such as wireless Internet access. Users with different data rates and quality of service (QoS) requirements must be accommodated. A suitable multiple access scheme is key to enabling wireless systems to support both the high data rate and the integrated multiple data rate transmissions with satisfactory performance and flexibility. A multi-carrier code division multiple access (MC-CDMA) scheme is a promising candidate for emerging broadband wireless systems. MC-CDMA is a hybrid of orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA). The most salient feature of MC-CDMA is that the rate of transmission is not limited by the wireless channel\u27s frequency-selective fading effects caused by multipath propagation. In MC-CDMA, each chip of the desired user\u27s spreading code, multiplied by the current data bit, is modulated onto a separate subcarrier. Therefore, each subcarrier has a narrow bandwidth and undergoes frequency-flat fading. Two important issues for an MC-CDMA wireless system, multiuser detection and multi-rate access, are discussed in this dissertation. Several advanced receiver structures capable of suppressing multiuser interference in an uplink MC-CDMA system, operating in a frequency-selective fading channel, are studied in this dissertation. One receiver is based on a so-called multishot structure, in which the interference introduced by the asynchronous reception of different users is successfully suppressed by a receiver based on the minimum mean-square error (MMSE) criterion with a built-in de-biasing feature. Like many other multiuser schemes, this receiver is very sensitive to a delay estimation error. A blind adaptive two-stage decorrelating receiver based on the bootstrap algorithm is developed to combat severe performance degradation due to a delay estimation error. It is observed that in the presence of a delay estimation error the blind adaptive bootstrap receiver is more near-far resistant than the MMSE receiver. Furthermore, a differential bootstrap receiver is proposed to extend the limited operating range of the two-stage bootstrap receiver which suffers from a phase ambiguity problem. Another receiver is based on a partial sampling (PS) demodulation structure, which further reduces the sensitivity to unknown user delays in an uplink scenario. Using this partial sampling structure, it is no longer necessary to synchronize the receiver with the desired user. Following the partial sampling demodulator, a minimum mean-square error combining (MMSEC) detector is applied. The partial sampling MMSEC (PS-MMSEC) receiver is shown to have strong interference suppression and timing acquisition capabilities. The complexity of this receiver can be reduced significantly, with negligible performance loss, by choosing a suitable partial sampling rate and using a structure called reduced complexity PS-MMSEC (RPS-MMSEC). The adaptive implementation of these receivers yields a superior rate of convergence and symbol error rate performance in comparison to a conventional MMSEC receiver with known timing. All the above receiver structures are for a single-rate MC-CDMA. Three novel multi-rate access schemes for multi-rate MC-CDMA, fixed spreading length (FSL), coded FSL (CFSL) and variable spreading length (VSL), have been developed. These multi-rate access schemes enable users to transmit information at different data rates in one MC-CDMA system. Hence, voice, data, image and video can be transmitted seamlessly through a wireless infrastructure. The bit error rate performance of these schemes is investigated for both low-rate and high-rate users

Direct-sequence spread-spectrum modulation for utility packet transmission in underwater acoustic communication networks

This thesis investigates the feasibility and performance of using Direct-Sequence Spread-Spectrum (DSSS) modulation for utility-packet transmission in Seaweb underwater wireless acoustic communications networks. Seaweb networks require robust channel-tolerant utility packets having a low probability of detection (LPD) and allowing for multi-user access. MATLAB code simulated the DSSS transmitter and receiver structures and a modeled channel impulse response represented the underwater environment. The specific modulation scheme implemented is direct-sequence, differentially encoded binary phase-shift keying (DS-DBPSK) with quadrature spreading. Performance is examined using Monte Carlo simulation. Bit error rates and packet error rates for various signal-to-noise ratios and channel conditions are presented and the use of a RAKE receiver, forward error-correction coding and symbol interleaving are examined for improving system performance.Lieutenant Commanader, Canadian NavyApproved for public release; distribution is unlimited

Multi-carrier CDMA using convolutional coding and interference cancellation

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN016251 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Multicarrier Frequency Hopping Spread Spectrum Techniques With Quasi-Cyclic Low Density Parity Check Codes Channel Coding

This work presents a new proposed Multicarrier Frequency Hopping Spread Spectrum (MCFH-SS) system employing Quasi-Cyclic Low Density Parity Check (QC-LDPC) codes instead of the conventional LDPC codes. A new technique for constructing the QC-LDPC codes based on row division method is proposed. The new codes offer more flexibility in terms of high girth, multiple code rates and block length. Moreover, a new scheme for channel prediction in MCFH-SS system is proposed. The technique adaptively estimates the channel conditions and eliminates the need for the system to transmit a request message prior to transmitting the packet data. The ready-to-use channel will be occupied with a Pseudonoise (PN) code and use for transmission or else, it will be banned

Physical Layer Techniques to improve the performances of the LoRaWAN networks

The central topic of the thesis is LoRa, one of the most prominent Low Power Wide Area Network (LPWAN) technologies. At first it is described the LoRa modulation and the LoRaWAN networks. The orthogonality between the different LoRa signals is investigated; the results of the investigation are then exploited to introduce two new innovative modulation techniques, i.e., DOLoRa (Dual Orthogonal LoRa) and DLoRa (Decreasing LoRa), with the aim to improve the performances of the LoRaWAN networks