3,964 research outputs found
Application of advanced on-board processing concepts to future satellite communications systems: Bibliography
Abstracts are presented of a literature survey of reports concerning the application of signal processing concepts. Approximately 300 references are included
A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System
Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem.
As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres.
Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and
integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ).
PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases.
Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model
Self-Stabilizing TDMA Algorithms for Dynamic Wireless Ad-hoc Networks
In dynamic wireless ad-hoc networks (DynWANs), autonomous computing devices
set up a network for the communication needs of the moment. These networks
require the implementation of a medium access control (MAC) layer. We consider
MAC protocols for DynWANs that need to be autonomous and robust as well as have
high bandwidth utilization, high predictability degree of bandwidth allocation,
and low communication delay in the presence of frequent topological changes to
the communication network. Recent studies have shown that existing
implementations cannot guarantee the necessary satisfaction of these timing
requirements. We propose a self-stabilizing MAC algorithm for DynWANs that
guarantees a short convergence period, and by that, it can facilitate the
satisfaction of severe timing requirements, such as the above. Besides the
contribution in the algorithmic front of research, we expect that our proposal
can enable quicker adoption by practitioners and faster deployment of DynWANs
that are subject changes in the network topology
Fly-By-Wireless for Next Generation Aircraft: Challenges and Potential solutions
”Fly-By-Wireless” paradigm based on wireless connectivity in aircraft has the potential to improve efficiency and flexibility, while reducing weight, fuel consumption and maintenance costs. In this paper, first, the opportunities and challenges for wireless technologies in safety-critical avionics context are discussed. Then, the assessment of such technologies versus avionics requirements is provided in order to select the most appropriate one for a wireless aircraft application. As a result, the design of a Wireless Avionics Network based on Ultra WideBand technology is investigated, considering the issues of determinism, reliability and security
Multiple Access in Aerial Networks: From Orthogonal and Non-Orthogonal to Rate-Splitting
Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has
aroused. Specifically, UAVs can be used in cellular networks as aerial users
for delivery, surveillance, rescue search, or as an aerial base station (aBS)
for communication with ground users in remote uncovered areas or in dense
environments requiring prompt high capacity. Aiming to satisfy the high
requirements of wireless aerial networks, several multiple access techniques
have been investigated. In particular, space-division multiple access(SDMA) and
power-domain non-orthogonal multiple access (NOMA) present promising
multiplexing gains for aerial downlink and uplink. Nevertheless, these gains
are limited as they depend on the conditions of the environment. Hence, a
generalized scheme has been recently proposed, called rate-splitting multiple
access (RSMA), which is capable of achieving better spectral efficiency gains
compared to SDMA and NOMA. In this paper, we present a comprehensive survey of
key multiple access technologies adopted for aerial networks, where aBSs are
deployed to serve ground users. Since there have been only sporadic results
reported on the use of RSMA in aerial systems, we aim to extend the discussion
on this topic by modelling and analyzing the weighted sum-rate performance of a
two-user downlink network served by an RSMA-based aBS. Finally, related open
issues and future research directions are exposed.Comment: 16 pages, 6 figures, submitted to IEEE Journa
Application of advanced on-board processing concepts to future satellite communications systems
An initial definition of on-board processing requirements for an advanced satellite communications system to service domestic markets in the 1990's is presented. An exemplar system architecture with both RF on-board switching and demodulation/remodulation baseband processing was used to identify important issues related to system implementation, cost, and technology development
Energy efficient data collection and dissemination protocols in self-organised wireless sensor networks
Wireless sensor networks (WSNs) are used for event detection and data collection in
a plethora of environmental monitoring applications. However a critical factor limits
the extension of WSNs into new application areas: energy constraints. This thesis
develops self-organising energy efficient data collection and dissemination protocols in
order to support WSNs in event detection and data collection and thus extend the use
of sensor-based networks to many new application areas.
Firstly, a Dual Prediction and Probabilistic Scheduler (DPPS) is developed. DPPS
uses a Dual Prediction Scheme combining compression and load balancing techniques
in order to manage sensor usage more efficiently. DPPS was tested and evaluated
through computer simulations and empirical experiments. Results showed that DPPS
reduces energy consumption in WSNs by up to 35% while simultaneously maintaining
data quality and satisfying a user specified accuracy constraint.
Secondly, an Adaptive Detection-driven Ad hoc Medium Access Control (ADAMAC)
protocol is developed. ADAMAC limits the Data Forwarding Interruption problem
which causes increased end-to-end delay and energy consumption in multi-hop sensor
networks. ADAMAC uses early warning alarms to dynamically adapt the sensing
intervals and communication periods of a sensor according to the likelihood of any
new events occurring. Results demonstrated that compared to previous protocols such
as SMAC, ADAMAC dramatically reduces end-to-end delay while still limiting energy
consumption during data collection and dissemination. The protocols developed in this thesis, DPPS and ADAMAC, effectively alleviate
the energy constraints associated with WSNs and will support the extension of sensorbased
networks to many more application areas than had hitherto been readily possible
- …