Comparative Analysis of Spatio and Viterbi Encoding and Decoding Techniques in Hardware Description Language

The paper focuses on the design and synthesis of hardware chip for Spatio and Viterbi encoding and decoding techniques. Both techniques are used for digital data encoding and decoding in transmitter and receiver respectively. These techniques are used for error control coding found in convolution codes. Spatio coding is also used to eliminate crosstalk among interconnect wires, thereby reducing delay. The encoded data is in packet form may be of 2018;N2019; bits. Data is decoded at different clock pluses at which it is encoded. A comparative analysis is done for hardware parameter, timing parameters and device utilization. Design is implemented in Xilinx 14.2 VHDL software, and functional simulation was carried out in Modelsim 10.1 b, student edition. Hardware parameters such as size cost and timings are extracted from the design code

Architectural Support for Efficient Communication in Future Microprocessors

Traditionally, the microprocessor design has focused on the computational aspects of the problem at hand. However, as the number of components on a single chip continues to increase, the design of communication architecture has become a crucial and dominating factor in defining performance models of the overall system. On-chip networks, also known as Networks-on-Chip (NoC), emerged recently as a promising architecture to coordinate chip-wide communication. Although there are numerous interconnection network studies in an inter-chip environment, an intra-chip network design poses a number of substantial challenges to this well-established interconnection network field. This research investigates designs and applications of on-chip interconnection network in next-generation microprocessors for optimizing performance, power consumption, and area cost. First, we present domain-specific NoC designs targeted to large-scale and wire-delay dominated L2 cache systems. The domain-specifically designed interconnect shows 38% performance improvement and uses only 12% of the mesh-based interconnect. Then, we present a methodology of communication characterization in parallel programs and application of characterization results to long-channel reconfiguration. Reconfigured long channels suited to communication patterns enhance the latency of the mesh network by 16% and 14% in 16-core and 64-core systems, respectively. Finally, we discuss an adaptive data compression technique that builds a network-wide frequent value pattern map and reduces the packet size. In two examined multi-core systems, cache traffic has 69% compressibility and shows high value sharing among flows. Compression-enabled NoC improves the latency by up to 63% and saves energy consumption by up to 12%

System-level power optimization:techniques and tools

This tutorial surveys design methods for energy-efficient system-level design. We consider electronic sytems consisting of a hardware platform and software layers. We consider the three major constituents of hardware that consume energy, namely computation, communication, and storage units, and we review methods of reducing their energy consumption. We also study models for analyzing the energy cost of software, and methods for energy-efficient software design and compilation. This survery is organized around three main phases of a system design: conceptualization and modeling design and implementation, and runtime management. For each phase, we review recent techniques for energy-efficient design of both hardware and software

An investigation into adaptive power reduction techniques for neural hardware

In light of the growing applicability of Artificial Neural Network (ANN) in the signal processing field [1] and the present thrust of the semiconductor industry towards lowpower SOCs for mobile devices [2], the power consumption of ANN hardware has become a very important implementation issue. Adaptability is a powerful and useful feature of neural networks. All current approaches for low-power ANN hardware techniques are ‘non-adaptive’ with respect to the power consumption of the network (i.e. power-reduction is not an objective of the adaptation/learning process). In the research work presented in this thesis, investigations on possible adaptive power reduction techniques have been carried out, which attempt to exploit the adaptability of neural networks in order to reduce the power consumption. Three separate approaches for such adaptive power reduction are proposed: adaptation of size, adaptation of network weights and adaptation of calculation precision. Initial case studies exhibit promising results with significantpower reduction

Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

Energy efficient hardware acceleration of multimedia processing tools

The world of mobile devices is experiencing an ongoing trend of feature enhancement and generalpurpose multimedia platform convergence. This trend poses many grand challenges, the most pressing being their limited battery life as a consequence of delivering computationally demanding features. The envisaged mobile application features can be considered to be accelerated by a set of underpinning hardware blocks Based on the survey that this thesis presents on modem video compression standards and their associated enabling technologies, it is concluded that tight energy and throughput constraints can still be effectively tackled at algorithmic level in order to design re-usable optimised hardware acceleration cores. To prove these conclusions, the work m this thesis is focused on two of the basic enabling technologies that support mobile video applications, namely the Shape Adaptive Discrete Cosine Transform (SA-DCT) and its inverse, the SA-IDCT. The hardware architectures presented in this work have been designed with energy efficiency in mind. This goal is achieved by employing high level techniques such as redundant computation elimination, parallelism and low switching computation structures. Both architectures compare favourably against the relevant pnor art in the literature. The SA-DCT/IDCT technologies are instances of a more general computation - namely, both are Constant Matrix Multiplication (CMM) operations. Thus, this thesis also proposes an algorithm for the efficient hardware design of any general CMM-based enabling technology. The proposed algorithm leverages the effective solution search capability of genetic programming. A bonus feature of the proposed modelling approach is that it is further amenable to hardware acceleration. Another bonus feature is an early exit mechanism that achieves large search space reductions .Results show an improvement on state of the art algorithms with future potential for even greater savings