Design of variability compensation architectures of digital circuits with adaptive body bias

The most critical concern in circuit is to achieve high level of performance with very tight power constraint. As the high performance circuits moved beyond 45nm technology one of the major issues is the parameter variation i.e. deviation in process, temperature and voltage (PVT) values from nominal specifications. A key process parameter subject to variation is the transistor threshold voltage (Vth) which impacts two important parameters: frequency and leakage power. Although the degradation can be compensated by the worstcase scenario based over-design approach, it induces remarkable power and performance overhead which is undesirable in tightly constrained designs. Dynamic voltage scaling (DVS) is a more power efficient approach, however its coarse granularity implies difficulty in handling fine grained variations. These factors have contributed to the growing interest in power aware robust circuit design. We propose a variability compensation architecture with adaptive body bias, for low power applications using 28nm FDSOI technology. The basic approach is based on a dynamic prediction and prevention of possible circuit timing errors. In our proposal we are using a Canary logic technique that enables the typical-case design. The body bias generation is based on a DLL type method which uses an external reference generator and voltage controlled delay line (VCDL) to generate the forward body bias (FBB) control signals. The adaptive technique is used for dynamic detection and correction of path failures in digital designs due to PVT variations. Instead of tuning the supply voltage, the key idea of the design approach is to tune the body bias voltage bymonitoring the error rate during operation. The FBB increases operating speed with an overhead in leakage power

Dynamic Voltage Scaling Aware Delay Fault Testing

The application of Dynamic Voltage Scaling (DVS) to reduce energy consumption may have a detrimental impact on the quality of manufacturing tests employed to detect permanent faults. This paper analyses the influence of different voltage/frequency settings on fault detection within a DVS application. In particular, the effect of supply voltage on different types of delay faults is considered. This paper presents a study of these problems with simulation results. We have demonstrated that the test application time increases as we reduce the test voltage. We have also shown that for newer technologies we do not have to go to very low voltage levels for delay fault testing. We conclude that it is necessary to test at more than one operating voltage and that the lowest operating voltage does not necessarily give the best fault cover

High-Performance Ternary (4:2) Compressor Based on Capacitive Threshold Logic

This paper presents a ternary (4:2) compressor, which is an important component in multiplication. However, the structure differs from the binary counterpart since the ternary model does not require carry signals. The method of capacitive threshold logic (CTL) is used to achieve the output signals directly. Unlike the previously presented similar structure, the entire capacitor network is divided into two parts. This segregation results in higher reliability and robustness against unwanted process, voltage, and temperature (PVT) variations. Simulations are performed by HSPICE and 32nm CNFET technology. Simulation results demonstrate about 94% higher performance in terms of power-delay product (PDP) for the new design over the previous one

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

High Performance Digital Circuit Techniques

Achieving high performance is one of the most difficult challenges in designing digital circuits. Flip-flops and adders are key blocks in most digital systems and must therefore be designed to yield highest performance. In this thesis, a new high performance serial adder is developed while power consumption is attained. Also, a statistical framework for the design of flip-flops is introduced that ensures that such sequential circuits meet timing yield under performance criteria. Firstly, a high performance serial adder is developed. The new adder is based on the idea of having a constant delay for the addition of two operands. While conventional adders exhibit logarithmic delay, the proposed adder works at a constant delay order. In addition, the new adder's hardware complexity is in a linear order with the word length, which consequently exhibits less area and power consumption as compared to conventional high performance adders. The thesis demonstrates the underlying algorithm used for the new adder and followed by simulation results. Secondly, this thesis presents a statistical framework for the design of flip-flops under process variations in order to maximize their timing yield. In nanometer CMOS technologies, process variations significantly impact the timing performance of sequential circuits which may eventually cause their malfunction. Therefore, developing a framework for designing such circuits is inevitable. Our framework generates the values of the nominal design parameters; i.e., the size of gates and transmission gates of flip-flop such that maximum timing yield is achieved for flip-flops. While previous works focused on improving the yield of flip-flops, less research was done to improve the timing yield in the presence of process variations

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

An Ultra-Low-Power 75mV 64-Bit Current-Mode Majority-Function Adder

Ultra-low-power circuits are becoming more desirable due to growing portable device markets and they are also becoming more interesting and applicable today in biomedical, pharmacy and sensor networking applications because of the nano-metric scaling and CMOS reliability improvements. In this thesis, three main achievements are presented in ultra-low-power adders. First, a new majority function algorithm for carry and the sum generation is presented. Then with this algorithm and implied new architecture, we achieved a circuit with 75mV supply voltage operation. Last but not least, a 64 bit current-mode majority-function adder based on the new architecture and algorithm is successfully tested at 75mV supply voltage. The circuit consumed 4.5nW or 3.8pJ in one of the worst conditions

Design and Analysis of Improved Domino Logic with Noise Tolerance and High Performance

The demands of upcoming computing, as well as the challenges of nanometer-era of VLSI design necessitate new digital logic techniques and styles that are at the same time high performance, energy efficient and robust to noise and variation. Dynamic CMOS logic gates are broadly used to design high performance circuits due to their high speed. Conversely, the vital demerit of dynamic logic style is its high noise sensitivity. The main reason for this is the sub-threshold leakage current flowing through the pull down network. With continuous technology scaling, this problem is getting more and more severe. In this thesis, a new noise tolerant dynamic CMOS circuit technique is proposed. In the proposed work, we have enhanced the behavior of the domino CMOS logic. This technique also gets benefit in terms of delay and power. This thesis describes the new low power, noise tolerant and high speed domino logic technique and presents a comparison result of this logic with previously reported schemes. Simulation results prove that, in 180 nm CMOS technology when we used this logic style to realize wide fan-in logic gates, it could achieve maximum level of noise robustness as compared to its basic counterpart. In addition, the logic also works efficiently with sequential circuits. The feasibility of this new technique is demonstrated by means of a real hardware, we have built a custom test-chip in the UMC 180 nm process technology with an ALU core, using the proposed domino logic style for each design block. In this thesis, we have also described the design and implementation of this chip. In addition to this, we have also presented initial power and delay performance comparisons between the circuit level simulated ALU and test-chip implemented in the proposed domino logic style. Finally we conclude that, the thesis contributes a very efficient logic style for wide fan-in gates, which is not only noise robust but also energy efficient and high speed