7,461 research outputs found
Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks
Conventional cellular wireless networks were designed with the purpose of
providing high throughput for the user and high capacity for the service
provider, without any provisions of energy efficiency. As a result, these
networks have an enormous Carbon footprint. In this paper, we describe the
sources of the inefficiencies in such networks. First we present results of the
studies on how much Carbon footprint such networks generate. We also discuss
how much more mobile traffic is expected to increase so that this Carbon
footprint will even increase tremendously more. We then discuss specific
sources of inefficiency and potential sources of improvement at the physical
layer as well as at higher layers of the communication protocol hierarchy. In
particular, considering that most of the energy inefficiency in cellular
wireless networks is at the base stations, we discuss multi-tier networks and
point to the potential of exploiting mobility patterns in order to use base
station energy judiciously. We then investigate potential methods to reduce
this inefficiency and quantify their individual contributions. By a
consideration of the combination of all potential gains, we conclude that an
improvement in energy consumption in cellular wireless networks by two orders
of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843
A Digital Predistortion Scheme Exploiting Degrees-of-Freedom for Massive MIMO Systems
The primary source of nonlinear distortion in wireless transmitters is the
power amplifier (PA). Conventional digital predistortion (DPD) schemes use
high-order polynomials to accurately approximate and compensate for the
nonlinearity of the PA. This is not practical for scaling to tens or hundreds
of PAs in massive multiple-input multiple-output (MIMO) systems. There is more
than one candidate precoding matrix in a massive MIMO system because of the
excess degrees-of-freedom (DoFs), and each precoding matrix requires a
different DPD polynomial order to compensate for the PA nonlinearity. This
paper proposes a low-order DPD method achieved by exploiting massive DoFs of
next-generation front ends. We propose a novel indirect learning structure
which adapts the channel and PA distortion iteratively by cascading adaptive
zero forcing precoding and DPD. Our solution uses a 3rd order polynomial to
achieve the same performance as the conventional DPD using an 11th order
polynomial for a 100x10 massive MIMO configuration. Experimental results show a
70% reduction in computational complexity, enabling ultra-low latency
communications.Comment: IEEE International Conference on Communications 201
Decentralized Delay Optimal Control for Interference Networks with Limited Renewable Energy Storage
In this paper, we consider delay minimization for interference networks with
renewable energy source, where the transmission power of a node comes from both
the conventional utility power (AC power) and the renewable energy source. We
assume the transmission power of each node is a function of the local channel
state, local data queue state and local energy queue state only. In turn, we
consider two delay optimization formulations, namely the decentralized
partially observable Markov decision process (DEC-POMDP) and Non-cooperative
partially observable stochastic game (POSG). In DEC-POMDP formulation, we
derive a decentralized online learning algorithm to determine the control
actions and Lagrangian multipliers (LMs) simultaneously, based on the policy
gradient approach. Under some mild technical conditions, the proposed
decentralized policy gradient algorithm converges almost surely to a local
optimal solution. On the other hand, in the non-cooperative POSG formulation,
the transmitter nodes are non-cooperative. We extend the decentralized policy
gradient solution and establish the technical proof for almost-sure convergence
of the learning algorithms. In both cases, the solutions are very robust to
model variations. Finally, the delay performance of the proposed solutions are
compared with conventional baseline schemes for interference networks and it is
illustrated that substantial delay performance gain and energy savings can be
achieved
H2-ARQ-relaying: spectrum and energy efficiency perspectives
In this paper, we propose novel Hybrid Automatic Repeat re-Quest (HARQ) strategies used in conjunction with hybrid relaying schemes, named as H2-ARQ-Relaying. The strategies allow the relay to dynamically switch between amplify-and-forward/compress-and-forward and decode-and-forward schemes according to its decoding status. The performance analysis is conducted from both the spectrum and energy efficiency perspectives. The spectrum efficiency of the proposed strategies, in terms of the maximum throughput, is significantly improved compared with their non-hybrid counterparts under the same constraints. The consumed energy per bit is optimized by manipulating the node activation time, the transmission energy and the power allocation between the source and the relay. The circuitry energy consumption of all involved nodes is taken into consideration. Numerical results shed light on how and when the energy efficiency can be improved in cooperative HARQ. For instance, cooperative HARQ is shown to be energy efficient in long distance transmission only. Furthermore, we consider the fact that the compress-and-forward scheme requires instantaneous signal to noise ratios of all three constituent links. However, this requirement can be impractical in some cases. In this regard, we introduce an improved strategy where only partial and affordable channel state information feedback is needed
Power Efficient and Secure Multiuser Communication Systems with Wireless Information and Power Transfer
In this paper, we study resource allocation algorithm design for power
efficient secure communication with simultaneous wireless information and power
transfer (WIPT) in multiuser communication systems. In particular, we focus on
power splitting receivers which are able to harvest energy and decode
information from the received signals. The considered problem is modeled as an
optimization problem which takes into account a minimum required
signal-to-interference-plus-noise ratio (SINR) at multiple desired receivers, a
maximum tolerable data rate at multiple multi-antenna potential eavesdroppers,
and a minimum required power delivered to the receivers. The proposed problem
formulation facilitates the dual use of artificial noise in providing efficient
energy transfer and guaranteeing secure communication. We aim at minimizing the
total transmit power by jointly optimizing transmit beamforming vectors, power
splitting ratios at the desired receivers, and the covariance of the artificial
noise. The resulting non-convex optimization problem is transformed into a
semidefinite programming (SDP) and solved by SDP relaxation. We show that the
adopted SDP relaxation is tight and achieves the global optimum of the original
problem. Simulation results illustrate the significant power saving obtained by
the proposed optimal algorithm compared to suboptimal baseline schemes.Comment: Accepted for presentation at the IEEE International Conference on
Communications (ICC), Sydney, Australia, 201
Symbol-Level Multiuser MISO Precoding for Multi-level Adaptive Modulation
Symbol-level precoding is a new paradigm for multiuser downlink systems which
aims at creating constructive interference among the transmitted data streams.
This can be enabled by designing the precoded signal of the multiantenna
transmitter on a symbol level, taking into account both channel state
information and data symbols. Previous literature has studied this paradigm for
MPSK modulations by addressing various performance metrics, such as power
minimization and maximization of the minimum rate. In this paper, we extend
this to generic multi-level modulations i.e. MQAM and APSK by establishing
connection to PHY layer multicasting with phase constraints. Furthermore, we
address adaptive modulation schemes which are crucial in enabling the
throughput scaling of symbol-level precoded systems. In this direction, we
design signal processing algorithms for minimizing the required power under
per-user SINR or goodput constraints. Extensive numerical results show that the
proposed algorithm provides considerable power and energy efficiency gains,
while adapting the employed modulation scheme to match the requested data rate
Performance analysis of feedback-free collision resolution NDMA protocol
To support communications of a large number of deployed devices while guaranteeing limited signaling load, low energy consumption, and high reliability, future cellular systems require efficient random access protocols. However, how to address the collision resolution at the receiver is still the main bottleneck of these protocols. The network-assisted diversity multiple access (NDMA) protocol solves the issue and attains the highest potential throughput at the cost of keeping devices active to acquire feedback and repeating transmissions until successful decoding. In contrast, another potential approach is the feedback-free NDMA (FF-NDMA) protocol, in which devices do repeat packets in a pre-defined number of consecutive time slots without waiting for feedback associated with repetitions. Here, we investigate the FF-NDMA protocol from a cellular network perspective in order to elucidate under what circumstances this scheme is more energy efficient than NDMA. We characterize analytically the FF-NDMA protocol along with the multipacket reception model and a finite Markov chain. Analytic expressions for throughput, delay, capture probability, energy, and energy efficiency are derived. Then, clues for system design are established according to the different trade-offs studied. Simulation results show that FF-NDMA is more energy efficient than classical NDMA and HARQ-NDMA at low signal-to-noise ratio (SNR) and at medium SNR when the load increases.Peer ReviewedPostprint (published version
- …