Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture

We propose two new repair techniques for hybrid nano/CMOS computing architecture with lookup table based Boolean logic. Our proposed techniques use tagging mechanism to provide high level of defect tolerance and we present theoretical equations to predict the repair capability including an estimate of the repair cost. The repair techniques are efficient in utilization of spare units and capable of targeting upto 20% defect rates, which is higher than recently reported repair techniques

Fault Secure Encoder and Decoder for NanoMemory Applications

Memory cells have been protected from soft errors for more than a decade; due to the increase in soft error rate in logic circuits, the encoder and decoder circuitry around the memory blocks have become susceptible to soft errors as well and must also be protected. We introduce a new approach to design fault-secure encoder and decoder circuitry for memory designs. The key novel contribution of this paper is identifying and defining a new class of error-correcting codes whose redundancy makes the design of fault-secure detectors (FSD) particularly simple. We further quantify the importance of protecting encoder and decoder circuitry against transient errors, illustrating a scenario where the system failure rate (FIT) is dominated by the failure rate of the encoder and decoder. We prove that Euclidean geometry low-density parity-check (EG-LDPC) codes have the fault-secure detector capability. Using some of the smaller EG-LDPC codes, we can tolerate bit or nanowire defect rates of 10% and fault rates of 10^(-18) upsets/device/cycle, achieving a FIT rate at or below one for the entire memory system and a memory density of 10^(11) bit/cm^2 with nanowire pitch of 10 nm for memory blocks of 10 Mb or larger. Larger EG-LDPC codes can achieve even higher reliability and lower area overhead

Asynchronous nanowire crossbar architecture for manufacturability, modularity and robustness

This thesis spotlights the dawn of a promising new nanowire crossbar architecture, the Asynchronous crossbar architecture, in the form of three different articles. It combines the reduced size of the nanowire crossbar architecture with the clock-free nature of Null Conventional Logic, which are the primary advantages. The first paper explains the proposed architecture with illustrations, including the design of an optimized full adder. This architecture has an elementary structure termed as a Programmable Gate Macro Block (PGMB) which is analogous to a threshold gate in NCL. The other two papers concentrate on mapping and placement techniques which are important due to defects involved in crossbars. These defects have to be tolerated and logic has to be routed appropriately for successful functioning of the circuit --Introduction, page 1

On Finding a Defect-free Component in Nanoscale Crossbar Circuits

AbstractWe propose a technique for the analysis of manufacturing yield of nano-crossbar architectures for different values of defect percentage and crossbar-size. We provide an estimate of the minimum-size crossbar to be fabricated wherein a defect-free crossbar of a given size can always be found with a guaranteed yield. Our technique is based on logical merging of two defective rows (or two columns) that emulate a defect-free row (or column). Experimental results show that the proposed method provides higher defect-tolerance compared to that of previous techniques

CMOL: Second Life for Silicon?

This report is a brief review of the recent work on architectures for the prospective hybrid CMOS/nanowire/ nanodevice ("CMOL") circuits including digital memories, reconfigurable Boolean-logic circuits, and mixed-signal neuromorphic networks. The basic idea of CMOL circuits is to combine the advantages of CMOS technology (including its flexibility and high fabrication yield) with the extremely high potential density of molecular-scale two-terminal nanodevices. Relatively large critical dimensions of CMOS components and the "bottom-up" approach to nanodevice fabrication may keep CMOL fabrication costs at affordable level. At the same time, the density of active devices in CMOL circuits may be as high as 1012 cm2 and that they may provide an unparalleled information processing performance, up to 1020 operations per cm2 per second, at manageable power consumption.Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions

Logic synthesis and testing techniques for switching nano-crossbar arrays

Beyond CMOS, new technologies are emerging to extend electronic systems with features unavailable to silicon-based devices. Emerging technologies provide new logic and interconnection structures for computation, storage and communication that may require new design paradigms, and therefore trigger the development of a new generation of design automation tools. In the last decade, several emerging technologies have been proposed and the time has come for studying new ad-hoc techniques and tools for logic synthesis, physical design and testing. The main goal of this project is developing a complete synthesis and optimization methodology for switching nano-crossbar arrays that leads to the design and construction of an emerging nanocomputer. New models for diode, FET, and four-terminal switch based nanoarrays are developed. The proposed methodology implements logic, arithmetic, and memory elements by considering performance parameters such as area, delay, power dissipation, and reliability. With combination of logic, arithmetic, and memory elements a synchronous state machine (SSM), representation of a computer, is realized. The proposed methodology targets variety of emerging technologies including nanowire/nanotube crossbar arrays, magnetic switch-based structures, and crossbar memories. The results of this project will be a foundation of nano-crossbar based circuit design techniques and greatly contribute to the construction of emerging computers beyond CMOS. The topic of this project can be considered under the research area of â\u80\u9cEmerging Computing Modelsâ\u80\u9d or â\u80\u9cComputational Nanoelectronicsâ\u80\u9d, more specifically the design, modeling, and simulation of new nanoscale switches beyond CMOS

Functional testing of faults in asynchronous crossbar architecture

The challenge of extending Moore\u27s Law past the physical limits of the present semiconductor technology calls for novel innovations. Several novel nanotechnologies are being proposed as an alternative to their CMOS counterparts, with nanowire crossbar being one of the most promising paradigms. Quite recently, a new promising clock-free architecture, called the Asynchronous Crossbar Architecture has been proposed to enhance the manufacturability and to improve the robustness of digital circuits by removing various timing related failure modes. Even though the proposed clock-free architecture offers several merits, it is not free from the high defect rates induced due to nondeterministic nanoscale assembly. In this work, a unique Functional Test Algorithm (FTA) has been proposed and validated to test for manufacturing defects in this architecture. The proposed Functional Test Algorithm is aimed at reducing the testing overhead in terms of the time and space complexity associated with the existing sequential test scheme. In addition, it is designed to provide high fault coverage and excellent fault-tolerance via post-reconfiguration. This test scheme can be effectively used to assure true functionality of any threshold gate realized on a given PGMB. The main motivation behind this research is to propose a comprehensive test scheme which can achieve sufficiently high test coverage with acceptable test overhead. This test algorithm is a significant effort towards viable nanoscale computation --Abstract, page iv

Fault-tolerance techniques for hybrid CMOS/nanoarchitecture

The authors propose two fault-tolerance techniques for hybrid CMOS/nanoarchitecture implementing logic functions as look-up tables. The authors compare the efficiency of the proposed techniques with recently reported methods that use single coding schemes in tolerating high fault rates in nanoscale fabrics. Both proposed techniques are based on error correcting codes to tackle different fault rates. In the first technique, the authors implement a combined two-dimensional coding scheme using Hamming and Bose-Chaudhuri-Hocquenghem (BCH) codes to address fault rates greater than 5. In the second technique, Hamming coding is complemented with bad line exclusion technique to tolerate fault rates higher than the first proposed technique (up to 20). The authors have also estimated the improvement that can be achieved in the circuit reliability in the presence of Don-t Care Conditions. The area, latency and energy costs of the proposed techniques were also estimated in the CMOS domain