Energy Efficient Large Scale Antenna Systems for 5G Communications and Beyond

The increasing popularity of mobile devices has fueled an exponential growth in data traffic. This phenomenon has led to the development of systems that achieve higher spectral efficiencies, at the cost of higher power consumptions. Consequently, the investigation on solutions that allow to increase the maximum throughput together with the energy efficiency becomes crucial for modern wireless systems. This thesis aims to improve the trade-off between performances and power consumption with special focus toward multiuser multiple-antenna communications, due to their promising benefits in terms of spectral efficiency. Research envisaged massive Multi-Input-Multi-Output (MIMO) systems as the main technology to meet these data traffic demands, as very large arrays lead to unprecedented data throughputs and beamforming gains. However, larger arrays lead to increased power consumption and hardware complexity, as each radiating element requires a radio frequency chain, which is accountable for the highest percentage of the total power consumption. Nonetheless, the availability of a large number of antennas unveils the possibility to wisely select a subset of radiating elements. This thesis shows that multiuser interference can be exploited to increase the received power, with significant circuit power savings at the base station. Similarly, millimeter-wave communications experienced raising interest among the scientific community because of their multi-GHz bandwidth and their ability to place large arrays in limited physical spaces. Millimeter-wave systems inherit same benefits and weaknesses of massive MIMO communications. However, antenna selection is not viable in millimeter-wave communications because they rely on high beamforming gains. Therefore, this thesis proposes a scheme that is able to reduce the number of radio frequency chains required, while achieving close-to-optimal performances. Analytical and numerical results show that the proposed techniques are able to improve the overall energy efficiency with respect to the state-of-the-art, hence proving to be valid candidates for practical implementations of modern communication systems

Low-complexity antenna selection techniques for massive MIMO systems

PhD ThesisMassive Multiple-Input Multiple-Output (M-MIMO) is a state of the art technology in wireless communications, where hundreds of antennas are exploited at the base station (BS) to serve a much smaller number of users. Employing large antenna arrays can improve the performance dramatically in terms of the achievable rates and radiated energy, however, it comes at the price of increased cost, complexity, and power consumption. To reduce the hardware complexity and cost, while maintaining the advantages of M-MIMO, antenna selection (AS) techniques can be applied where only a subset of the available antennas at the BS are selected. Optimal AS can be obtained through exhaustive search, which is suitable for conventional MIMO systems, but is prohibited for systems with hundreds of antennas due to its enormous computational complexity. Therefore, this thesis address the problem of designing low complexity AS algorithms for multi-user (MU) M-MIMO systems. In chapter 3, different evolutionary algorithms including bio-inspired, quantuminspired, and heuristic methods are applied for AS in uplink MU M-MIMO systems. It was demonstrated that quantum-inspired and heuristic methods outperform the bio-inspired techniques in terms of both complexity and performance. In chapter 4, a downlink MU M-MIMO scenario is considered with Matched Filter (MF) precoding. Two novel AS algorithms are proposed where the antennas are selected without any vector multiplications, which resulted in a dramatic complexity reduction. The proposed algorithms outperform the case where all antennas are activated, in terms of both energy and spectral efficiencies. In chapter 5, three AS algorithms are designed and utilized to enhance the performance of cell-edge users, alongside Max-Min power allocation control. The algorithms aim to either maximize the channel gain, or minimize the interference for the worst-case user only. The proposed methods in this thesis are compared with other low complexity AS schemes and showed a great performance-complexity trade-off

Low RF-Complexity Millimeter-Wave Beamspace-MIMO Systems by Beam Selection

Communications in millimeter-wave (mm-wave) spectrum (30-300 GHz) have experienced a continuous increase in relevance for short-range, high-capacity wireless links, because of the wider bandwidths they are able to provide. In this work, we introduce a new mm-wave frequency transmission scheme that exploits a combination of the concepts of beamspace multi-input multi-output (B-MIMO) communications and beam selection to provide near-optimal performances with a low hardware-complexity transceiver. While large-scale MIMO approaches in mm-wave are affected by high dimensional signal space that increases considerably both complexity and costs of the system, the proposed scheme is able to achieve near-optimal performances with a reduced radio-frequency (RF) complexity thanks to beam selection. We evaluate the advantages of the proposed scheme via capacity computations, comparisons of numbers of RF chains required and by studying the trade-off between spectral and power efficiency. Our analytical and simulation results show that the proposed scheme is capable of offering a significant reduction in RF complexity with a realistic low-cost approach, for a given performance. In particular, we show that the proposed beam selection algorithms achieve higher power efficiencies than a full system where all beams are utilized

User selection for massive MIMO under line-of-sight propagation

This paper provides a review of user selection algorithms for massive multiple-input multiple-output (MIMO) systems under the line-of-sight (LoS) propagation model. Although the LoS propagation is extremely important to some promising technologies, like in millimeter-wave communications, massive MIMO systems are rarely studied under this propagation model. This paper fills this gap by providing a comprehensive study encompassing several user selection algorithms, different linear precoders and simulation setups, and also considers the effect of partial channel state information (CSI). One important result is the existence of practical cases in which the LoS propagation model may lead to significant levels of interference among users within a cell; these cases are not satisfactorily addressed by the existing user selection algorithms. Motivated by this issue, a new user selection algorithm based on inter-channel interference (ICI) called ICI-based selection (ICIBS) is proposed. Unlike other techniques, the ICIBS accounts for the ICI in a global manner, thus yielding better results, especially in cases where there are many users interfering with each other. In such scenarios, simulation results show that when compared to the competing algorithms, the proposed approach provided an improvement of at least 10.9% in the maximum throughput and 7.7% in the 95%-probability throughput when half of the users were selected

Adaptive Communication for Wireless Massive MIMO Systems

The demand for high data rates in wireless communications is increasing rapidly. One way to provide reliable communication with increased rates is massive multiple-input multiple-output (MIMO) systems where a large number of antennas is deployed. We analyze three systems utilizing a large number of antennas to provide enhancement in the performance of wireless communications. First, we consider a general form of spatial modulation (SM) systems where the number of transmitted data streams is allowed to vary and we refer to it as generalized spatial modulation with multiplexing (GSMM). A Gaussian mixture model (GMM) is shown to accurately model the transmitted spatially modulated signal using a precoding framework. Using this transmit model, a general closed-form expression for the achievable rate when operating over Rayleigh fading channels is evaluated along with a tight upper and a lower bounds for the achievable rate. The obtained expressions are flexible enough to accommodate any form of SM by adjusting the precoding set. Followed by that, we study quantized distributed wireless relay networks where a relay consisting of many geographically dispersed nodes is facilitating communication between unconnected users. Due to bandwidth constraints, distributed relay networks perform quantization at the relay nodes, and hence they are referred to as quantized distributed relay networks. In such systems, users transmit their data simultaneously to the relay nodes through the uplink channel that quantize their observed signals independently to a few bits and broadcast these bits to the users through the downlink channel. We develop algorithms that can be employed by the users to estimate the uplink channels between all users and all relay nodes when the relay nodes are performing simple sign quantization. This setup is very useful in either extending coverage to unconnected regions or replacing the existing wireless infrastructure in case of disasters. Using the uplink channel estimates, we propose multiple decoders that can be deployed at the receiver side. We also study the performance of each of these decoders under different system assumptions. A different quantization framework is also proposed for quantized distributed relay networking where the relay nodes perform vector quantization instead of sign quantization. Applying vector quantization at the relay nodes enables us to propose an algorithm that allocates quantization resources efficiently among the relay nodes inside the relay network. We also study the beamforming design at the users’ side in this case where beamforming design is not trivial due to the quantization that occurs at the relay network. Finally, we study a different setup of distributed communication systems called cell-free massive MIMO. In cell-free massive MIMO, regular cellular communication is replaced by multiple access points (APs) that are placed randomly over the coverage area. All users in the coverage area are sharing time and frequency resources and all APs are serving all UEs while power allocation is done in a central processor that is connected to the APs through a high speed backhaul network. We study the power allocation in cell-free massive MIMO system where APs are equipped with few antennas and how the distribution of the available antennas among access points affects both the performance and the infrastructure cost

Interference driven antenna selection for Massive Multi-User MIMO

Low-complexity linear precoders are known to be close-to-optimal for massive multi-input multi-output (M-MIMO) systems. However, the large number of antennas at the transmitter imposes high computational burdens and high hardware overloads. In line with the above, in this paper we propose a low complexity antenna selection (AS) scheme which selects the antennas that maximize constructive interference between the users. Our analyses show that the proposed AS algorithm, in combination with a simple matched filter (MF) precoder at the transmitter, is able to achieve better performances than systems equipped with a more complex channel inversion (CI) precoder and computationally expensive AS techniques. First, we give an analytical definition of constructive and destructive interference, based on the phase of the received signals from phase-shifted-keying (PSK) modulated transmissions. Then, we introduce the proposed antenna selection algorithm, which identifies the antenna subset with the highest constructive interference, maximizing the power received by the user. In our studies, we derive the computational burden of the proposed technique with a rigorous and thorough analysis and we identify a closed form expression of the upper bound received power at the user side. In addition, we evaluate in detail the power benefits of the proposed transmission scheme by defining an efficiency metric based on the achieved throughput. The results presented in this paper prove that antenna selection and green radio concepts can be jointly used for power efficient M-MIMO, as they lead to significant power savings and complexity reductions

Optimized Precoders for Massive MIMO OFDM Dual Radar-Communication Systems

This paper considers the optimization of a dual-functional radar and communication (RadCom) system with the objective is to maximize its sum-rate (SR) and energy-efficiency (EE) while satisfying certain radar target detection and data rate per user requirements. To this end, novel RadCom precoder schemes that can exploit downlink radar interference are devised for massive multiple-input-multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) systems. First, the communication capacity and radar detection performance metrics of these schemes are analytically evaluated. Then, using the derived results, optimum beam power allocation schemes are deduced to maximize SR and EE with modest computational complexity. The validity of the analytical results is confirmed via matching computer simulations. It is also shown that, compared to benchmark techniques, the devised precoders can achieve substantial improvements in terms of both SR and EE