Active fault-tolerant control of nonlinear systems with wind turbine application

The thesis concerns the theoretical development of Active Fault-Tolerant Control (AFTC) methods for nonlinear system via T-S multiple-modelling approach. The thesis adopted the estimation and compensation approach to AFTC within a tracking control framework. In this framework, the thesis considers several approaches to robust T-S fuzzy control and T-S fuzzy estimation: T-S fuzzy proportional multiple integral observer (PMIO); T-S fuzzy proportional-proportional integral observer (PPIO); T-S fuzzy virtual sensor (VS) based AFTC; T-S fuzzy Dynamic Output Feedback Control TSDOFC; T-S observer-based feedback control; Sliding Mode Control (SMC). The theoretical concepts have been applied to an offshore wind turbine (OWT) application study. The key developments that present in this thesis are:• The development of three active Fault Tolerant Tracking Control (FTTC) strategies for nonlinear systems described via T-S fuzzy inference modelling. The proposals combine the use of Linear Reference Model Fuzzy Control (LRMFC) with either the estimation and compensation concept or the control reconfiguration concept.• The development of T-S fuzzy observer-based state estimate fuzzy control strategy for nonlinear systems. The developed strategy has the capability to tolerate simultaneous actuator and sensor faults within tracking and regulating control framework. Additionally, a proposal to recover the Separation Principle has also been developed via the use of TSDOFC within the FTTC framework.• The proposals of two FTTC strategies based on the estimation and compensation concept for sustainable OWTs control. The proposals have introduced a significant attribute to the literature of sustainable OWTs control via (1) Obviating the need for Fault Detection and Diagnosis (FDD) unit, (2) Providing useful information to evaluate fault severity via the fault estimation signals.• The development of FTTC architecture for OWTs that combines the use of TSDOFC and a form of cascaded observers (cascaded analytical redundancy). This architecture is proposed in order to ensure the robustness of both the TSDOFC and the EWS estimator against the generator and rotor speed sensor faults.• A sliding mode baseline controller has been proposed within three FTTC strategies for sustainable OWTs control. The proposals utilise the inherent robustness of the SMC to tolerate some matched faults without the need for analytical redundancy. Following this, the combination of SMC and estimation and compensation framework proposed to ensure the close-loop system robustness to various faults.• Within the framework of the developed T-S fuzzy based FTTC strategies, a new perspective to reduce the T-S fuzzy control design conservatism problem has been proposed via the use of different control techniques that demand less design constraints. Moreover, within the SMC based FTTC, an investigation is given to demonstrate the SMC robustness against a wider than usual set of faults is enhanced via designing the sliding surface with minimum dimension of the feedback signals

Hierarchical robust fuzzy sliding mode control for a class of simo under-actuated systems with mismatched uncertainties

The development of the algorithms for single input multi output (SIMO) under-actuated systems with mismatched uncertainties is important. Hierarchical sliding-mode controller (HSMC) has been successfully employed to control SIMO under-actuated systems with mismatched uncertainties in a hierarchical manner with the use of sliding mode control. However, in such a control scheme, the chattering phenomenon is its main disadvantage. To overcome the above disadvantage, in this paper, a new compound control scheme is proposed for SIMO under-actuated based on HSMC and fuzzy logic control (FLC). By using the HSMC approach, a sliding control law is derived so as to guarantee the stability and robustness under various environments. The FLC as the second controller completely removes the chattering signal caused by the sign function in the sliding control law. The results are verified through theoretical proof and simulation software of MATLAB through two systems Pendubot and series double inverted pendulum

Modified PSO based PID Sliding Mode Control using Improved Reaching Law for Nonlinear systems

In this paper, a new model based nonlinear control technique, called PID (Proportional-Integral-Derivative) type sliding surface based sliding mode control is designed using improved reaching law. To improve the performance of the second order nonlinear differential equations with unknown parameters modified particle swarm intelligent optimization (MPSO) is used for the optimized parameters. This paper throws light on the sliding surface design, on the proposed power rate exponential reaching law, parameters optimization using modified particle swarm optimization and highlights the important features of adding an integral term in the sliding mode such as robustness and higher convergence, through extensive mathematical modeling. Siding mode control law is derived using Lyapunov stability approach and its asymptotic stability is proved mathematically and simulations showing its validity. MPSO PID-type Sliding mode control will stabilize the highly nonlinear systems, will compensate disturbances and uncertainty and reduces tracking errors. Simulations and experimental application is done on the non-linear systems and are presented to make a quantitative comparison.Comment: arXiv admin note: substantial text overlap with arXiv:2207.1112

Evolutionary Networks for Multi-Behavioural Robot Control : A thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Computer Science Massey University, Albany, New Zealand

Artificial Intelligence can be applied to a wide variety of real world problems, with varying levels of complexity; nonetheless, real world problems often demand for capabilities that are difficult, if not impossible to achieve using a single Artificial Intelligence algorithm. This challenge gave rise to the development of hybrid systems that put together a combination of complementary algorithms. Hybrid approaches come at a cost however, as they introduce additional complications for the developer, such as how the algorithms should interact and when the independent algorithms should be executed. This research introduces a new algorithm called Cascading Genetic Network Programming (CGNP), which contains significant changes to the original Genetic Network Programming. This new algorithm has the facility to include any Artificial Intelligence algorithm into its directed graph network, as either a judgement or processing node. CGNP introduces a novel ability for a scalable multiple layer network, of independent instances of the CGNP algorithm itself. This facilitates problem subdivision, independent optimisation of these underlying layers and the ability to develop varying levels of complexity, from individual motor control to high level dynamic role allocation systems. Mechanisms are incorporated to prevent the child networks from executing beyond their requirement, allowing the parent to maintain control. The ability to optimise any data within each node is added, allowing for general purpose node development and therefore allowing node reuse in a wide variety of applications without modification. The abilities of the Cascaded Genetic Network Programming algorithm are demonstrated and proved through the development of a multi-behavioural robot soccer goal keeper, as a testbed where an individual Artificial Intelligence system may not be sufficient. The overall role is subdivided into three components and individually optimised which allow the robot to pursue a target object or location, rotate towards a target and provide basic functionality for defending a goal. These three components are then used in a higher level network as independent nodes, to solve the overall multi- behavioural goal keeper. Experiments show that the resulting controller defends the goal with a success rate of 91%, after 12 hours training using a population of 400 and 60 generations

Control of Cart-Inverted Pendulum System Using Pole Placement

The Cart Inverted Pendulum system has many real life applications like missile launching,balancing systems like human walking,aircraft landing pad in sea etc.Moreover this is a highly unstable and non-linear system and so designing a controller to bring the system to a stable condition is a challenging task.This thesis includes system and hardware description of Inverted Pendulum System,dynamics of the system and its state space model.In this thesis,pole placement methods like two-loop PID and PID+PI have been implemented for Inverted Pendulum System and this control strategies gives stable responses.With the recent devel-opment of LMIs tool,regional pole placement can achieve the goal as well.A regional pole placement controller is also synthesized, where desired specifications are transformed into LMI regions.In present case,a conical sector in the left half plane is taken and the method is implemented. Lastly,a reduced order controller is also designed and its bode magnitude plot is compared with that of the full order controller.The reduced order simplification method has an almost identical frequency response,showing that it can be utilized as well for stabilizing the CIPS

Saturable absorption measurement of platinum as saturable absorber by using twin detector method based on mode-locked fiber laser

This paper illustrates the absorption measurement of Pt as saturable absorber (SA) by using mode-locked fiber laser system. The SA is fabricated by depositing 10 nm of Pt on the fiber ferrules using sputtering method. The absorption measurement of Pt is characterised by employing a balanced twin detector method based on mode-locked fiber laser with central wavelength of 1532.25 nm, repetition rate of 2.833 MHz and pulse duration of 34.3 ns. The Pt-SA produce modulation depth of 21.9% and saturation intensity of 21.6 MW cm-2