Buffer-Based Distributed LT Codes

We focus on the design of distributed Luby transform (DLT) codes for erasure networks with multiple sources and multiple relays, communicating to a single destination. The erasure-floor performance of DLT codes improves with the maximum degree of the relay-degree distribution. However, for conventional DLT codes, the maximum degree is upper-bounded by the number of sources. An additional constraint is that the sources are required to have the same information block length. We introduce a $D$-bit buffer for each source-relay link, which allows the relay to select multiple encoded bits from the same source for the relay-encoding process; thus, the number of sources no longer limits the maximum degree at the relay. Furthermore, the introduction of buffers facilitates the use of different information block sizes across sources. Based on density evolution we develop an asymptotic analytical framework for optimization of the relay-degree distribution. We further integrate techniques for unequal erasure protection into the optimization framework. The proposed codes are considered for both lossless and lossy source-relay links. Numerical examples show that there is no loss in erasure performance for transmission over lossy source-relay links as compared to lossless links. Additional delays, however, may occur. The design framework and our contributions are demonstrated by a number of illustrative examples, showing the improvements obtained by the proposed buffer-based DLT codes.Comment: 14 pages, 17 figures, submitte

Enabling Efficient, Robust, and Scalable Wireless Multi-Hop Networks: A Cross-Layer Approach Exploiting Cooperative Diversity

The practical performance in terms of throughput, robustness, and scalability of traditional Wireless Multihop Networks (WMNs) is limited. The key problem is that such networks do not allow for advanced physical layers, which typically require (a) spatial diversity via multiple antennas, (b) timely Channel State Information (CSI) feedback, and (c) a central instance that coordinates nodes. We propose Corridor-based Routing to address these issues. Our approach widens traditional hop-by-hop paths to span multiple nodes at each hop, and thus provide spatial diversity. As a result, at each hop, a group of transmitters cooperates at the physical layer to forward data to a group of receivers. We call two subsequent groups of nodes a stage. Since all nodes participating in data forwarding at a certain hop are part of the same fully connected stage, corridors only require one-hop CSI feedback. Further, each stage operates independently. Thus, Corridor-based Routing does not require a network-wide central instance, and is scalable. We design a protocol that builds end-to-end corridors. As expected, this incurs more overhead than finding a traditional WMN path. However, if the resulting corridor provides throughput gains, the overhead compensates after a certain number of transmitted packets. We adapt two physical layers to the aforementioned stage topology, namely, Orthogonal Frequency-Division Multiple Access (OFDMA), and Interference Alignment (IA). In OFDMA, we allocate each subchannel to a link of the current stage which provides good channel conditions. As a result, we avoid deep fades, which enables OFDMA to transmit data robustly in scenarios in which traditional schemes cannot operate. Moreover, it achieves higher throughputs than such schemes. To minimize the transmission time at each stage, we present an allocation mechanism that takes into account both the CSI, and the amount of data that each transmitter needs to transmit. Further, we address practical issues and implement our scheme on software-defined radios. We achieve roughly 30% average throughput gain compared to a WMN not using corridors. We analyze OFDMA in theory, simulation, and practice. Our results match in all three domains. Further, we design a physical layer for corridor stages based on IA in the frequency domain. Our practical experiments show that IA often performs poorly because the decoding process augments noise. We find that the augmentation factor depends only on the channel coefficients of the subchannels that IA uses. We design a mechanism to determine which transmitters should transmit to which receivers on which subchannels to minimize noise. Since the number of possible combinations is very large, we use heuristics that reduce the search space significantly. Based on this design, we present the first practical frequency IA system. Our results show that our approach avoids noise augmentation efficiently, and thus operates robustly. We observe that IA is most suitable for stages with specific CSI and traffic conditions. In such scenarios, the throughput gain compared to a WMN not using corridors is 25% on average, and 150% in the best case. Finally, we design a decision engine which estimates the performance of both OFDMA and IA for a given stage, and chooses the one which achieves the highest throughput. We evaluate corridors with up to five stages, and achieve roughly 20% average throughput gain. We conclude that switching among physical layers to adapt to the particular CSI and traffic conditions of each stage is crucial for efficient and robust operation

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Application of network coding in satellite broadcast and multiple access channels

Satellite broadcasting and relaying capabilities enable mobile broadcast systems over wide geographical areas, which opens large market possibilities for handheld, vehicular and fixed user terminals. The geostationary (GEO) satellite orbit is highly suited for such applications, as it spares the need for satellite terminals to track the movement of the spacecraft, with important savings in terms of complexity and cost. The large radius of the GEO orbit (more than 40000 km) has two main drawbacks. One is the large free space loss experienced by a signal traveling to or from the satellite, which limits the signal-to-noise ratio (SNR) margins in the link budget with respect to terrestrial systems. The second drawback of the GEO orbit is the large propagation delay (about 250 msec) that limits the use of feedback in both the forward (satellite to satellite terminal) and the reverse (satellite terminal to satellite) link. The limited margin protection causes loss of service availability in environments where there is no direct line of sight to the satellite, such as urban areas. The large propagation delay on its turn, together with the large terminal population size usually served by a GEO satellite, limit the use of feedback, which is at the basis of error-control. In the reverse link, especially in the case of fixed terminals, packet losses are mainly due to collisions, that severely limit the access to satellite services in case a random access scheme is adopted. The need for improvements and further understanding of these setups lead to the development of our work. In this dissertation we study the application of network coding to counteract the above mentioned channel impairments in satellite systems. The idea of using network coding stems from the fact that it allows to efficiently exploit the diversity, either temporal or spatial, present in the system. In the following we outline the original contributions included in each of the chapters of the dissertation. Chapter 3. This chapter deals with channel impairments in the forward link, and specifically with the problem of missing coverage in Urban environments for land mobile satellite (LMS) networks. By applying the Max-flow Min-cut theorem we derive a lower bound on the maximum coverage that can be achieved through cooperation. Inspired by this result, we propose a practical scheme, keeping in mind the compatibility with the DVB-SH standard. We developed a simulator in Matlab/C++ based on the physical layer abstraction and used it to test the performance gain of our scheme with a benchmark relaying scheme that does allow coding at packet level. Chapter 4. The second chapter of contributions is devoted to the information theoretical study of real-time streaming transmissions over fading channels with channel state information at the transmitter only. We introduce this new channel model and propose several transmission schemes, one of which is proved to be asymptotically optimal in terms of throughput. We also provide an upper bound on the achievable throughput for the proposed channel model and compare it numerically with the proposed schemes over a Rayleigh fading channel. Chapter 5. Chapter 5 is devoted to the study of throughput and delay in non-real-time streaming transmission over block fading channels. We derive bounds on the throughput and the delay for this channel and propose different coding techniques based on time-sharing. For each of them we carry out an analytical study of the performance. Finally, we compare numerically the performance of the proposed schemes over a Rayleigh fading channel. Chapter 6. In the last technical chapter we propose a collision resolution method for the return link based on physical layer network coding over extended Galois field (EGF). The proposed scheme extracts information from the colliding signals and achieves important gains with respect to Slotted ALOHA systems as well as with respect to other collision resolution schemes.Una de les característiques mes importants de les plataformes de comunicacions per satèl.lit és la seva capacitat de retransmetre senyals rebuts a un gran número de terminals. Això es fonamental en contextes com la difusió a terminals mòbils o la comunicació entre màquines. Al mateix temps, la disponibilitat d’un canal de retorn permet la creació de sistemes de comunicacions per satèl.lit interactius que, en principi, poden arribar a qualsevol punt del planeta. Els satèl.lits Geoestacionaris son particularment adequats per a complir amb aquesta tasca. Aquest tipus de satèl.lits manté una posició fixa respecte a la Terra, estalviant als terminals terrestres la necessitat de seguir el seu moviment en el cel. Per altra banda, la gran distància que separa la Terra dels satèl.lits Geoestacionaris introdueix grans retrassos en les comunicacions que, afegit al gran número de terminals en servei, limita l’ús de tècniques de retransmissió basades en acknowledgments en cas de pèrdua de paquets. Per tal de sol.lucionar el problema de la pèrdua de paquets, les tècniques més utilitzades son el desplegament de repetidors terrestres, anomenats gap fillers, l’ús de codis de protecció a nivell de paquet i mecanismes proactius de resolució de col.lisions en el canal de retorn. En aquesta tesi s’analitzen i s’estudien sol.lucions a problemes en la comunicació per satèl.lit tant en el canal de baixada com el de pujada. En concret, es consideren tres escenaris diferents. El primer escenari es la transmissió a grans poblacions de terminals mòbils en enorns urbans, que es veuen particularment afectats per la pèrdua de paquets degut a l’obstrucció, per part dels edificis, de la línia de visió amb el satèl.lit. La sol.lució que considerem consisteix en la utilització de la cooperació entre terminals. Una vegada obtinguda una mesura del guany que es pot assolir mitjançant cooperació en un model bàsic de xarxa, a través del teorema Max-flow Min-cut, proposem un esquema de cooperació compatible amb estàndards de comunicació existents. El segon escenari que considerem es la transmissió de vídeo, un tipus de tràfic particularment sensible a la pèrdua de paquets i retards endògens als sistemes de comunicació per satèl.lit. Considerem els casos de transmissió en temps real i en diferit, des de la perspectiva de teoria de la informació, i estudiem diferents tècniques de codificació analítica i numèrica. Un dels resultats principals obtinguts es l’extensió del límit assolible de la capacitat ergòdica del canal en cas que el transmissor rebi les dades de manera gradual, enlloc de rebre-les totes a l’inici de la transmissió. El tercer escenari que considerem es l’accés aleatori al satèl.lit. Desenvolupem un esquema de recuperació dels paquets perduts basat en la codificació de xarxa a nivell físic i en extensions a camps de Galois, amb resultats molt prometedors en termes de rendiment. També estudiem aspectes relacionats amb la implementació pràctica d’aquest esquema

D6.6 Final report on the METIS 5G system concept and technology roadmap

This deliverable presents the METIS 5G system concept which was developed to fulfil the requirements of the beyond-2020 connected information society and to extend today’s wireless communication systems to include new usage scenarios. The METIS 5G system concept consists of three generic 5G services and four main enablers. The three generic 5G services are Extreme Mobile BroadBand (xMBB), Massive Machine- Type Communications (mMTC), and Ultra-reliable Machine-Type Communication (uMTC). The four main enablers are Lean System Control Plane (LSCP), Dynamic RAN, Localized Contents and Traffic Flows, and Spectrum Toolbox. An overview of the METIS 5G architecture is given, as well as spectrum requirements and considerations. System-level evaluation of the METIS 5G system concept has been conducted, and we conclude that the METIS technical objectives are met. A technology roadmap outlining further 5G development, including a timeline and recommended future work is given.Popovski, P.; Mange, G.; Gozalvez -Serrano, D.; Rosowski, T.; Zimmermann, G.; Agyapong, P.; Fallgren, M.... (2014). D6.6 Final report on the METIS 5G system concept and technology roadmap. http://hdl.handle.net/10251/7676

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative diversity techniques for high-throughput wireless relay networks

Relay communications has attracted a growing interest in wireless communications with application to various enhanced technologies. This thesis considers a number of issues related to data throughput in various wireless relay network models. Particularly, new implementations of network coding (NC) and space-time coding (STC) techniques are investigated to offer various means of achieving high-throughput relay communications. Firstly, this thesis investigates different practical automatic repeat request (ARQ) retransmission protocols based on NC for two-way wireless relay networks to improve throughput efficiency. Two improved NC-based ARQ schemes are designed based on go-back-N and selective-repeat (SR) protocols. Addressing ARQ issues in multisource multidestination relay networks, a new NC-based ARQ protocol is proposed and two packet-combination algorithms are developed for retransmissions at relay and sources to significantly improve the throughput. In relation to the concept of channel quality indicator (CQI) reporting in two-way relay networks, two new efficient CQI reporting schemes are designed based on NC to improve the system throughput by allowing two terminals to simultaneously estimate the CQI of the distant terminal-relay link without incurring additional overhead. The transmission time for CQI feedback at the relays is reduced by half while the increase in complexity and the loss of performance are shown to be negligible. Furthermore, a low-complexity relay selection scheme is suggested to reduce the relay searching complexity. For the acknowledgment (ACK) process, this thesis proposes a new block ACK scheme based on NC to significantly reduce the ACK overheads and therefore produce an enhanced throughput. The proposed scheme is also shown to improve the reliability of block ACK transmission and reduce the number of data retransmissions for a higher system throughput. Additionally, this thesis presents a new cooperative retransmission scheme based on relay cooperation and NC to considerably reduce the number of retransmission packets and im- prove the reliability of retransmissions for a more power efficient and higher throughput system with non-overlapped retransmissions. Moreover, two relay selection schemes are recommended to determine the optimised number of relays for the retransmission. Finally, with respect to cognitive wireless relay networks (CWRNs), this thesis proposes a new cooperative spectrum sensing (CSS) scheme to improve the spectrum sensing performance and design a new CSS scheme based on NC for three-hop CWRNs to improve system throughput. Furthermore, a new distributed space-time-frequency block code (DSTFBC) is designed for a two- hop nonregenerative CWRN over frequency-selective fading channels. The proposed DSTFBC design achieves higher data rate, spatial diversity gain, and decoupling detection of data blocks at all destination nodes with a low-complexity receiver structure