448 research outputs found
A Stability Analysis for the Acceleration-based Robust Position Control of Robot Manipulators via Disturbance Observer
This paper proposes a new nonlinear stability analysis for the
acceleration-based robust position control of robot manipulators by using
Disturbance Observer (DOb). It is shown that if the nominal inertia matrix is
properly tuned in the design of DOb, then the position error asymptotically
goes to zero in regulation control and is uniformly ultimately bounded in
trajectory tracking control. As the bandwidth of DOb and the nominal inertia
matrix are increased, the bound of error shrinks, i.e., the robust stability
and performance of the position control system are improved. However, neither
the bandwidth of DOb nor the nominal inertia matrix can be freely increased due
to practical design constraints, e.g., the robust position controller becomes
more noise sensitive when they are increased. The proposed stability analysis
provides insights regarding the dynamic behavior of DOb-based robust motion
control systems. It is theoretically and experimentally proved that
non-diagonal elements of the nominal inertia matrix are useful to improve the
stability and adjust the trade-off between the robustness and noise
sensitivity. The validity of the proposal is verified by simulation and
experimental results.Comment: 9 pages, 9 figures, Journa
Disturbance Observer-based Robust Control and Its Applications: 35th Anniversary Overview
Disturbance Observer has been one of the most widely used robust control
tools since it was proposed in 1983. This paper introduces the origins of
Disturbance Observer and presents a survey of the major results on Disturbance
Observer-based robust control in the last thirty-five years. Furthermore, it
explains the analysis and synthesis techniques of Disturbance Observer-based
robust control for linear and nonlinear systems by using a unified framework.
In the last section, this paper presents concluding remarks on Disturbance
Observer-based robust control and its engineering applications.Comment: 12 pages, 4 figure
Robust Cooperative Manipulation without Force/Torque Measurements: Control Design and Experiments
This paper presents two novel control methodologies for the cooperative
manipulation of an object by N robotic agents. Firstly, we design an adaptive
control protocol which employs quaternion feedback for the object orientation
to avoid potential representation singularities. Secondly, we propose a control
protocol that guarantees predefined transient and steady-state performance for
the object trajectory. Both methodologies are decentralized, since the agents
calculate their own signals without communicating with each other, as well as
robust to external disturbances and model uncertainties. Moreover, we consider
that the grasping points are rigid, and avoid the need for force/torque
measurements. Load distribution is also included via a grasp matrix
pseudo-inverse to account for potential differences in the agents' power
capabilities. Finally, simulation and experimental results with two robotic
arms verify the theoretical findings
Disturbance observer-based neural network control of cooperative multiple manipulators with input saturation
In this paper, the complex problems of internal forces and position control are studied simultaneously and a disturbance observer-based radial basis function neural network (RBFNN) control scheme is proposed to: 1) estimate the unknown parameters accurately; 2) approximate the disturbance experienced by the system due to input saturation; and 3) simultaneously improve the robustness of the system. More specifically, the proposed scheme utilizes disturbance observers, neural network (NN) collaborative control with an adaptive law, and full state feedback. Utilizing Lyapunov stability principles, it is shown that semiglobally uniformly bounded stability is guaranteed for all controlled signals of the closed-loop system. The effectiveness of the proposed controller as predicted by the theoretical analysis is verified by comparative experimental studies
Control strategies for robotic manipulators
This survey is aimed at presenting the major robust control strategies for rigid robot manipulators. The techniques discussed are feedback linearization/Computed torque control, Variable structure compensator, Passivity based approach and Disturbance observer based control. The first one is based on complete dynamic model of a robot. It results in simple linear control which offers guaranteed stability. Variable structure compensator uses a switching/relay action to overcome dynamic uncertainties and disturbances. Passivity based controller make use of passive structure of a robot. If passivity of a feedback system is proved, nonlinearities and uncertainties will not affect the stability. Disturbance observer based controllers estimate disturbances, which can be cancelled out to achieve a nominal model, for which a simple controller can then be designed. This paper, after explaining each control strategy in detail, finally compares these strategies for their pros and cons. Possible solutions to cope with the drawbacks have also been presented in tabular form. © 2012 IEEE
Decentralized adaptive partitioned approximation control of high degrees-of-freedom robotic manipulators considering three actuator control modes
International audiencePartitioned approximation control is avoided in most decentralized control algorithms; however, it is essential to design a feedforward control term for improving the tracking accuracy of the desired references. In addition, consideration of actuator dynamics is important for a robot with high-velocity movement and highly varying loads. As a result, this work is focused on decentralized adaptive partitioned approximation control for complex robotic systems using the orthogonal basis functions as strong approximators. In essence, the partitioned approximation technique is intrinsically decentralized with some modifications. Three actuator control modes are considered in this study: (i) a torque control mode in which the armature current is well controlled by a current servo amplifier and the motor torque/current constant is known, (ii) a current control mode in which the torque/current constant is unknown, and (iii) a voltage control mode with no current servo control being available. The proposed decentralized control law consists of three terms: the partitioned approximation-based feedforward term that is necessary for precise tracking, the high gain-based feedback term, and the adaptive sliding gain-based term for compensation of modeling error. The passivity property is essential to prove the stability of local stability of the individual subsystem with guaranteed global stability. Two case studies are used to prove the validity of the proposed controller: a two-link manipulator and a six-link biped robot
Force Estimation for Teleoperating Industrial Robots
As the energy on the particle accelerators or heavy ion accelerators such as CERN or GSI, fusion reactors such as JET or ITER, or other scientific experiments is increased, it is becoming increasingly necessary to use remote handling techniques in order to interact with the remote and radioactive environment
Comprehensive review on controller for leader-follower robotic system
985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies
- …