202 research outputs found

    Entwicklung einer computergestützten Methode zum reaktionsbasierten De-Novo-Design wirkstoffartiger Verbindungen

    Get PDF
    A new method for computer-based de novo design of drug candidate structures is proposed. DOGS (Design of Genuine Structures) features a ligand-based strategy to suggest new molecular structures. The quality of designed compounds is assessed by a graph kernel method measuring the distance of designed molecules to a known reference ligand. Two graph representations of molecules (molecular graph and reduced graph) are implemented to feature different levels of abstraction from the molecular structure. A fully deterministic construction procedure explicitly designed to facilitate synthesizability of proposed structures is realized: DOGS uses readily available synthesis building blocks and established reaction schemes to assemble new molecules. This approach enables the software to propose not only the final compounds, but also to give suggestions for synthesis routes to generate them at the bench. The set of synthesis schemes comprises about 83 chemical reactions. Special focus was put on ring closure reactions forming drug-like substructures. The library of building blocks consists of about 25,000 readily available synthesis building blocks. DOGS builds up new structures in a stepwise process. Each virtual synthesis step adds a fragment to the growing molecule until a stop criterion (upper threshold for molecular mass or number of synthesis steps) is fulfilled. In a theoretical evaluation, a set of ~1,800 molecules proposed by DOGS is analyzed for critical properties of de novo designed compounds. The software is able to suggest drug-like molecules (79% violate less than two of Lipinski’s ‘rule of five’). In addition, a trained classifier for drug-likeness assigns a score >0.8 to 51% of the designed molecules (with 1.0 being the top score). In addition, most of the DOGS molecules are deemed to be synthesizable by a retro-synthesis descriptor (77% of molecules score in the top 10% of the decriptor’s value range). Calculated logP(o/w) values of constructed molecules resemble a unimodal distribution centred close to the mean of logP(o/w) values calculated for the reference compounds. A structural analysis of selected designs reveals that DOGS is capable of constructing molecules reflecting the overall topological arrangement of pharmacophoric features found in the reference ligands. At the same time, the DOGS designs represent innovative compounds being structurally distinct from the references. Synthesis routes for these examples are short and seem feasible in most cases. Some reaction steps might need modification by using protecting groups to avoid unwanted side reactions. Plausible bioisosters for known privileged fragments addressing the S1 pocket of trypsin were proposed by DOGS in a case study. Three of them can be found in known trypsin inhibitors as S1-adressing side chains. The software was also tested in two prospective case studies to design bioactive compounds. DOGS was applied to design ligands for human gamma-secretase and human histamine receptor subtype 4 (hH4R). Two selected designs for gamma-secretase were readily synthesizable as suggested by the software in one-step reactions. Both compounds represent inverse modulators of the target molecule. In a second case study, a ligand candidate selected for hH4R was synthesized exactly following the three-step synthesis plan suggested by DOGS. This compound showed low activity on the target structure. The concept of DOGS is able to deliver synthesizable and bioactive compounds. Suggested synthesis plans of selected compounds were readily pursuable. DOGS can therefore serve as a valuable idea generator for the design of new pharmacological active compounds.Im Rahmen der vorliegenden Arbeit wird eine neue Methode zum computergestützten de novo Design von wirkstoffartigen Molekülen vorgestellt. Ziel ist es, automatisiert und zielgerichtet neuartige Moleküle mit biologischer Aktivität zu entwerfen. Das entwickelte Programm DOGS (Design of Genuine Structures) schlägt zusätzlich zu den chemischen Verbindungen mögliche Strategien zu deren Synthese vor. Ein vollständig deterministischer Konstruktionsalgorithmus verwendet verfügbare Synthesebausteine und etablierte chemische Reaktionen zum Aufbau der neuen Moleküle. Die Bibliothek der Synthesebausteine umfasst etwa 25.000 Moleküle mit einer molekularen Masse zwischen 30 und 300 Da. Die Sammlung der Reaktionen zur Verknüpfung der Bausteine besteht aus 83 literaturbeschriebenen chemischen Reaktionen. Ein Großteil stellt Syntheseschritte zur Generierung neuer Ringsysteme dar. DOGS baut neue Moleküle schrittweise auf: In jedem virtuellen Syntheseschritt wird ein neues Fragment an das wachsende Molekül angefügt, bis eines der Stoppkriterien (Überschreitung einer maximalen molekulare Masse oder Anzahl Syntheseschritte) erfüllt ist. Zur Bewertung der Qualität der Zischen- und Endprodukte wird eine ligandenbasierte Strategie verwendet. Die entstehenden Moleküle werden mit einem bekannten Referenzliganden verglichen, welcher die gewünschte biologische Aktivität aufweist. Das Verfahren zielt dabei auf die Maximierung der Ähnlichkeit der neu konstruierten Moleküle zur Referenz ab. Eine Graphkernmethode berechnet die Ähnlichkeit zum Referenzliganden anhand des Vergleichs ihrer zweidimensionalen molekularen Struktur. In einer theoretischen Auswertung des Programms werden ca. 1.800 generierte potentielle Trypsin-Inhibitoren hinsichtlich solcher Eigenschaften analysiert, welche für neu entworfene Verbindungen kritisch sind: DOGS ist in der Lage wirkstoffartige Moleküle zu entwerfen (79% verletzen weniger als zwei von Lipinskis 'rule of five' Kriterien zur Abschätzung der oralen Bioverfügbarkeit). Zusätzlich wurde die Wirkstoffartigkeit der DOGS-Moleküle durch einen trainierten Klassifizieralgorithmus bewertet. Hierbei erhielten 51% der Verbindungen einen Wert in den oberen 20% des Wertebereichs des Klassifizierers. Weiterhin wird die synthetische Zugänglichkeit für den Großteil der computergenerierten Moleküle als hoch eingeschätzt (77% erhalten einen Wert in den oberen 10% des Wertebereichs eines Deskriptors zur Abschätzung der Synthetisierbarkeit). Die berechneten logP(o/w) Werte der konstruierten Moleküle entsprechen in ihrer Verteilung denen der Referenzliganden. Die Untersuchung der vorgeschlagenen Trypsin-Inhibitoren auf Bioisostere zur Adressierung der S1-Bindetasche zeigt, dass hierfür plausible Vorschläge von DOGS generiert werden. Der Großteil ist potentiell in der Lage eine kritische ladungsvermittelte Interaktion mit dem Protein in der S1-Bindetasche einzugehen. Unter den Vorschlägen befinden sich unter anderem auch drei Seitenketten, für die Interaktionen mit der S1-Bindetasche von Trypsin experimentell bestätigt sind. Eine Analyse ausgewählter Beispiele aus verschiedenen Läufen zum Ligandenentwurf für unterschiedliche biologische Zielmoleküle zeigt, dass das Programm in der Lage ist, die generelle topologische Anordnung potentieller Interaktionspunkte der Referenzliganden in den neu erzeugten Molekülen beizubehalten. Gleichzeitig sind diese Moleküle strukturell verschieden im Vergleich zu den Referenzliganden. Die generierten Synthesewege sind kurz und erscheinen in den meisten Fällen plausibel. Für einige der Syntheseschritte wird bei der praktischen Umsetzung der ergänzende Einsatz von Schutzgruppen notwendig sein, um unerwünschte Nebenreaktionen zu vermeiden. Die Software wurde zusätzlich zu den theoretischen Analysen in prospektiven Studien zum Ligandenentwurf praktisch evaluiert. Hierzu wurde DOGS zur Generierung von Liganden des humanen Histaminrezeptors 4 (hH4R) sowie der humanen gamma-Sekretase eingesetzt. Für hH4R wurde einer der entworfenen potentiellen Liganden synthetisiert, wobei der vorgeschlagene Syntheseweg exakt nachvollzogen werden konnte. Der Ligand weist eine geringfügige Affinität zum Histaminrezeptor auf. Für die gamma-Sekretase wurden zwei der entworfenen Moleküle zur Synthese und Testung ausgewählt. In beiden Fällen konnte auch hier die von DOGS vorgeschlagene Synthesestrategie nachvollzogen werden. Anschließende in vitro Analysen wiesen beide Verbindungen als inverse Modulatoren der gamma-Sekretase aus. Das Konstruktionskonzept von DOGS ist in der Lage, bioaktive Substanzen vorzuschlagen. Diese sind synthetisch zugänglich und können nach der vorgeschlagenen Strategie synthetisiert werden. Somit kann das Programm als Ideengenerator für den Entwurf neuer bioaktiver Moleküle dienen

    11th German Conference on Chemoinformatics (GCC 2015) : Fulda, Germany. 8-10 November 2015.

    Get PDF

    In silico Methods for Design of Kinase Inhibitors as Anticancer Drugs

    Get PDF
    Rational drug design implies usage of molecular modeling techniques such as pharmacophore modeling, molecular dynamics, virtual screening, and molecular docking to explain the activity of biomolecules, define molecular determinants for interaction with the drug target, and design more efficient drug candidates. Kinases play an essential role in cell function and therefore are extensively studied targets in drug design and discovery. Kinase inhibitors are clinically very important and widely used antineoplastic drugs. In this review, computational methods used in rational drug design of kinase inhibitors are discussed and compared, considering some representative case studies

    Similarity Methods in Chemoinformatics

    Get PDF
    promoting access to White Rose research paper

    Evolutionary Computation and QSAR Research

    Get PDF
    [Abstract] The successful high throughput screening of molecule libraries for a specific biological property is one of the main improvements in drug discovery. The virtual molecular filtering and screening relies greatly on quantitative structure-activity relationship (QSAR) analysis, a mathematical model that correlates the activity of a molecule with molecular descriptors. QSAR models have the potential to reduce the costly failure of drug candidates in advanced (clinical) stages by filtering combinatorial libraries, eliminating candidates with a predicted toxic effect and poor pharmacokinetic profiles, and reducing the number of experiments. To obtain a predictive and reliable QSAR model, scientists use methods from various fields such as molecular modeling, pattern recognition, machine learning or artificial intelligence. QSAR modeling relies on three main steps: molecular structure codification into molecular descriptors, selection of relevant variables in the context of the analyzed activity, and search of the optimal mathematical model that correlates the molecular descriptors with a specific activity. Since a variety of techniques from statistics and artificial intelligence can aid variable selection and model building steps, this review focuses on the evolutionary computation methods supporting these tasks. Thus, this review explains the basic of the genetic algorithms and genetic programming as evolutionary computation approaches, the selection methods for high-dimensional data in QSAR, the methods to build QSAR models, the current evolutionary feature selection methods and applications in QSAR and the future trend on the joint or multi-task feature selection methods.Instituto de Salud Carlos III, PIO52048Instituto de Salud Carlos III, RD07/0067/0005Ministerio de Industria, Comercio y Turismo; TSI-020110-2009-53)Galicia. Consellería de Economía e Industria; 10SIN105004P

    Lead optimization for new antimalarials and Successful lead identification for metalloproteinases: A Fragment-based approach Using Virtual Screening

    Get PDF
    Lead optimization for new antimalarials and Successful lead identification for metalloproteinases: A Fragment-based approach Using Virtual Screening Computer-aided drug design is an essential part of the modern medicinal chemistry, and has led to the acceleration of many projects. The herein described thesis presents examples for its application in the field of lead optimization and lead identification for three metalloproteins. DOXP-reductoisomerase (DXR) is a key enzyme of the mevalonate independent isoprenoid biosynthesis. Structure-activity relationships for 43 DXR inhibitors are established, derived from protein-based docking, ligand-based 3D QSAR and a combination of both approaches as realized by AFMoC. As part of an effort to optimize the properties of the established inhibitor Fosmidomycin, analogues have been synthesized and tested to gain further insights into the primary determinants of structural affinity. Unfortunately, these structures still leave the active Fosmidomycin conformation and detailed reaction mechanism undetermined. This fact, together with the small inhibitor data set provides a major challenge for presently available docking programs and 3D QSAR tools. Using the recently developed protein tailored scoring protocol AFMoC precise prediction of binding affinities for related ligands as well as the capability to estimate the affinities of structurally distinct inhibitors has been achieved. Farnesyltransferase is a zinc-metallo enzyme that catalyzes the posttranslational modification of numerous proteins involved in intracellular signal transduction. The development of farnesyltransferase inhibitors is directed towards the so-called non-thiol inhibitors because of adverse drug effects connected to free thiols. A first step on the way to non-thiol farnesyltransferase inhibitors was the development of an CAAX-benzophenone peptidomimetic based on a pharmacophore model. On its basis bisubstrate analogues were developed as one class of non-thiol farnesyltransferase inhibitors. In further studies two aryl binding and two distinct specificity sites were postulated. Flexible docking of model compounds was applied to investigate the sub-pockets and design highly active non-thiol farnesyltransferase inhibitor. In addition to affinity, special attention was paid towards in vivo activity and species specificity. The second part of this thesis describes a possible strategy for computer-aided lead discovery. Assembling a complex ligand from simple fragments has recently been introduced as an alternative to traditional HTS. While frequently applied experimentally, only a few examples are known for computational fragment-based approaches. Mostly, computational tools are applied to compile the libraries and to finally assess the assembled ligands. Using the metalloproteinase thermolysin (TLN) as a model target, a computational fragment-based screening protocol has been established. Starting with a data set of commercially available chemical compounds, a fragment library has been compiled considering (1) fragment likeness and (2) similarity to known drugs. The library is screened for target specificity, resulting in 112 fragments to target the zinc binding area and 75 fragments targeting the hydrophobic specificity pocket of the enzyme. After analyzing the performance of multiple docking programs and scoring functions forand the most 14 candidates are selected for further analysis. Soaking experiments were performed for reference fragment to derive a general applicable crystallization protocol for TLN and subsequently for new protein-fragment complex structures. 3-Methylsaspirin could be determined to bind to TLN. Additional studies addressed a retrospective performance analysis of the applied scoring functions and modification on the screening hit. Curios about the differences of aspirin and 3-methylaspirin, 3-chloroaspirin has been synthesized and affinities could be determined to be 2.42 mM; 1.73 mM und 522 μM respectively. The results of the thesis show, that computer aided drug design approaches could successfully support projects in lead optimization and lead identification. fragments in general, the fragments derived from the screening are docke

    Structure- and Ligand-Based Design of Novel Antimicrobial Agents

    Get PDF
    The use of computer based techniques in the design of novel therapeutic agents is a rapidly emerging field. Although the drug-design techniques utilized by Computational Medicinal Chemists vary greatly, they can roughly be classified into structure-based and ligand-based approaches. Structure-based methods utilize a solved structure of the design target, protein or DNA, usually obtained by X-ray or NMR methods to design or improve compounds with activity against the target. Ligand-based methods use active compounds with known affinity for a target that may yet be unresolved. These methods include Pharmacophore-based searching for novel active compounds or Quantitative Structure-Activity Relationship (QSAR) studies. The research presented here utilized both structure and ligand-based methods against two bacterial targets: Bacillus anthracis and Mycobacterium tuberculosis. The first part of this thesis details our efforts to design novel inhibitors of the enzyme dihydropteroate synthase from B. anthracis using crystal structures with known inhibitors bound. The second part describes a QSAR study that was performed using a series of novel nitrofuranyl compounds with known, whole-cell, inhibitory activity against M. tuberculosis. Dihydropteroate synthase (DHPS) catalyzes the addition of p-amino benzoic acid (pABA) to dihydropterin pyrophosphate (DHPP) to form pteroic acid as a key step in bacterial folate biosynthesis. It is the traditional target of the sulfonamide class of antibiotics. Unfortunately, bacterial resistance and adverse effects have limited the clinical utility of the sulfonamide antibiotics. Although six bacterial crystal structures are available, the flexible loop regions that enclose pABA during binding and contain key sulfonamide resistance sites have yet to be visualized in their functional conformation. To gain a new understanding of the structural basis of sulfonamide resistance, the molecular mechanism of DHPS action, and to generate a screening structure for high-throughput virtual screening, molecular dynamics simulations were applied to model the conformations of the unresolved loops in the active site. Several series of molecular dynamics simulations were designed and performed utilizing enzyme substrates and inhibitors, a transition state analog, and a pterin-sulfamethoxazole adduct. The positions of key mutation sites conserved across several bacterial species were closely monitored during these analyses. These residues were shown to interact closely with the sulfonamide binding site. The simulations helped us gain new understanding of the positions of the flexible loops during inhibitor binding that has allowed the development of a DHPS structural model that could be used for high-through put virtual screening (HTVS). Additionally, insights gained on the location and possible function of key mutation sites on the flexible loops will facilitate the design of new, potent inhibitors of DHPS that can bypass resistance mutations that render sulfonamides inactive. Prior to performing high-throughput virtual screening, the docking and scoring functions to be used were validated using established techniques against the B. anthracis DHPS target. In this validation study, five commonly used docking programs, FlexX, Surflex, Glide, GOLD, and DOCK, as well as nine scoring functions, were evaluated for their utility in virtual screening against the novel pterin binding site. Their performance in ligand docking and virtual screening against this target was examined by their ability to reproduce a known inhibitor conformation and to correctly detect known active compounds seeded into three separate decoy sets. Enrichment was demonstrated by calculated enrichment factors at 1% and Receiver Operating Characteristic (ROC) curves. The effectiveness of post-docking relaxation prior to rescoring and consensus scoring were also evaluated. Of the docking and scoring functions evaluated, Surflex with SurflexScore and Glide with GlideScore performed best overall for virtual screening against the DHPS target. The next phase of the DHPS structure-based drug design project involved high-throughput virtual screening against the DHPS structural model previously developed and docking methodology validated against this target. Two general virtual screening methods were employed. First, large, virtual libraries were pre-filtered by 3D pharmacophore and modified Rule-of-Three fragment constraints. Nearly 5 million compounds from the ZINC databases were screened generating 3,104 unique, fragment-like hits that were subsequently docked and ranked by score. Second, fragment docking without pharmacophore filtering was performed on almost 285,000 fragment-like compounds obtained from databases of commercial vendors. Hits from both virtual screens with high predicted affinity for the pterin binding pocket, as determined by docking score, were selected for in vitro testing. Activity and structure-activity relationship of the active fragment compounds have been developed. Several compounds with micromolar activity were identified and taken to crystallographic trials. Finally, in our ligand-based research into M. tuberculosis active agents, a series of nitrofuranylamide and related aromatic compounds displaying potent activity was investigated utilizing 3-Dimensional Quantitative Structure-Activity Relationship (3D-QSAR) techniques. Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) methods were used to produce 3D-QSAR models that correlated the Minimum Inhibitory Concentration (MIC) values against M. tuberculosis with the molecular structures of the active compounds. A training set of 95 active compounds was used to develop the models, which were then evaluated by a series of internal and external cross-validation techniques. A test set of 15 compounds was used for the external validation. Different alignment and ionization rules were investigated as well as the effect of global molecular descriptors including lipophilicity (cLogP, LogD), Polar Surface Area (PSA), and steric bulk (CMR), on model predictivity. Models with greater than 70% predictive ability, as determined by external validation and high internal validity (cross validated r2 \u3e .5) were developed. Incorporation of lipophilicity descriptors into the models had negligible effects on model predictivity. The models developed will be used to predict the activity of proposed new structures and advance the development of next generation nitrofuranyl and related nitroaromatic anti-tuberculosis agents

    IN SILICO METHODS FOR DRUG DESIGN AND DISCOVERY

    Get PDF
    Computer-aided drug design (CADD) methodologies are playing an ever-increasing role in drug discovery that are critical in the cost-effective identification of promising drug candidates. These computational methods are relevant in limiting the use of animal models in pharmacological research, for aiding the rational design of novel and safe drug candidates, and for repositioning marketed drugs, supporting medicinal chemists and pharmacologists during the drug discovery trajectory.Within this field of research, we launched a Research Topic in Frontiers in Chemistry in March 2019 entitled “In silico Methods for Drug Design and Discovery,” which involved two sections of the journal: Medicinal and Pharmaceutical Chemistry and Theoretical and Computational Chemistry. For the reasons mentioned, this Research Topic attracted the attention of scientists and received a large number of submitted manuscripts. Among them 27 Original Research articles, five Review articles, and two Perspective articles have been published within the Research Topic. The Original Research articles cover most of the topics in CADD, reporting advanced in silico methods in drug discovery, while the Review articles offer a point of view of some computer-driven techniques applied to drug research. Finally, the Perspective articles provide a vision of specific computational approaches with an outlook in the modern era of CADD
    corecore