The Potential for a GPU-Like Overlay Architecture for FPGAs

We propose a soft processor programming model and architecture inspired by graphics processing units (GPUs) that are well-matched to the strengths of FPGAs, namely, highly parallel and pipelinable computation. In particular, our soft processor architecture exploits multithreading, vector operations, and predication to supply a floating-point pipeline of 64 stages via hardware support for up to 256 concurrent thread contexts. The key new contributions of our architecture are mechanisms for managing threads and register files that maximize data-level and instruction-level parallelism while overcoming the challenges of port limitations of FPGA block memories as well as memory and pipeline latency. Through simulation of a system that (i) is programmable via NVIDIA's high-level Cg language, (ii) supports AMD's CTM r5xx GPU ISA, and (iii) is realizable on an XtremeData XD1000 FPGA-based accelerator system, we demonstrate the potential for such a system to achieve 100% utilization of a deeply pipelined floating-point datapath

From Parallel Programs to Customized Parallel Processors

The need for fast time to market of new embedded processor-based designs calls for a rapid design methodology of the included processors. The call for such a methodology is even more emphasized in the context of so called soft cores targeted to reconfigurable fabrics where per-design processor customization is commonplace. The C language has been commonly used as an input to hardware/software co-design flows. However, as C is a sequential language, its potential to generate parallel operations to utilize naturally parallel hardware constructs is far from optimal, leading to a customized processor design space with limited parallel resource scalability. In contrast, when utilizing a parallel programming language as an input, a wider processor design space can be explored to produce customized processors with varying degrees of utilized parallelism. This Thesis proposes a novel Multicore Application-Specific Instruction Set Processor (MCASIP) co-design methodology that exploits parallel programming languages as the application input format. In the methodology, the designer can explicitly capture the parallelism of the algorithm and exploit specialized instructions using a parallel programming language in contrast to being on the mercy of the compiler or the hardware to extract the parallelism from a sequential input. The Thesis proposes a multicore processor template based on the Transport Triggered Architecture, compiler techniques involved in static parallelization of computation kernels with barriers and a datapath integrated hardware accelerator for low overhead software synchronization implementation. These contributions enable scaling the customized processors both at the instruction and task levels to efficiently exploit the parallelism in the input program up to the implementation constraints such as the memory bandwidth or the chip area. The different contributions are validated with case studies, comparisons and design examples

Accuracy-Guaranteed Fixed-Point Optimization in Hardware Synthesis and Processor Customization

RÉSUMÉ De nos jours, le calcul avec des nombres fractionnaires est essentiel dans une vaste gamme d’applications de traitement de signal et d’image. Pour le calcul numérique, un nombre fractionnaire peut être représenté à l’aide de l’arithmétique en virgule fixe ou en virgule flottante. L’arithmétique en virgule fixe est largement considérée préférable à celle en virgule flottante pour les architectures matérielles dédiées en raison de sa plus faible complexité d’implémentation. Dans la mise en œuvre du matériel, la largeur de mot attribuée à différents signaux a un impact significatif sur des métriques telles que les ressources (transistors), la vitesse et la consommation d'énergie. L'optimisation de longueur de mot (WLO) en virgule fixe est un domaine de recherche bien connu qui vise à optimiser les chemins de données par l'ajustement des longueurs de mots attribuées aux signaux. Un nombre en virgule fixe est composé d’une partie entière et d’une partie fractionnaire. Il y a une limite inférieure au nombre de bits alloués à la partie entière, de façon à prévenir les débordements pour chaque signal. Cette limite dépend de la gamme de valeurs que peut prendre le signal. Le nombre de bits de la partie fractionnaire, quant à lui, détermine la taille de l'erreur de précision finie qui est introduite dans les calculs. Il existe un compromis entre la précision et l'efficacité du matériel dans la sélection du nombre de bits de la partie fractionnaire. Le processus d'attribution du nombre de bits de la partie fractionnaire comporte deux procédures importantes: la modélisation de l'erreur de quantification et la sélection de la taille de la partie fractionnaire. Les travaux existants sur la WLO ont porté sur des circuits spécialisés comme plate-forme cible. Dans cette thèse, nous introduisons de nouvelles méthodologies, techniques et algorithmes pour améliorer l’implémentation de calculs en virgule fixe dans des circuits et processeurs spécialisés. La thèse propose une approche améliorée de modélisation d’erreur, basée sur l'arithmétique affine, qui aborde certains problèmes des méthodes existantes et améliore leur précision. La thèse introduit également une technique d'accélération et deux algorithmes semi-analytiques pour la sélection de la largeur de la partie fractionnaire pour la conception de circuits spécialisés. Alors que le premier algorithme suit une stratégie de recherche progressive, le second utilise une méthode de recherche en forme d'arbre pour l'optimisation de la largeur fractionnaire. Les algorithmes offrent deux options de compromis entre la complexité de calcul et le coût résultant. Le premier algorithme a une complexité polynomiale et obtient des résultats comparables avec des approches heuristiques existantes. Le second algorithme a une complexité exponentielle, mais il donne des résultats quasi-optimaux par rapport à une recherche exhaustive. Cette thèse propose également une méthode pour combiner l'optimisation de la longueur des mots dans un contexte de conception de processeurs configurables. La largeur et la profondeur des blocs de registres et l'architecture des unités fonctionnelles sont les principaux objectifs ciblés par cette optimisation. Un nouvel algorithme d'optimisation a été développé pour trouver la meilleure combinaison de longueurs de mots et d'autres paramètres configurables dans la méthode proposée. Les exigences de précision, définies comme l'erreur pire cas, doivent être respectées par toute solution. Pour faciliter l'évaluation et la mise en œuvre des solutions retenues, un nouvel environnement de conception de processeur a également été développé. Cet environnement, qui est appelé PolyCuSP, supporte une large gamme de paramètres, y compris ceux qui sont nécessaires pour évaluer les solutions proposées par l'algorithme d'optimisation. L’environnement PolyCuSP soutient l’exploration rapide de l'espace de solution et la capacité de modéliser différents jeux d'instructions pour permettre des comparaisons efficaces.----------ABSTRACT Fixed-point arithmetic is broadly preferred to floating-point in hardware development due to the reduced hardware complexity of fixed-point circuits. In hardware implementation, the bitwidth allocated to the data elements has significant impact on efficiency metrics for the circuits including area usage, speed and power consumption. Fixed-point word-length optimization (WLO) is a well-known research area. It aims to optimize fixed-point computational circuits through the adjustment of the allocated bitwidths of their internal and output signals. A fixed-point number is composed of an integer part and a fractional part. There is a minimum number of bits for the integer part that guarantees overflow and underflow avoidance in each signal. This value depends on the range of values that the signal may take. The fractional word-length determines the amount of finite-precision error that is introduced in the computations. There is a trade-off between accuracy and hardware cost in fractional word-length selection. The process of allocating the fractional word-length requires two important procedures: finite-precision error modeling and fractional word-length selection. Existing works on WLO have focused on hardwired circuits as the target implementation platform. In this thesis, we introduce new methodologies, techniques and algorithms to improve the hardware realization of fixed-point computations in hardwired circuits and customizable processors. The thesis proposes an enhanced error modeling approach based on affine arithmetic that addresses some shortcomings of the existing methods and improves their accuracy. The thesis also introduces an acceleration technique and two semi-analytical fractional bitwidth selection algorithms for WLO in hardwired circuit design. While the first algorithm follows a progressive search strategy, the second one uses a tree-shaped search method for fractional width optimization. The algorithms offer two different time-complexity/cost efficiency trade-off options. The first algorithm has polynomial complexity and achieves comparable results with existing heuristic approaches. The second algorithm has exponential complexity but achieves near-optimal results compared to an exhaustive search. The thesis further proposes a method to combine word-length optimization with application-specific processor customization. The supported datatype word-length, the size of register-files and the architecture of the functional units are the main target objectives to be optimized. A new optimization algorithm is developed to find the best combination of word-length and other customizable parameters in the proposed method. Accuracy requirements, defined as the worst-case error bound, are the key consideration that must be met by any solution. To facilitate evaluation and implementation of the selected solutions, a new processor design environment was developed. This environment, which is called PolyCuSP, supports necessary customization flexibility to realize and evaluate the solutions given by the optimization algorithm. PolyCuSP supports rapid design space exploration and capability to model different instruction-set architectures to enable effective compari

A proposed synthesis method for Application-Specific Instruction Set Processors

Due to the rapid technology advancement in integrated circuit era, the need for the high computation performance together with increasing complexity and manufacturing costs has raised the demand for high-performance con fi gurable designs; therefore, the Application-Speci fi c Instruction Set Processors (ASIPs) are widely used in SoC design. The automated generation of software tools for ASIPs is a commonly used technique, but the automated hardware model generation is less frequently applied in terms of fi nal RTL implementations. Contrary to this, the fi nal register-transfer level models are usually created, at least partly, manually. This paper presents a novel approach for automated hardware model generation for ASIPs. The new solution is based on a novel abstract ASIP model and a modeling language (Algorithmic Microarchitecture Description Language, AMDL) optimized for this architecture model. The proposed AMDL-based pre-synthesis method is based on a set of pre-de fi ned VHDL implementation schemes, which ensure the qualities of the automatically generated register-transfer level models in terms of resource requirement and operation frequency. The design framework implementing the algorithms required by the synthesis method is also presented

Real-time VLSI architecture for bio-medical monitoring

This paper discusses the architecture and implementation of SSS2, a high-performance real-time signal processing system developed with a hybrid ESL/RTL methodology and targeted to biomedical image processing. Traditional methodologies, as well as new tools, such as Cebatech's C2R untimed-C synthesizer have been employed in the design of the system. The SSS2 platform specifies a parametric number of scalar processing elements, based on multiple 32-bit Sparc-compliant engines, augmented with LE2, an ESL-designed 2-way LIW/SIMD accelerator. LE2, which is purely designed in C, exposes a consistent interface to its SIMD datapath directly which is directly derived from the C-source of open-source image processing codes. It is synthesized to Verilog RTL with C2R. Behaviorally-synthesized SIMD datapaths are then 'plugged-in' into the exposed LE2 datapath interface. The LE2 memory interface can be either a cache- based configurable vector load/store unit or a multi-banked, multi-channel streaming local memory system. Results drawn from this work strongly suggest a shift towards a hybrid approach in designing multi-core systems for high bandwidth streaming and for dealing with large scale medical image transfers and non-linear bio-signal processing algorithms

KAVUAKA: a low-power application-specific processor architecture for digital hearing aids

The power consumption of digital hearing aids is very restricted due to their small physical size and the available hardware resources for signal processing are limited. However, there is a demand for more processing performance to make future hearing aids more useful and smarter. Future hearing aids should be able to detect, localize, and recognize target speakers in complex acoustic environments to further improve the speech intelligibility of the individual hearing aid user. Computationally intensive algorithms are required for this task. To maintain acceptable battery life, the hearing aid processing architecture must be highly optimized for extremely low-power consumption and high processing performance.The integration of application-specific instruction-set processors (ASIPs) into hearing aids enables a wide range of architectural customizations to meet the stringent power consumption and performance requirements. In this thesis, the application-specific hearing aid processor KAVUAKA is presented, which is customized and optimized with state-of-the-art hearing aid algorithms such as speaker localization, noise reduction, beamforming algorithms, and speech recognition. Specialized and application-specific instructions are designed and added to the baseline instruction set architecture (ISA). Among the major contributions are a multiply-accumulate (MAC) unit for real- and complex-valued numbers, architectures for power reduction during register accesses, co-processors and a low-latency audio interface. With the proposed MAC architecture, the KAVUAKA processor requires 16 % less cycles for the computation of a 128-point fast Fourier transform (FFT) compared to related programmable digital signal processors. The power consumption during register file accesses is decreased by 6 %to 17 % with isolation and by-pass techniques. The hardware-induced audio latency is 34 %lower compared to related audio interfaces for frame size of 64 samples.The final hearing aid system-on-chip (SoC) with four KAVUAKA processor cores and ten co-processors is integrated as an application-specific integrated circuit (ASIC) using a 40 nm low-power technology. The die size is 3.6 mm2. Each of the processors and co-processors contains individual customizations and hardware features with a varying datapath width between 24-bit to 64-bit. The core area of the 64-bit processor configuration is 0.134 mm2. The processors are organized in two clusters that share memory, an audio interface, co-processors and serial interfaces. The average power consumption at a clock speed of 10 MHz is 2.4 mW for SoC and 0.6 mW for the 64-bit processor.Case studies with four reference hearing aid algorithms are used to present and evaluate the proposed hardware architectures and optimizations. The program code for each processor and co-processor is generated and optimized with evolutionary algorithms for operation merging,instruction scheduling and register allocation. The KAVUAKA processor architecture is com-pared to related processor architectures in terms of processing performance, average power consumption, and silicon area requirements