High-resolution video characterisation of vulcanian plumes at Sabancaya Volcano, Peru

Since November 2016, volcanic activity at Sabancaya volcano (Peru) has been characterized by multiple short-lived Vulcanian explosions per day. These Vulcanian-type explosions and related volcanic plumes were also recorded in visible light during July and August 2018. Specific objectives of this work are to: i) develop a new algorithm to identify and isolate the plume pixels; ii) extract the main geometrical parameters of the eruptive column, such as the height and width as a function of time; iii) determine quantitative information related to the plume motion (e.g. the rise velocity and air entrainment coefficient), based on the physical quantities obtained through the first-order analysis; iv) characterize the eruption dynamics of Vulcanian plumes at Sabancaya. The results show that the algorithm traces well the plume boundaries and is also capable of automatically calculating the geometrical parameters (height of the top, maximum width and rise velocity of the plume head). We focussed on 8 explosions that are characterized by optimal weather and plume rise conditions. The calculated height for these selected explosions ranges from 180 to 715 m within 30 seconds after ejection, while the exit velocities are up to 96.5 m/s. The air entrainment coefficients were also estimated, and lie around 0.15 ± 0.04. Moreover, we found that plumes at Sabancaya have a transient/thermal behaviour, dominated by an unsteady release of pyroclastic material that strongly controls its features and evolution. Thus, high resolution video analysis, quantitative measurements and numerical modelling are merged here to improve the understanding of volcanic explosions at Sabancaya volcano and of volcanic plumes in general

The Effect of a Diverse Dataset for Transfer Learning in Thermal Person Detection

Thermal cameras are popular in detection for their precision in surveillance in the dark and for privacy preservation. In the era of data driven problem solving approaches, manually finding and annotating a large amount of data is inefficient in terms of cost and effort. With the introduction of transfer learning, rather than having large datasets, a dataset covering all characteristics and aspects of the target place is more important. In this work, we studied a large thermal dataset recorded for 20 weeks and identified nine phenomena in it. Moreover, we investigated the impact of each phenomenon for model adaptation in transfer learning. Each phenomenon was investigated separately and in combination. the performance was analyzed by computing the F1 score, precision, recall, true negative rate, and false negative rate. Furthermore, to underline our investigation, the trained model with our dataset was further tested on publicly available datasets, and encouraging results were obtained. Finally, our dataset was also made publicly available

Comprehensive Survey and Analysis of Techniques, Advancements, and Challenges in Video-Based Traffic Surveillance Systems

The challenges inherent in video surveillance are compounded by a several factors, like dynamic lighting conditions, the coordination of object matching, diverse environmental scenarios, the tracking of heterogeneous objects, and coping with fluctuations in object poses, occlusions, and motion blur. This research endeavor aims to undertake a rigorous and in-depth analysis of deep learning- oriented models utilized for object identification and tracking. Emphasizing the development of effective model design methodologies, this study intends to furnish a exhaustive and in-depth analysis of object tracking and identification models within the specific domain of video surveillance

Hardware dedicado para sistemas empotrados de visión

La constante evolución de las Tecnologías de la Información y las Comunicaciones no solo ha permitido que más de la mitad de la población mundial esté actualmente interconectada a través de Internet, sino que ha sido el caldo de cultivo en el que han surgido nuevos paradigmas, como el ‘Internet de las cosas’ (IoT) o la ‘Inteligencia ambiental’ (AmI), que plantean la necesidad de interconectar objetos con distintas funcionalidades para lograr un entorno digital, sensible y adaptativo, que proporcione servicios de muy distinta índole a sus usuarios. La consecución de este entorno requiere el desarrollo de dispositivos electrónicos de bajo coste que, con tamaño y peso reducido, sean capaces de interactuar con el medio que los rodea, operar con máxima autonomía y proporcionar un elevado nivel de inteligencia. La funcionalidad de muchos de estos dispositivos incluirá la capacidad para adquirir, procesar y transmitir imágenes, extrayendo, interpretando o modificando la información visual que resulte de interés para una determinada aplicación. En el marco de este desafío surge la presente Tesis Doctoral, cuyo eje central es el desarrollo de hardware dedicado para la implementación de algoritmos de procesamiento de imágenes y secuencias de vídeo usados en sistemas empotrados de visión. El trabajo persigue una doble finalidad. Por una parte, la búsqueda de soluciones que, por sus prestaciones y rendimiento, puedan ser incorporadas en sistemas que satisfagan las estrictas exigencias de funcionalidad, tamaño, consumo de energía y velocidad de operación demandadas por las nuevas aplicaciones. Por otra, el diseño de una serie de bloques funcionales implementados como módulos de propiedad intelectual, que permitan aliviar la carga computacional de las unidades de procesado de los sistemas en los que se integren. En la Tesis se proponen soluciones específicas para la implementación de dos tipos de operaciones habitualmente presentes en muchos sistemas de visión artificial: la sustracción de fondo y el etiquetado de componentes conexos. Las distintas alternativas surgen como consecuencia de aplicar una adecuada relación de compromiso entre funcionalidad y coste, entendiendo este último criterio en términos de recursos de cómputo, velocidad de operación y potencia consumida, lo que permite cubrir un amplio espectro de aplicaciones. En algunas de las soluciones propuestas se han utilizado además, técnicas de inferencia basadas en Lógica Difusa con idea de mejorar la calidad de los sistemas de visión resultantes. Para la realización de los diferentes bloques funcionales se ha seguido una metodología de diseño basada en modelos, que ha permitido la realización de todo el ciclo de desarrollo en un único entorno de trabajo. Dicho entorno combina herramientas informáticas que facilitan las etapas de codificación algorítmica, diseño de circuitos, implementación física y verificación funcional y temporal de las distintas alternativas, acelerando con ello todas las fases del flujo de diseño y posibilitando una exploración más eficiente del espacio de posibles soluciones. Asimismo, con el objetivo de demostrar la funcionalidad de las distintas aportaciones de esta Tesis Doctoral, algunas de las soluciones propuestas han sido integradas en sistemas de vídeo reales, que emplean buses estándares de uso común. Los dispositivos seleccionados para llevar a cabo estos demostradores han sido FPGAs y SoPCs de Xilinx, ya que sus excelentes propiedades para el prototipado y la construcción de sistemas que combinan componentes software y hardware, los convierten en candidatos ideales para dar soporte a la implementación de este tipo de sistemas.The continuous evolution of the Information and Communication Technologies (ICT), not only has allowed more than half of the global population to be currently interconnected through Internet, but it has also been the breeding ground for new paradigms such as Internet of Things (ioT) or Ambient Intelligence (AmI). These paradigms expose the need of interconnecting elements with different functionalities in order to achieve a digital, sensitive, adaptive and responsive environment that provides services of distinct nature to the users. The development of low cost devices, with small size, light weight and a high level of autonomy, processing power and ability for interaction is required to obtain this environment. Attending to this last feature, many of these devices will include the capacity to acquire, process and transmit images, extracting, interpreting and modifying the visual information that could be of interest for a certain application. This PhD Thesis, focused on the development of dedicated hardware for the implementation of image and video processing algorithms used in embedded systems, attempts to response to this challenge. The work has a two-fold purpose: on one hand, the search of solutions that, for its performance and properties, could be integrated on systems with strict requirements of functionality, size, power consumption and speed of operation; on the other hand, the design of a set of blocks that, packaged and implemented as IP-modules, allow to alleviate the computational load of the processing units of the systems where they could be integrated. In this Thesis, specific solutions for the implementation of two kinds of usual operations in many computer vision systems are provided. These operations are background subtraction and connected component labelling. Different solutions are created as the result of applying a good performance/cost trade-off (approaching this last criteria in terms of area, speed and consumed power), able to cover a wide range of applications. Inference techniques based on Fuzzy Logic have been applied to some of the proposed solutions in order to improve the quality of the resulting systems. To obtain the mentioned solutions, a model based-design methodology has been applied. This fact has allowed us to carry out all the design flow from a single work environment. That environment combines CAD tools that facilitate the stages of code programming, circuit design, physical implementation and functional and temporal verification of the different algorithms, thus accelerating the overall processes and making it possible to explore the space of solutions. Moreover, aiming to demonstrate the functionality of this PhD Thesis’s contributions, some of the proposed solutions have been integrated on real video systems that employ common and standard buses. The devices selected to perform these demonstrators have been FPGA and SoPCs (manufactured by Xilinx) since, due to their excellent properties for prototyping and creating systems that combine software and hardware components, they are ideal to develop these applications

Wildlife Communication

This report contains a progress report for the ph.d. project titled “Wildlife Communication”. The project focuses on investigating how signal processing and pattern recognition can be used to improve wildlife management in agriculture. Wildlife management systems used today experience habituation from wild animals which makes them ineffective. An intelligent wildlife management system could monitor its own effectiveness and alter its scaring strategy based on this

Application-aware optimization of Artificial Intelligence for deployment on resource constrained devices

Artificial intelligence (AI) is changing people's everyday life. AI techniques such as Deep Neural Networks (DNN) rely on heavy computational models, which are in principle designed to be executed on powerful HW platforms, such as desktop or server environments. However, the increasing need to apply such solutions in people's everyday life has encouraged the research for methods to allow their deployment on embedded, portable and stand-alone devices, such as mobile phones, which exhibit relatively low memory and computational resources. Such methods targets both the development of lightweight AI algorithms and their acceleration through dedicated HW. This thesis focuses on the development of lightweight AI solutions, with attention to deep neural networks, to facilitate their deployment on resource constrained devices. Focusing on the computer vision field, we show how putting together the self learning ability of deep neural networks with application-specific knowledge, in the form of feature engineering, it is possible to dramatically reduce the total memory and computational burden, thus allowing the deployment on edge devices. The proposed approach aims to be complementary to already existing application-independent network compression solutions. In this work three main DNN optimization goals have been considered: increasing speed and accuracy, allowing training at the edge, and allowing execution on a microcontroller. For each of these we deployed the resulting algorithm to the target embedded device and measured its performance