57,935 research outputs found
A Data-driven Approach to Robust Control of Multivariable Systems by Convex Optimization
The frequency-domain data of a multivariable system in different operating
points is used to design a robust controller with respect to the measurement
noise and multimodel uncertainty. The controller is fully parametrized in terms
of matrix polynomial functions and can be formulated as a centralized,
decentralized or distributed controller. All standard performance
specifications like , and loop shaping are considered in a
unified framework for continuous- and discrete-time systems. The control
problem is formulated as a convex-concave optimization problem and then
convexified by linearization of the concave part around an initial controller.
The performance criterion converges monotonically to a local optimal solution
in an iterative algorithm. The effectiveness of the method is compared with
fixed-structure controllers using non-smooth optimization and with full-order
optimal controllers via simulation examples. Finally, the experimental data of
a gyroscope is used to design a data-driven controller that is successfully
applied on the real system
Sum-of-Squares approach to feedback control of laminar wake flows
A novel nonlinear feedback control design methodology for incompressible
fluid flows aiming at the optimisation of long-time averages of flow quantities
is presented. It applies to reduced-order finite-dimensional models of fluid
flows, expressed as a set of first-order nonlinear ordinary differential
equations with the right-hand side being a polynomial function in the state
variables and in the controls. The key idea, first discussed in Chernyshenko et
al. 2014, Philos. T. Roy. Soc. 372(2020), is that the difficulties of treating
and optimising long-time averages of a cost are relaxed by using the
upper/lower bounds of such averages as the objective function. In this setting,
control design reduces to finding a feedback controller that optimises the
bound, subject to a polynomial inequality constraint involving the cost
function, the nonlinear system, the controller itself and a tunable polynomial
function. A numerically tractable approach to the solution of such optimisation
problems, based on Sum-of-Squares techniques and semidefinite programming, is
proposed.
To showcase the methodology, the mitigation of the fluctuation kinetic energy
in the unsteady wake behind a circular cylinder in the laminar regime at
Re=100, via controlled angular motions of the surface, is numerically
investigated. A compact reduced-order model that resolves the long-term
behaviour of the fluid flow and the effects of actuation, is derived using
Proper Orthogonal Decomposition and Galerkin projection. In a full-information
setting, feedback controllers are then designed to reduce the long-time average
of the kinetic energy associated with the limit cycle. These controllers are
then implemented in direct numerical simulations of the actuated flow. Control
performance, energy efficiency, and physical control mechanisms identified are
analysed. Key elements, implications and future work are discussed
Learning for Advanced Motion Control
Iterative Learning Control (ILC) can achieve perfect tracking performance for
mechatronic systems. The aim of this paper is to present an ILC design tutorial
for industrial mechatronic systems. First, a preliminary analysis reveals the
potential performance improvement of ILC prior to its actual implementation.
Second, a frequency domain approach is presented, where fast learning is
achieved through noncausal model inversion, and safe and robust learning is
achieved by employing a contraction mapping theorem in conjunction with
nonparametric frequency response functions. The approach is demonstrated on a
desktop printer. Finally, a detailed analysis of industrial motion systems
leads to several shortcomings that obstruct the widespread implementation of
ILC algorithms. An overview of recently developed algorithms, including
extensions using machine learning algorithms, is outlined that are aimed to
facilitate broad industrial deployment.Comment: 8 pages, 15 figures, IEEE 16th International Workshop on Advanced
Motion Control, 202
Determining Enclosure Breach Electromagnetically
A structure breach may be determined. A sensor, provided in the structure, may be driven with a constant frequency signal. The sensor may comprise a first conductive element and a second conductive element. The first conductive element may be substantially parallel with the second conductive element. A standing wave pattern may be induced on the sensor by the constant frequency signal reflecting off a termination point of the sensor. A least one characteristic of the sensor caused by the voltage standing wave pattern may be measured. A breach occurrence in the structure may be determined when the measured at least one characteristic varies from a previously determined value by a predetermined amount. The first conductive element and the second conductive element may be sandwiched between two layers comprising the structure. The structure may comprise a shipping container floor. The detected breach may comprise an opening greater than nine square inches.Georgia Tech Research Corporatio
A survey on fractional order control techniques for unmanned aerial and ground vehicles
In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade
CAutoCSD-evolutionary search and optimisation enabled computer automated control system design
This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of 'Computer-Aided Control System Design' (CACSD) to the novel 'Computer-Automated Control System Design' (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency-domains. Such performance-prioritised unification is aimed to relieve practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-committing to the adopted scheme. With the recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytically and practically, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, meets multiple objectives in designing an LTI controller for a non-minimum phase plant and offers a high-performing LTI controller network for a nonlinear chemical process
ERIGrid Holistic Test Description for Validating Cyber-Physical Energy Systems
Smart energy solutions aim to modify and optimise the operation of existing energy infrastructure. Such cyber-physical technology must be mature before deployment to the actual infrastructure, and competitive solutions will have to be compliant to standards still under development. Achieving this technology readiness and harmonisation requires reproducible experiments and appropriately realistic testing environments. Such testbeds for multi-domain cyber-physical experiments are complex in and of themselves. This work addresses a method for the scoping and design of experiments where both testbed and solution each require detailed expertise. This empirical work first revisited present test description approaches, developed a newdescription method for cyber-physical energy systems testing, and matured it by means of user involvement. The new Holistic Test Description (HTD) method facilitates the conception, deconstruction and reproduction of complex experimental designs in the domains of cyber-physical energy systems. This work develops the background and motivation, offers a guideline and examples to the proposed approach, and summarises experience from three years of its application.This work received funding in the European Communityâs Horizon 2020 Program (H2020/2014â2020)
under project âERIGridâ (Grant Agreement No. 654113)
- âŠ