Memristor MOS Content Addressable Memory (MCAM): Hybrid Architecture for Future High Performance Search Engines

Large-capacity Content Addressable Memory (CAM) is a key element in a wide variety of applications. The inevitable complexities of scaling MOS transistors introduce a major challenge in the realization of such systems. Convergence of disparate technologies, which are compatible with CMOS processing, may allow extension of Moore's Law for a few more years. This paper provides a new approach towards the design and modeling of Memristor (Memory resistor) based Content Addressable Memory (MCAM) using a combination of memristor MOS devices to form the core of a memory/compare logic cell that forms the building block of the CAM architecture. The non-volatile characteristic and the nanoscale geometry together with compatibility of the memristor with CMOS processing technology increases the packing density, provides for new approaches towards power management through disabling CAM blocks without loss of stored data, reduces power dissipation, and has scope for speed improvement as the technology matures.Comment: 10 pages, 11 figure

Memory Subsystems for Security, Consistency, and Scalability

In response to the continuous demand for the ability to process ever larger datasets, as well as discoveries in next-generation memory technologies, researchers have been vigorously studying memory-driven computing architectures that shall allow data-intensive applications to access enormous amounts of pooled non-volatile memory. As applications continue to interact with increasing amounts of components and datasets, existing systems struggle to eÿciently enforce the principle of least privilege for security. While non-volatile memory can retain data even after a power loss and allow for large main memory capacity, programmers have to bear the burdens of maintaining the consistency of program memory for fault tolerance as well as handling huge datasets with traditional yet expensive memory management interfaces for scalability. Today’s computer systems have become too sophisticated for existing memory subsystems to handle many design requirements. In this dissertation, we introduce three memory subsystems to address challenges in terms of security, consistency, and scalability. Specifcally, we propose SMVs to provide threads with fne-grained control over access privileges for a partially shared address space for security, NVthreads to allow programmers to easily leverage nonvolatile memory with automatic persistence for consistency, and PetaMem to enable memory-centric applications to freely access memory beyond the traditional process boundary with support for memory isolation and crash recovery for security, consistency, and scalability

Radiation-Hardened Solid-State Drive

A method is provided for a radiationhardened (rad-hard) solid-state drive for space mission memory applications by combining rad-hard and commercial off-the-shelf (COTS) non-volatile memories (NVMs) into a hybrid architecture. The architecture is controlled by a rad-hard ASIC (application specific integrated circuit) or a FPGA (field programmable gate array). Specific error handling and data management protocols are developed for use in a rad-hard environment. The rad-hard memories are smaller in overall memory density, but are used to control and manage radiation-induced errors in the main, and much larger density, non-rad-hard COTS memory devices. Small amounts of rad-hard memory are used as error buffers and temporary caches for radiation-induced errors in the large COTS memories. The rad-hard ASIC/FPGA implements a variety of error-handling protocols to manage these radiation-induced errors. The large COTS memory is triplicated for protection, and CRC-based counters are calculated for sub-areas in each COTS NVM array. These counters are stored in the rad-hard non-volatile memory. Through monitoring, rewriting, regeneration, triplication, and long-term storage, radiation-induced errors in the large NV memory are managed. The rad-hard ASIC/FPGA also interfaces with the external computer buses

Architecting Memory Systems for Emerging Technologies

The advance of traditional dynamic random access memory (DRAM) technology has slowed down, while the capacity and performance needs of memory system have continued to increase. This is a result of increasing data volume from emerging applications, such as machine learning and big data analytics. In addition to such demands, increasing energy consumption is becoming a major constraint on the capabilities of computer systems. As a result, emerging non-volatile memories, for example, Spin Torque Transfer Magnetic RAM (STT-MRAM), and new memory interfaces, for example, High Bandwidth Memory (HBM), have been developed as an alternative. Thus far, most previous studies have retained a DRAM-like memory architecture and management policy. This preserves compatibility but hides the true benefits of those new memory technologies. In this research, we proposed the co-design of memory architectures and their management policies for emerging technologies. First, we introduced a new memory architecture for an STT-MRAM main memory. In particular, we defined a new page mode operation for efficient activation and sensing. By fully exploiting the non-destructive nature of STT- MRAM, our design achieved higher performance, lower energy consumption, and a smaller area than the traditional designs. Second, we developed a cost-effective technique to improve load balancing for HBM memory channels. We showed that the proposed technique was capable of efficiently redistributing memory requests across multiple memory channels to improve the channel utilization, resulting in improved performance.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/145988/1/bcoh_1.pd

Implications of non-volatile memory as primary storage for database management systems

Traditional Database Management System (DBMS) software relies on hard disks for storing relational data. Hard disks are cheap, persistent, and offer huge storage capacities. However, data retrieval latency for hard disks is extremely high. To hide this latency, DRAM is used as an intermediate storage. DRAM is significantly faster than disk, but deployed in smaller capacities due to cost and power constraints, and without the necessary persistency feature that disks have. Non-Volatile Memory (NVM) is an emerging storage class technology which promises the best of both worlds. It can offer large storage capacities, due to better scaling and cost metrics than DRAM, and is non-volatile (persistent) like hard disks. At the same time, its data retrieval time is much lower than that of hard disks and it is also byte-addressable like DRAM. In this paper, we explore the implications of employing NVM as primary storage for DBMS. In other words, we investigate the modifications necessary to be applied on a traditional relational DBMS to take advantage of NVM features. As a case study, we have modified the storage engine (SE) of PostgreSQL enabling efficient use of NVM hardware. We detail the necessary changes and challenges such modifications entail and evaluate them using a comprehensive emulation platform. Results indicate that our modified SE reduces query execution time by up to 40% and 14.4% when compared to disk and NVM storage, with average reductions of 20.5% and 4.5%, respectively.The research leading to these results has received funding from the European Union’s 7th Framework Programme under grant agreement number 318633, the Ministry of Science and Technology of Spain under contract TIN2015-65316-P, and a HiPEAC collaboration grant awarded to Naveed Ul Mustafa.Peer ReviewedPostprint (author's final draft

Performance Evaluation of Big Data Processing at the Edge for IoT-Blockchain Applications

Internet-of-Things (IoT) utilising sensors is effective in performing continuous monitoring, while Blockchain is ideal in guaranteeing integrity and immutability of these IoT data. There are many challenges in integrating IoT and Blockchain together mainly because IoT devices have limited computational resources, and storage capacity while Blockchain processing incurs high CPU cost and high latency in data transfer. We propose a fully distributed edge computing architecture coupled with an efficient storage system that is based on Non-Volatile Memory express Over Fabrics (NVMeOF) to provide efficient IoT data processing for supply chain management. The data is secured using Blockchain at the edge to ensure traceability, security and non-repudiation in the data. An evaluation of our implementation and performance comparison between NVMeOF and SATA storage interfaces for our IoT-Blockchain architecture is presented