Mac-Phy Cross-Layer analysis and design of Mimo-Ofdm Wlans based on fast link adaptation

The latestWLAN standard, known as IEEE 802.11n, has notably increased the network capacity with respect to its predecessors thanks to the incorporation of the multipleinput multiple-output (MIMO) technology. Nonetheless, the new amendment, as its previous ones, does not specify how crucial configuration mechanisms, most notably the adaptive modulation and coding (AMC) algorithm should be implemented. The AMC process has proved essential to fully exploit the system resources in light of varying channel conditions. In this dissertation, a closed-loop AMC technique, referred to as fast link adaption (FLA) algorithm, that effectively selects themodulation and coding scheme (MCS) for multicarriermultiantennaWLAN networks is proposed. The FLA algorithm determines the MCS that maximizes the throughput while satisfying a quality of service (QoS) constraint, usually defined in the form of an objective packet error rate (PER). To this end, FLA uses a packet/bit error rate prediction methodology based on the exponential effective SNRmetric (EESM). The FLA algorithm performance has been evaluated under IEEE 802.11n systems that thanks to the incorporation of a feedbackmechanismare able to implement closed- loop AMC mechanisms. Initially, this AMC technique relies only on physical layer information but it is subsequently extended to also take into account themediumaccess control (MAC) sublayer performance. At the physical layer, the FLA algorithm has demonstrated its effectivity by performing very close to optimality in terms of throughput, while satisfying a prescribed PER constraint. The FLA algorithm has also been evaluated using imperfect channel information. It has been observed that the proposed FLA technique is rather robust against imperfect channel information, and only in highly-frequency selective channels, imperfect channel knowledge causes a noticeable degradation in throughput. At the MAC sublayer, the FLA algorithm has been complemented with a timeout strategy that weighs down the influence of the available channel information as this becomes outdated. This channel information outdate is caused by the MAC sublayer whose user multiplexing policy potentially results in large delays between acquiring the instant in which the channel state information is acquired and that in which the channel is accessed. Results demonstrate the superiority of FLA when compared to open-loop algorithms under saturated and non-saturated conditions and irrespective of the packet length, number of users, protocol (CSMA/CA or CDMA/E2CA) and access scheme (Basic Access or RTS/CTS). Additionally, several analytical models have been developed to estimate the system performance at the MAC sublayer. These models account for all operational details of the IEEE 802.11n MAC sublayer, such as finite number of retries, anomalous slot or channel errors. In particular, a semi-analytical model that assesses the MAC layer throughput under saturated conditions, considering the AMC performance is first introduced. Then, an analytical model that allows the evaluation of the QoS performance under non-saturated conditions is presented. This model focuses on single MCS and it is able to accurately predict very important system performance metrics such as blocking probability, delay, probability of discard or goodput thanks to the consideration of the finite queues on each station. Finally, the previous non-saturated analytical approach is used to define a semi-analytical model in order to estimate the system performance when considering AMC algorithms (i.e. whenmultiple MCSs are available)La darrera versió de l’estàndard deWLAN, anomenada IEEE 802.11n, ha augmentat la seva capacitat notablement en relació als sistemes anteriors gràcies a la incorporació de la tecnologia de múltiples antenes en transmissió i recepció (MIMO). No obstant això, la nova proposta, al igual que les anteriors, segueix sense especificar com s’han d’implementar elsmecanismes de configuraciómés crucials, un dels quals és l’algoritme de codificació imodulació adaptativa (AMC). Aquests algoritmes ja han demostrat la seva importància a l’hora demaximitzar el rendiment del sistema tenint en compte les condicions canviants del canal. En aquesta tesis s’ha proposat un algoritme AMC de llaç tancat, anomenat adaptació ràpida de l’enllaç (FLA), que selecciona eficientment l’esquema demodulació i codificació adaptativa per xarxes WLAN basades en arquitectures multiportadora multiantena. L’algoritme FLA determina el mode de transmissió capaç de maximitzar el throughput per les condicions de canal actuals, mentre satisfà un requisit de qualitat de servei en forma de taxa d’error per paquet (PER). FLA utilitza una metodologia de predicció de PER basada en l’estimació de la relació senyal renou (SNR) efectiva exponencial (EESM). El rendiment de l’algoritme FLA ha estat avaluat en sistemes IEEE 802.11n, ja que aquests, gràcies a la incorporació d’unmecanisme de realimentació demodes de transmissió, poden adoptar solucions AMC de llaç tancat. En una primera part, l’estudi s’ha centrat a la capa física i després s’ha estès a la subcapa MAC. A la capa física s’ha demostrat l’efectivitat de l’algoritme FLA aconseguint un rendiment molt proper al que ens proporcionaria un esquema AMC òptim en termes de throughput, alhora que es satisfan els requisits de PER objectiu. L’algoritme FLA també ha estat avaluat utilitzant informació imperfecte del canal. S’ha vist que l’algoritme FLA proposat és robust en front dels efectes d’estimació imperfecte del canal, i només en canals altament selectius en freqüència, la informació imperfecte del canal provoca una davallada en el rendiment en termes de throughput. A la subcapa MAC, l’algoritme FLA ha estat complementat amb una estratègia de temps d’espera que disminueix la dependència amb la informació de canal disponible a mesura que aquesta va quedant desfassada respecte de l’estat actual. Aquesta informació de canal desfassada és conseqüència de la subcapa MAC que degut a la multiplexació d’usuaris introdueix grans retards entre que es determina el mode de transmissió més adequat i la seva utilització per a l’accés al canal. Els resultats obtinguts han demostrat la superioritat de FLA respecte d’altres algoritmes de llaç obert en condicions de saturació i de no saturació, i independentment de la longitud de paquet, nombre d’usuaris, protocol (CSMA/CA i CSMA/E2CA) i esquema d’accés (Basic Access i RTS/CTS). Amés, s’han desenvolupat diversosmodels analítics per tal d’estimar el rendiment del sistema a la subcapa MAC. Aquests models consideren tots els detalls de funcionament de la subcapaMAC del 802.11n, comper exemple un nombre finit de retransmissions de cada paquet, l’slot anòmal o els errors introduïts pel canal. Inicialment s’ha proposat unmodel semi-analític que determina el throughtput en condicions de saturació, considerant el rendiment dels algoritmes AMC. Després s’ha presentat un model analític que estima el rendiment del sistema per condicions de no saturació, mitjançat elmodelat de cues finites a cada estació. Aquestmodel consideramodes de transmissió fixes i és capaç de determinar de manera molt precisa mètriques de rendimentmolt importants comsón la probabilitat de bloqueig de cada estació, el retard mitjà del paquets, la probabilitat de descart o la mesura del goodput. Finalment, el model analític de no saturació s’ha utilitzat per definir un model semi-analític per tal d’estimar el rendiment del sistema quan es considera l’ús d’algoritmes AMC

Video QoS/QoE over IEEE802.11n/ac: A Contemporary Survey

The demand for video applications over wireless networks has tremendously increased, and IEEE 802.11 standards have provided higher support for video transmission. However, providing Quality of Service (QoS) and Quality of Experience (QoE) for video over WLAN is still a challenge due to the error sensitivity of compressed video and dynamic channels. This thesis presents a contemporary survey study on video QoS/QoE over WLAN issues and solutions. The objective of the study is to provide an overview of the issues by conducting a background study on the video codecs and their features and characteristics, followed by studying QoS and QoE support in IEEE 802.11 standards. Since IEEE 802.11n is the current standard that is mostly deployed worldwide and IEEE 802.11ac is the upcoming standard, this survey study aims to investigate the most recent video QoS/QoE solutions based on these two standards. The solutions are divided into two broad categories, academic solutions, and vendor solutions. Academic solutions are mostly based on three main layers, namely Application, Media Access Control (MAC) and Physical (PHY) which are further divided into two major categories, single-layer solutions, and cross-layer solutions. Single-layer solutions are those which focus on a single layer to enhance the video transmission performance over WLAN. Cross-layer solutions involve two or more layers to provide a single QoS solution for video over WLAN. This thesis has also presented and technically analyzed QoS solutions by three popular vendors. This thesis concludes that single-layer solutions are not directly related to video QoS/QoE, and cross-layer solutions are performing better than single-layer solutions, but they are much more complicated and not easy to be implemented. Most vendors rely on their network infrastructure to provide QoS for multimedia applications. They have their techniques and mechanisms, but the concept of providing QoS/QoE for video is almost the same because they are using the same standards and rely on Wi-Fi Multimedia (WMM) to provide QoS

Evaluations and Enhancements in 802.11n WLANs – Error-Sensitive Adaptive Frame Aggregation

IEEE 802.11n is a developing next-generation standard for wireless local area network (LAN). Seamless multimedia traffic connection will become possible with the 802.11n improvement in the Physical and MAC layer. The new 802.11n frame aggregation technique is particularly important for enhancing MAC layer efficiency under high speed wireless LAN. Although the frame aggregation can increase the efficiency in the MAC layer, it does not provide good performance in high BER channels when using large frame aggregation size. An Optimal Frame Aggregation (OFA) technique for AMSDU frame under different BERs in 802.11n WLANs was proposed. However, the suggested algorithm does not take into account the loss rate and the delay performance requirements for Voice or Video multimedia traffic in various BER channels. The optimal frame size can provide good throughput in the network, but the delay might exceed the Quality of Service (QoS) requirement of Voice traffic or the Frame-Error-Rate (FER) might exceed the maximum loss rate tolerable by the streaming Video traffic. We propose an Error- Sensitive Adaptive Frame Aggregation (ESAFA) scheme which can dynamically set the size of AMSDU frame based on the maximum Frame-Error-Rate (FER) tolerable by a particular multimedia traffic. The simulations show that our adaptive algorithm outperforms the optimal frame algorithm by improving both the delay and the loss rate in the 802.11n WLANs. The measured FER of the Error-Sensitive Adaptive Frame Aggregation scheme can be kept at about the same as the loss rate requirement for Video traffic even under high Bit-Error-Rate (BER) channel. The delay compared to OFA is also decreased by around 50% under different channel conditions. Moreover, the results show that the Error-Sensitive Adaptive Frame Aggregation scheme works particularly well in error-prone wireless networks

Low energy indoor network : deployment optimisation

This article considers what the minimum energy indoor access point deployment is in order to achieve a certain downlink quality-of-service. The article investigates two conventional multiple-access technologies, namely: LTE-femtocells and 802.11n Wi-Fi. This is done in a dynamic multi-user and multi-cell interference network. Our baseline results are reinforced by novel theoretical expressions. Furthermore, the work underlines the importance of considering optimisation when accounting for the capacity saturation of realistic modulation and coding schemes. The results in this article show that optimising the location of access points both within a building and within the individual rooms is critical to minimise the energy consumption

Belaidžio ryšio tinklų terpės prieigos valdymo tyrimas

Over the years, consumer requirements for Quality of Service (QoS) has been growing exponentially. Recently, the ratification process of newly IEEE 802.11ad amendment to IEEE 802.11 was finished. The IEEE 802.11ad is the newly con-sumer wireless communication approach, which will gain high spot on the 5G evolution. Major players in wireless market, such as Qualcomm already are inte-grating solutions from unlicensed band, like IEEE 802.11ac, IEEE 802.11ad into their architecture of LTE PRO (the next evolutionary step for 5G networking) (Qualcomm 2013; Parker et al. 2015). As the demand is growing both in enter-prise wireless networking and home consumer markets. Consumers started to no-tice the performance degradation due to overcrowded unlicensed bands. The un-licensed bands such as 2.4 GHz, 5 GHz are widely used for up-to-date IEEE 802.11n/ac technologies with upcoming IEEE 802.11ax. However, overusage of the available frequency leads to severe interference issue and consequences in to-tal system performance degradation, currently existing wireless medium access method can not sustain the increasing intereference and thus wireless needs a new methods of wireless medium access. The main focal point of this dissertation is to improve wireless performance in dense wireless networks. In dissertation both the conceptual and multi-band wireless medium access methods are considered both from theoretical point of view and experimental usage. The introduction chapter presents the investigated problem and it’s objects of research as well as importance of dissertation and it’s scientific novelty in the unlicensed wireless field. Chapter 1 revises used literature. Existing and up-to-date state-of-the-art so-lution are reviewed, evaluated and key point advantages and disadvantages are analyzed. Conclusions are drawn at the end of the chapter. Chapter 2 describes theoretical analysis of wireless medium access protocols and the new wireless medium access method. During analysis theoretical simula-tions are performed. Conclusions are drawn at the end of the chapter. Chapter 3 is focused on the experimental components evaluation for multi-band system, which would be in line with theoretical concept investigations. The experimental results, showed that components of multi-band system can gain sig-nificant performance increase when compared to the existing IEEE 802.11n/ac wireless systems. General conclusions are drawn after analysis of measurement results

Energy Efficiency in Communications and Networks

The topic of "Energy Efficiency in Communications and Networks" attracts growing attention due to economical and environmental reasons. The amount of power consumed by information and communication technologies (ICT) is rapidly increasing, as well as the energy bill of service providers. According to a number of studies, ICT alone is responsible for a percentage which varies from 2% to 10% of the world power consumption. Thus, driving rising cost and sustainability concerns about the energy footprint of the IT infrastructure. Energy-efficiency is an aspect that until recently was only considered for battery driven devices. Today we see energy-efficiency becoming a pervasive issue that will need to be considered in all technology areas from device technology to systems management. This book is seeking to provide a compilation of novel research contributions on hardware design, architectures, protocols and algorithms that will improve the energy efficiency of communication devices and networks and lead to a more energy proportional technology infrastructure

Experimenting with commodity 802.11 hardware: overview and future directions

The huge adoption of 802.11 technologies has triggered a vast amount of experimentally-driven research works. These works range from performance analysis to protocol enhancements, including the proposal of novel applications and services. Due to the affordability of the technology, this experimental research is typically based on commercial off-the-shelf (COTS) devices, and, given the rate at which 802.11 releases new standards (which are adopted into new, affordable devices), the field is likely to continue to produce results. In this paper, we review and categorise the most prevalent works carried out with 802.11 COTS devices over the past 15 years, to present a timely snapshot of the areas that have attracted the most attention so far, through a taxonomy that distinguishes between performance studies, enhancements, services, and methodology. In this way, we provide a quick overview of the results achieved by the research community that enables prospective authors to identify potential areas of new research, some of which are discussed after the presentation of the survey.This work has been partly supported by the European Community through the CROWD project (FP7-ICT-318115) and by the Madrid Regional Government through the TIGRE5-CM program (S2013/ICE-2919).Publicad