Distributed Artificial Intelligence Solution for D2D Communication in 5G Networks

Device to Device (D2D) Communication is one of the technology components of the evolving 5G architecture, as it promises improvements in energy efficiency, spectral efficiency, overall system capacity, and higher data rates. The above noted improvements in network performance spearheaded a vast amount of research in D2D, which have identified significant challenges that need to be addressed before realizing their full potential in emerging 5G Networks. Towards this end, this paper proposes the use of a distributed intelligent approach to control the generation of D2D networks. More precisely, the proposed approach uses Belief-Desire-Intention (BDI) intelligent agents with extended capabilities (BDIx) to manage each D2D node independently and autonomously, without the help of the Base Station. The paper includes detailed algorithmic description for the decision of transmission mode, which maximizes the data rate, minimizes the power consumptions, while taking into consideration the computational load. Simulations show the applicability of BDI agents in jointly solving D2D challenges.Comment: 10 pages,9 figure

Cross-layer optimization for cooperative content distribution in multihop device-to-device networks

With the ubiquity of wireless network and the intelligentization of machines, Internet of Things (IoT) has come to people's horizon. Device-to-device (D2D), as one advanced technique to achieve the vision of IoT, supports a high speed peer-to-peer transmission without fixed infrastructure forwarding which can enable fast content distribution in local area. In this paper, we address the content distribution problem by multihop D2D communication with decentralized content providers locating in the networks. We consider a cross-layer multidimension optimization involving frequency, space, and time, to minimize the network average delay. Considering the multicast feature, we first formulate the problem as a coalitional game based on the payoffs of content requesters, and then, propose a time-varying coalition formation-based algorithm to spread the popular content within the shortest possible time. Simulation results show that the proposed approach can achieve a fast content distribution across the whole area, and the performance on network average delay is much better than other heuristic approaches

Power-Aware Planning and Design for Next Generation Wireless Networks

Mobile network operators have witnessed a transition from being voice dominated to video/data domination, which leads to a dramatic traffic growth over the past decade. With the 4G wireless communication systems being deployed in the world most recently, the fifth generation (5G) mobile and wireless communica- tion technologies are emerging into research fields. The fast growing data traffic volume and dramatic expansion of network infrastructures will inevitably trigger tremendous escalation of energy consumption in wireless networks, which will re- sult in the increase of greenhouse gas emission and pose ever increasing urgency on the environmental protection and sustainable network development. Thus, energy-efficiency is one of the most important rules that 5G network planning and design should follow. This dissertation presents power-aware planning and design for next generation wireless networks. We study network planning and design problems in both offline planning and online resource allocation. We propose approximation algo- rithms and effective heuristics for various network design scenarios, with different wireless network setups and different power saving optimization objectives. We aim to save power consumption on both base stations (BSs) and user equipments (UEs) by leveraging wireless relay placement, small cell deployment, device-to- device communications and base station consolidation. We first study a joint signal-aware relay station placement and power alloca- tion problem with consideration for multiple related physical constraints such as channel capacity, signal to noise ratio requirement of subscribers, relay power and network topology in multihop wireless relay networks. We present approximation schemes which first find a minimum number of relay stations, using maximum transmit power, to cover all the subscribers meeting each SNR requirement, and then ensure communications between any subscriber and a base station by ad- justing the transmit power of each relay station. In order to save power on BS, we propose a practical solution and offer a new perspective on implementing green wireless networks by embracing small cell networks. Many existing works have proposed to schedule base station into sleep to save energy. However, in reality, it is very difficult to shut down and reboot BSs frequently due to nu- merous technical issues and performance requirements. Instead of putting BSs into sleep, we tactically reduce the coverage of each base station, and strategi- cally place microcells to offload the traffic transmitted to/from BSs to save total power consumption. In online resource allocation, we aim to save tranmit power of UEs by en- abling device-to-device (D2D) communications in OFDMA-based wireless net- works. Most existing works on D2D communications either targeted CDMA- based single-channel networks or aimed at maximizing network throughput. We formally define an optimization problem based on a practical link data rate model, whose objective is to minimize total power consumption while meeting user data rate requirements. We propose to solve it using a joint optimization approach by presenting two effective and efficient algorithms, which both jointly determine mode selection, channel allocation and power assignment. In the last part of this dissertation, we propose to leverage load migration and base station consolidation for green communications and consider a power- efficient network planning problem in virtualized cognitive radio networks with the objective of minimizing total power consumption while meeting traffic load demand of each Mobile Virtual Network Operator (MVNO). First we present a Mixed Integer Linear Programming (MILP) to provide optimal solutions. Then we present a general optimization framework to guide algorithm design, which solves two subproblems, channel assignment and load allocation, in sequence. In addition, we present an effective heuristic algorithm that jointly solves the two subproblems. Numerical results are presented to confirm the theoretical analysis of our schemes, and to show strong performances of our solutions, compared to several baseline methods

Device-to-Device Communication in 5G: Towards Efficient Scheduling

5G wireless networks are expected to carry large traffic volumes due to the growth of mobile devices and the increasing demand for high data rates from applications. Device to device communication is one of the suggested technologies to support this increasing load and enhance the capacity of networks. However, the implementation of D2D communication reveals many barriers that include communication scheduling, for which the architecture remains complex and obscure. In this paper, an overview of the available literature on the implementation of networks supporting D2D communication is presented, emphasizing the complexity of the offered solutions. This paper also offers a study of the impact of different device distribution models on the throughput of the devices. The paper introduces the challenges and makes the case for the need to find a more efficient D2D scheduler providing less complexity

Robust Device-to-Device 5G cellular communication in the post-disaster scenario

The wireless communication is an integral part of the society, however, wireless network infrastructure may not fully function during post-disaster wireless network scenario in which we need wireless services even more than normal circumstances. In such post-disaster scenarios, the base stations (BS) could possibly be dysfunctional or overloaded by an excessive number of user calls or data, whereas user terminals are likely to be partially connected to or fully isolated from the BS radio signals. In this paper, we study the network behavior during the post-disaster when BSs undergo the thinning process due to the damage to the network infrastructure. During network recovery phase, we also study the network performance when new temporary BSs are distributed which will bring the network into BS superposition phase. Furthermore, Device-to-Device (D2D) assisted cellular communication helps to increase the link level network connectivity which is highly appreciated during postdisaster network scenario because the network coverage is more desirable than the network throughout in such cases. We also present the analytical study of D2D and cellular communication and show that it will effectively increase the network coverage which may ultimately save many lives during the golden hours of post-disaster phase

Joint relay selection and resource allocation for energy-efficient D2D cooperative communications using matching theory

Device-to-device (D2D) cooperative relay can improve network coverage and throughput by assisting users with inferior channel conditions to implement multi-hop transmissions. Due to the limited battery capacity of handheld equipment, energy efficiency is an important issue to be optimized. Considering the two-hop D2D relay communication scenario, this paper focuses on how to maximize the energy efficiency while guaranteeing the quality of service (QoS) requirements of both cellular and D2D links by jointly optimizing relay selection, spectrum allocation and power control. Since the four-dimensional matching involved in the joint optimization problem is NP-hard, a pricing-based two-stage matching algorithm is proposed to reduce dimensionality and provide a tractable solution. In the first stage, the spectrum resources reused by relay-to-receiver links are determined by a two-dimensional matching. Then, a three-dimensional matching is conducted to match users, relays and the spectrum resources reused by transmitter-to-relay links. In the process of preference establishment of the second stage, the optimal transmit power is solved to guarantee that the D2D link has the maximized energy efficiency. Simulation results show that the proposed algorithm not only has a good performance on energy efficiency, but also enhances the average number of served users compared to the case without any relay

Device-to-Device Communication and Multihop Transmission for Future Cellular Networks

The next generation wireless networks i.e. 5G aim to provide multi-Gbps data traffic, in order to satisfy the increasing demand for high-definition video, among other high data rate services, as well as the exponential growth in mobile subscribers. To achieve this dramatic increase in data rates, current research is focused on improving the capacity of current 4G network standards, based on Long Term Evolution (LTE), before radical changes are exploited which could include acquiring additional/new spectrum. The LTE network has a reuse factor of one; hence neighbouring cells/sectors use the same spectrum, therefore making the cell edge users vulnerable to inter-cell interference. In addition, wireless transmission is commonly hindered by fading and pathloss. In this direction, this thesis focuses on improving the performance of cell edge users in LTE and LTE-Advanced (LTE-A) networks by initially implementing a new Coordinated Multi-Point (CoMP) algorithm to mitigate cell edge user interference. Subsequently Device-to-Device (D2D) communication is investigated as the enabling technology for maximising Resource Block (RB) utilisation in current 4G and emerging 5G networks. It is demonstrated that the application, as an extension to the above, of novel power control algorithms, to reduce the required D2D TX power, and multihop transmission for relaying D2D traffic, can further enhance network performance. To be able to develop the aforementioned technologies and evaluate the performance of new algorithms in emerging network scenarios, a beyond-the-state-of-the-art LTE system-level simulator (SLS) was implemented. The new simulator includes Multiple-Input Multiple-Output (MIMO) antenna functionalities, comprehensive channel models (such as Wireless World initiative New Radio II i.e. WINNER II) and adaptive modulation and coding schemes to accurately emulate the LTE and LTE-A network standards. Additionally, a novel interference modelling scheme using the ‘wrap around’ technique was proposed and implemented that maintained the topology of flat surfaced maps, allowing for use with cell planning tools while obtaining accurate and timely results in the SLS compared to the few existing platforms. For the proposed CoMP algorithm, the adaptive beamforming technique was employed to reduce interference on the cell edge UEs by applying Coordinated Scheduling (CoSH) between cooperating cells. Simulation results show up to 2-fold improvement in terms of throughput, and also shows SINR gain for the cell edge UEs in the cooperating cells. Furthermore, D2D communication underlaying the LTE network (and future generation of wireless networks) was investigated. The technology exploits the proximity of users in a network to achieve higher data rates with maximum RB utilisation (as the technology reuses the cellular RB simultaneously), while taking some load off the Evolved Node B (eNB) i.e. by direct communication between User Equipment (UE). Simulation results show that the proximity and transmission power of D2D transmission yields high performance gains for a D2D receiver, which was demonstrated to be better than that of cellular UEs with better channel conditions or in close proximity to the eNB in the network. The impact of interference from the simultaneous transmission however impedes the achievable data rates of cellular UEs in the network, especially at the cell edge. Thus, a power control algorithm was proposed to mitigate the impact of interference in the hybrid network (network consisting of both cellular and D2D UEs). It was implemented by setting a minimum SINR threshold so that the cellular UEs achieve a minimum performance, and equally a maximum SINR threshold to establish fairness for the D2D transmission as well. Simulation results show an increase in the cell edge throughput and notable improvement in the overall SINR distribution of UEs in the hybrid network. Additionally, multihop transmission for D2D UEs was investigated in the hybrid network: traditionally, the scheme is implemented to relay cellular traffic in a homogenous network. Contrary to most current studies where D2D UEs are employed to relay cellular traffic, the use of idle nodes to relay D2D traffic was implemented uniquely in this thesis. Simulation results show improvement in D2D receiver throughput with multihop transmission, which was significantly better than that of the same UEs performance with equivalent distance between the D2D pair when using single hop transmission

Recent Advances in Cellular D2D Communications

Device-to-device (D2D) communications have attracted a great deal of attention from researchers in recent years. It is a promising technique for offloading local traffic from cellular base stations by allowing local devices, in physical proximity, to communicate directly with each other. Furthermore, through relaying, D2D is also a promising approach to enhancing service coverage at cell edges or in black spots. However, there are many challenges to realizing the full benefits of D2D. For one, minimizing the interference between legacy cellular and D2D users operating in underlay mode is still an active research issue. With the 5th generation (5G) communication systems expected to be the main data carrier for the Internet-of-Things (IoT) paradigm, the potential role of D2D and its scalability to support massive IoT devices and their machine-centric (as opposed to human-centric) communications need to be investigated. New challenges have also arisen from new enabling technologies for D2D communications, such as non-orthogonal multiple access (NOMA) and blockchain technologies, which call for new solutions to be proposed. This edited book presents a collection of ten chapters, including one review and nine original research works on addressing many of the aforementioned challenges and beyond