Assessing and augmenting SCADA cyber security: a survey of techniques

SCADA systems monitor and control critical infrastructures of national importance such as power generation and distribution, water supply, transportation networks, and manufacturing facilities. The pervasiveness, miniaturisations and declining costs of internet connectivity have transformed these systems from strictly isolated to highly interconnected networks. The connectivity provides immense benefits such as reliability, scalability and remote connectivity, but at the same time exposes an otherwise isolated and secure system, to global cyber security threats. This inevitable transformation to highly connected systems thus necessitates effective security safeguards to be in place as any compromise or downtime of SCADA systems can have severe economic, safety and security ramifications. One way to ensure vital asset protection is to adopt a viewpoint similar to an attacker to determine weaknesses and loopholes in defences. Such mind sets help to identify and fix potential breaches before their exploitation. This paper surveys tools and techniques to uncover SCADA system vulnerabilities. A comprehensive review of the selected approaches is provided along with their applicability

Improving cyber security in industrial control system environment.

Integrating industrial control system (ICS) with information technology (IT) and internet technologies has made industrial control system environments (ICSEs) more vulnerable to cyber-attacks. Increased connectivity has brought about increased security threats, vulnerabilities, and risks in both technology and people (human) constituents of the ICSE. Regardless of existing security solutions which are chiefly tailored towards technical dimensions, cyber-attacks on ICSEs continue to increase with a proportionate level of consequences and impacts. These consequences include system failures or breakdowns, likewise affecting the operations of dependent systems. Impacts often include; marring physical safety, triggering loss of lives, causing huge economic damages, and thwarting the vital missions of productions and businesses. This thesis addresses uncharted solution paths to the above challenges by investigating both technical and human-factor security evaluations to improve cyber security in the ICSE. An ICS testbed, scenario-based, and expert opinion approaches are used to demonstrate and validate cyber-attack feasibility scenarios. To improve security of ICSs, the research provides: (i) an adaptive operational security metrics generation (OSMG) framework for generating suitable security metrics for security evaluations in ICSEs, and a list of good security metrics methodology characteristics (scope-definitive, objective-oriented, reliable, simple, adaptable, and repeatable), (ii) a technical multi-attribute vulnerability (and impact) assessment (MAVCA) methodology that considers and combines dynamic metrics (temporal and environmental) attributes of vulnerabilities with the functional dependency relationship attributes of the vulnerability host components, to achieve a better representation of exploitation impacts on ICSE networks, (iii) a quantitative human-factor security (capability and vulnerability) evaluation model based on human-agent security knowledge and skills, used to identify the most vulnerable human elements, identify the least security aspects of the general workforce, and prioritise security enhancement efforts, and (iv) security risk reduction through critical impact point assessment (S2R-CIPA) process model that demonstrates the combination of technical and human-factor security evaluations to mitigate risks and achieve ICSE-wide security enhancements. The approaches or models of cyber-attack feasibility testing, adaptive security metrication, multi-attribute impact analysis, and workforce security capability evaluations can support security auditors, analysts, managers, and system owners of ICSs to create security strategies and improve cyber incidence response, and thus effectively reduce security risk.PhD in Manufacturin

Cyber-Physical Production Testbed: Literature Review and Concept Development

Many researchers use virtual and simulation-based testbed technology for research in production and maintenance optimization. Although, the virtual environment produces good results, it cannot imitate the unexpected changes that occur in actual production. There are very few physical testbeds emulating actual production environment. The aim of this paper is to present a concept of a cyber-physical production testbed based on review of Cyber-Physical Systems (CPS) testbeds in research. The testbed consists of a semi-automatic production line equipped with system monitoring tools, data analysis capabilities and commercial software. This testbed will be used for demonstration of data acquisition for production and maintenance prioritization. Additionally, the testbed will be used for research in IoT platforms for production optimization

Intrusion Detection for Cyber-Physical Attacks in Cyber-Manufacturing System

In the vision of Cyber-Manufacturing System (CMS) , the physical components such as products, machines, and tools are connected, identifiable and can communicate via the industrial network and the Internet. This integration of connectivity enables manufacturing systems access to computational resources, such as cloud computing, digital twin, and blockchain. The connected manufacturing systems are expected to be more efficient, sustainable and cost-effective. However, the extensive connectivity also increases the vulnerability of physical components. The attack surface of a connected manufacturing environment is greatly enlarged. Machines, products and tools could be targeted by cyber-physical attacks via the network. Among many emerging security concerns, this research focuses on the intrusion detection of cyber-physical attacks. The Intrusion Detection System (IDS) is used to monitor cyber-attacks in the computer security domain. For cyber-physical attacks, however, there is limited work. Currently, the IDS cannot effectively address cyber-physical attacks in manufacturing system: (i) the IDS takes time to reveal true alarms, sometimes over months; (ii) manufacturing production life-cycle is shorter than the detection period, which can cause physical consequences such as defective products and equipment damage; (iii) the increasing complexity of network will also make the detection period even longer. This gap leaves the cyber-physical attacks in manufacturing to cause issues like over-wearing, breakage, defects or any other changes that the original design didn’t intend. A review on the history of cyber-physical attacks, and available detection methods are presented. The detection methods are reviewed in terms of intrusion detection algorithms, and alert correlation methods. The attacks are further broken down into a taxonomy covering four dimensions with over thirty attack scenarios to comprehensively study and simulate cyber-physical attacks. A new intrusion detection and correlation method was proposed to address the cyber-physical attacks in CMS. The detection method incorporates IDS software in cyber domain and machine learning analysis in physical domain. The correlation relies on a new similarity-based cyber-physical alert correlation method. Four experimental case studies were used to validate the proposed method. Each case study focused on different aspects of correlation method performance. The experiments were conducted on a security-oriented manufacturing testbed established for this research at Syracuse University. The results showed the proposed intrusion detection and alert correlation method can effectively disclose unknown attack, known attack and attack interference that causes false alarms. In case study one, the alarm reduction rate reached 99.1%, with improvement of detection accuracy from 49.6% to 100%. The case studies also proved the proposed method can mitigate false alarms, detect attacks on multiple machines, and attacks from the supply chain. This work contributes to the security domain in cyber-physical manufacturing systems, with the focus on intrusion detection. The dataset collected during the experiments has been shared with the research community. The alert correlation methodology also contributes to cyber-physical systems, such as smart grid and connected vehicles, which requires enhanced security protection in today’s connected world

On the assessment of cyber risks and attack surfaces in a real-time co-simulation cybersecurity testbed for inverter-based microgrids

The integration of variable distributed generations (DGs) and loads in microgrids (MGs) has made the reliance on communication systems inevitable for information exchange in both control and protection architectures to enhance the overall system reliability, resiliency and sustainability. This communication backbone in turn also exposes MGs to potential malicious cyber attacks. To study these vulnerabilities and impacts of various cyber attacks, testbeds play a crucial role in managing their complexity. This research work presents a detailed study of the development of a real-time co-simulation testbed for inverter-based MGs. It consists of a OP5700 real-time simulator, which is used to emulate both the physical and cyber layer of an AC MG in real time through HYPERSIM software; and SEL-3530 Real-Time Automation Controller (RTAC) hardware configured with ACSELERATOR RTAC SEL-5033 software. A human–machine interface (HMI) is used for local/remote monitoring and control. The creation and management of HMI is carried out in ACSELERATOR Diagram Builder SEL-5035 software. Furthermore, communication protocols such as Modbus, sampled measured values (SMVs), generic object-oriented substation event (GOOSE) and distributed network protocol 3 (DNP3) on an Ethernet-based interface were established, which map the interaction among the corresponding nodes of cyber-physical layers and also synchronizes data transmission between the systems. The testbed not only provides a real-time co-simulation environment for the validation of the control and protection algorithms but also extends to the verification of various detection and mitigation algorithms. Moreover, an attack scenario is also presented to demonstrate the ability of the testbed. Finally, challenges and future research directions are recognized and discussed

A Systematic Review of the State of Cyber-Security in Water Systems

Critical infrastructure systems are evolving from isolated bespoke systems to those that use general-purpose computing hosts, IoT sensors, edge computing, wireless networks and artificial intelligence. Although this move improves sensing and control capacity and gives better integration with business requirements, it also increases the scope for attack from malicious entities that intend to conduct industrial espionage and sabotage against these systems. In this paper, we review the state of the cyber-security research that is focused on improving the security of the water supply and wastewater collection and treatment systems that form part of the critical national infrastructure. We cover the publication statistics of the research in this area, the aspects of security being addressed, and future work required to achieve better cyber-security for water systems