Adaptive runtime-assisted block prefetching on chip-multiprocessors

Memory stalls are a significant source of performance degradation in modern processors. Data prefetching is a widely adopted and well studied technique used to alleviate this problem. Prefetching can be performed by the hardware, or be initiated and controlled by software. Among software controlled prefetching we find a wide variety of schemes, including runtime-directed prefetching and more specifically runtime-directed block prefetching. This paper proposes a hybrid prefetching mechanism that integrates a software driven block prefetcher with existing hardware prefetching techniques. Our runtime-assisted software prefetcher brings large blocks of data on-chip with the support of a low cost hardware engine, and synergizes with existing hardware prefetchers that manage locality at a finer granularity. The runtime system that drives the prefetch engine dynamically selects which cache to prefetch to. Our evaluation on a set of scientific benchmarks obtains a maximum speed up of 32 and 10 % on average compared to a baseline with hardware prefetching only. As a result, we also achieve a reduction of up to 18 and 3 % on average in energy-to-solution.Peer ReviewedPostprint (author's final draft

Design and resource management of reconfigurable multiprocessors for data-parallel applications

FPGA (Field-Programmable Gate Array)-based custom reconfigurable computing machines have established themselves as low-cost and low-risk alternatives to ASIC (Application-Specific Integrated Circuit) implementations and general-purpose microprocessors in accelerating a wide range of computation-intensive applications. Most often they are Application Specific Programmable Circuiits (ASPCs), which are developer programmable instead of user programmable. The major disadvantages of ASPCs are minimal programmability, and significant time and energy overheads caused by required hardware reconfiguration when the problem size outnumbers the available reconfigurable resources; these problems are expected to become more serious with increases in the FPGA chip size. On the other hand, dominant high-performance computing systems, such as PC clusters and SMPs (Symmetric Multiprocessors), suffer from high communication latencies and/or scalability problems. This research introduces low-cost, user-programmable and reconfigurable MultiProcessor-on-a-Programmable-Chip (MPoPC) systems for high-performance, low-cost computing. It also proposes a relevant resource management framework that deals with performance, power consumption and energy issues. These semi-customized systems reduce significantly runtime device reconfiguration by employing userprogrammable processing elements that are reusable for different tasks in large, complex applications. For the sake of illustration, two different types of MPoPCs with hardware FPUs (floating-point units) are designed and implemented for credible performance evaluation and modeling: the coarse-grain MIMD (Multiple-Instruction, Multiple-Data) CG-MPoPC machine based on a processor IP (Intellectual Property) core and the mixed-mode (MIMD, SIMD or M-SIMD) variant-grain HERA (HEterogeneous Reconfigurable Architecture) machine. In addition to alleviating the above difficulties, MPoPCs can offer several performance and energy advantages to our data-parallel applications when compared to ASPCs; they are simpler and more scalable, and have less verification time and cost. Various common computation-intensive benchmark algorithms, such as matrix-matrix multiplication (MMM) and LU factorization, are studied and their parallel solutions are shown for the two MPoPCs. The performance is evaluated with large sparse real-world matrices primarily from power engineering. We expect even further performance gains on MPoPCs in the near future by employing ever improving FPGAs. The innovative nature of this work has the potential to guide research in this arising field of high-performance, low-cost reconfigurable computing. The largest advantage of reconfigurable logic lies in its large degree of hardware customization and reconfiguration which allows reusing the resources to match the computation and communication needs of applications. Therefore, a major effort in the presented design methodology for mixed-mode MPoPCs, like HERA, is devoted to effective resource management. A two-phase approach is applied. A mixed-mode weighted Task Flow Graph (w-TFG) is first constructed for any given application, where tasks are classified according to their most appropriate computing mode (e.g., SIMD or MIMD). At compile time, an architecture is customized and synthesized for the TFG using an Integer Linear Programming (ILP) formulation and a parameterized hardware component library. Various run-time scheduling schemes with different performanceenergy objectives are proposed. A system-level energy model for HERA, which is based on low-level implementation data and run-time statistics, is proposed to guide performance-energy trade-off decisions. A parallel power flow analysis technique based on Newton\u27s method is proposed and employed to verify the methodology

Towards a field configurable non-homogeneous multiprocessors architecture

Standard microprocessors are generally designed to deal efficiently with different types of tasks; their general purpose architecture can lead to misuse of resources, creating a large gap between the computational efficiency of microprocessors and custom silicon. The ever increasing complexity of Field Programmable Logic devices is driving the industry to look for innovative System on a Chip solutions; using programmable logic, the whole design can be tuned to the application requirements. In this paper, under the acronym MPOC (Multiprocessors On a Chip) we propose some applicable ideas on multiprocessing embedded configurable architectures, targeting System on a Programmable Chip (SOPC) cost-effective designs. Using heterogeneous medium or low performance soft-core processors instead of a single high performance processor, and some standardized communication schemes to link these multiple processors, the “best” core can be chosen for each subtask using a computational efficiency criteria, and therefore improving silicon usage. System-level design is also considered: models of tasks and links, parameterized soft-core processors, and the use of a standard HDL for system description can lead to automatic generation of the final design

Mapping and Scheduling of Directed Acyclic Graphs on An FPFA Tile

An architecture for a hand-held multimedia device requires components that are energy-efficient, flexible, and provide high performance. In the CHAMELEON [4] project we develop a coarse grained reconfigurable device for DSP-like algorithms, the so-called Field Programmable Function Array (FPFA). The FPFA devices are reminiscent to FPGAs, but with a matrix of Processing Parts (PP) instead of CLBs. The design of the FPFA focuses on: (1) Keeping each PP small to maximize the number of PPs that can fit on a chip; (2) providing sufficient flexibility; (3) Low energy consumption; (4) Exploiting the maximum amount of parallelism; (5) A strong support tool for FPFA-based applications. The challenge in providing compiler support for the FPFA-based design stems from the flexibility of the FPFA structure. If we do not use the characteristics of the FPFA structure properly, the advantages of an FPFA may become its disadvantages. The GECKO1project focuses on this problem. In this paper, we present a mapping and scheduling scheme for applications running on one FPFA tile. Applications are written in C and C code is translated to a Directed Acyclic Graphs (DAG) [4]. This scheme can map a DAG directly onto the reconfigurable PPs of an FPFA tile. It tries to achieve low power consumption by exploiting locality of reference and high performance by exploiting maximum parallelism

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations

The Chameleon Architecture for Streaming DSP Applications

We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm$^2$ in a 130 nm process), is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC) via a network interface (NI). Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT) and best effort (BE). For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool

From Parallel Programs to Customized Parallel Processors

The need for fast time to market of new embedded processor-based designs calls for a rapid design methodology of the included processors. The call for such a methodology is even more emphasized in the context of so called soft cores targeted to reconfigurable fabrics where per-design processor customization is commonplace. The C language has been commonly used as an input to hardware/software co-design flows. However, as C is a sequential language, its potential to generate parallel operations to utilize naturally parallel hardware constructs is far from optimal, leading to a customized processor design space with limited parallel resource scalability. In contrast, when utilizing a parallel programming language as an input, a wider processor design space can be explored to produce customized processors with varying degrees of utilized parallelism. This Thesis proposes a novel Multicore Application-Specific Instruction Set Processor (MCASIP) co-design methodology that exploits parallel programming languages as the application input format. In the methodology, the designer can explicitly capture the parallelism of the algorithm and exploit specialized instructions using a parallel programming language in contrast to being on the mercy of the compiler or the hardware to extract the parallelism from a sequential input. The Thesis proposes a multicore processor template based on the Transport Triggered Architecture, compiler techniques involved in static parallelization of computation kernels with barriers and a datapath integrated hardware accelerator for low overhead software synchronization implementation. These contributions enable scaling the customized processors both at the instruction and task levels to efficiently exploit the parallelism in the input program up to the implementation constraints such as the memory bandwidth or the chip area. The different contributions are validated with case studies, comparisons and design examples