Strategic Optimization Techniques For FRTU Deployment and Chip Physical Design

Combinatorial optimization is a complex engineering subject. Although formulation often depends on the nature of problems that differs from their setup, design, constraints, and implications, establishing a unifying framework is essential. This dissertation investigates the unique features of three important optimization problems that can span from small-scale design automation to large-scale power system planning: (1) Feeder remote terminal unit (FRTU) planning strategy by considering the cybersecurity of secondary distribution network in electrical distribution grid, (2) physical-level synthesis for microfluidic lab-on-a-chip, and (3) discrete gate sizing in very-large-scale integration (VLSI) circuit. First, an optimization technique by cross entropy is proposed to handle FRTU deployment in primary network considering cybersecurity of secondary distribution network. While it is constrained by monetary budget on the number of deployed FRTUs, the proposed algorithm identi?es pivotal locations of a distribution feeder to install the FRTUs in different time horizons. Then, multi-scale optimization techniques are proposed for digital micro?uidic lab-on-a-chip physical level synthesis. The proposed techniques handle the variation-aware lab-on-a-chip placement and routing co-design while satisfying all constraints, and considering contamination and defect. Last, the first fully polynomial time approximation scheme (FPTAS) is proposed for the delay driven discrete gate sizing problem, which explores the theoretical view since the existing works are heuristics with no performance guarantee. The intellectual contribution of the proposed methods establishes a novel paradigm bridging the gaps between professional communities

Performance and power optimization in VLSI physical design

As VLSI technology enters the nanoscale regime, a great amount of efforts have been made to reduce interconnect delay. Among them, buffer insertion stands out as an effective technique for timing optimization. A dramatic rise in on-chip buffer density has been witnessed. For example, in two recent IBM ASIC designs, 25% gates are buffers. In this thesis, three buffer insertion algorithms are presented for the procedure of performance and power optimization. The second chapter focuses on improving circuit performance under inductance effect. The new algorithm works under the dynamic programming framework and runs in provably linear time for multiple buffer types due to two novel techniques: restrictive cost bucketing and efficient delay update. The experimental results demonstrate that our linear time algorithm consistently outperforms all known RLC buffering algorithms in terms of both solution quality and runtime. That is, the new algorithm uses fewer buffers, runs in shorter time and the buffered tree has better timing. The third chapter presents a method to guarantee a high fidelity signal transmission in global bus. It proposes a new redundant via insertion technique to reduce via variation and signal distortion in twisted differential line. In addition, a new buffer insertion technique is proposed to synchronize the transmitted signals, thus further improving the effectiveness of the twisted differential line. Experimental results demonstrate a 6GHz signal can be transmitted with high fidelity using the new approaches. In contrast, only a 100MHz signal can be reliably transmitted using a single-end bus with power/ground shielding. Compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45% as witnessed in our simulation. The fourth chapter proposes a buffer insertion and gate sizing algorithm for million plus gates. The algorithm takes a combinational circuit as input instead of individual nets and greatly reduces the buffer and gate cost of the entire circuit. The algorithm has two main features: 1) A circuit partition technique based on the criticality of the primary inputs, which provides the scalability for the algorithm, and 2) A linear programming formulation of non-linear delay versus cost tradeoff, which formulates the simultaneous buffer insertion and gate sizing into linear programming problem. Experimental results on ISCAS85 circuits show that even without the circuit partition technique, the new algorithm achieves 17X speedup compared with path based algorithm. In the meantime, the new algorithm saves 16.0% buffer cost, 4.9% gate cost, 5.8% total cost and results in less circuit delay

High-performance Global Routing for Trillion-gate Systems-on-Chips.

Due to aggressive transistor scaling, modern-day CMOS circuits have continually increased in both complexity and productivity. Modern semiconductor designs have narrower and more resistive wires, thereby shifting the performance bottleneck to interconnect delay. These trends considerably impact timing closure and call for improvements in high-performance physical design tools to keep pace with the current state of IC innovation. As leading-edge designs may incorporate tens of millions of gates, algorithm and software scalability are crucial to achieving reasonable turnaround time. Moreover, with decreasing device sizes, optimizing traditional objectives is no longer sufficient. Our research focuses on (i) expanding the capabilities of standalone global routing, (ii) extending global routing for use in different design applications, and (iii) integrating routing within broader physical design optimizations and flows, e.g., congestion-driven placement. Our first global router relies on integer-linear programming (ILP), and can solve fairly large problem instances to optimality. Our second iterative global router relies on Lagrangian relaxation, where we relax the routing violation constraints to allowing routing overflow at a penalty. In both approaches, our desire is to give the router the maximum degree of freedom within a specified context. Empirically, both routers produce competitive results within a reasonable amount of runtime. To improve routability, we explore the incorporation of routing with placement, where the router estimates congestion and feeds this information to the placer. In turn, the emphasis on runtime is heightened, as the router will be invoked multiple times. Empirically, our placement-and-route framework significantly improves the final solution’s routability than performing the steps sequentially. To further enhance routability-driven placement, we (i) leverage incrementality to generate fast and accurate congestion maps, and (ii) develop several techniques to relieve cell-based and layout-based congestion. To broaden the scope of routing, we integrate a global router in a chip-design flow that addresses the buffer explosion problem.PHDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/98025/1/jinhu_1.pd

Layout optimization in ultra deep submicron VLSI design

As fabrication technology keeps advancing, many deep submicron (DSM) effects have become increasingly evident and can no longer be ignored in Very Large Scale Integration (VLSI) design. In this dissertation, we study several deep submicron problems (eg. coupling capacitance, antenna effect and delay variation) and propose optimization techniques to mitigate these DSM effects in the place-and-route stage of VLSI physical design. The place-and-route stage of physical design can be further divided into several steps: (1) Placement, (2) Global routing, (3) Layer assignment, (4) Track assignment, and (5) Detailed routing. Among them, layer/track assignment assigns major trunks of wire segments to specific layers/tracks in order to guide the underlying detailed router. In this dissertation, we have proposed techniques to handle coupling capacitance at the layer/track assignment stage, antenna effect at the layer assignment, and delay variation at the ECO (Engineering Change Order) placement stage, respectively. More specifically, at layer assignment, we have proposed an improved probabilistic model to quickly estimate the amount of coupling capacitance for timing optimization. Antenna effects are also handled at layer assignment through a linear-time tree partitioning algorithm. At the track assignment stage, timing is further optimized using a graph based technique. In addition, we have proposed a novel gate splitting methodology to reduce delay variation in the ECO placement considering spatial correlations. Experimental results on benchmark circuits showed the effectiveness of our approaches

A Multiple-objective ILP based Global Routing Approach for VLSI ASIC Design

A VLSI chip can today contain hundreds of millions transistors and is expected to contain more than 1 billion transistors in the next decade. In order to handle this rapid growth in integration technology, the design procedure is therefore divided into a sequence of design steps. Circuit layout is the design step in which a physical realization of a circuit is obtained from its functional description. Global routing is one of the key subproblems of the circuit layout which involves finding an approximate path for the wires connecting the elements of the circuit without violating resource constraints. The global routing problem is NP-hard, therefore, heuristics capable of producing high quality routes with little computational effort are required as we move into the Deep Sub-Micron (DSM) regime. In this thesis, different approaches for global routing problem are first reviewed. The advantages and disadvantages of these approaches are also summarized. According to this literature review, several mathematical programming based global routing models are fully investigated. Quality of solution obtained by these models are then compared with traditional Maze routing technique. The experimental results show that the proposed model can optimize several global routing objectives simultaneously and effectively. Also, it is easy to incorporate new objectives into the proposed global routing model. To speedup the computation time of the proposed ILP based global router, several hierarchical methods are combined with the flat ILP based global routing approach. The experimental results indicate that the bottom-up global routing method can reduce the computation time effectively with a slight increase of maximum routing density. In addition to wire area, routability, and vias, performance and low power are also important goals in global routing, especially in deep submicron designs. Previous efforts that focused on power optimization for global routing are hindered by excessively long run times or the routing of a subset of the nets. Accordingly, a power efficient multi-pin global routing technique (PIRT) is proposed in this thesis. This integer linear programming based techniques strives to find a power efficient global routing solution. The results indicate that an average power savings as high as 32\% for the 130-nm technology can be achieved with no impact on the maximum chip frequency

Analog layout design automation: ILP-based analog routers

The shrinking design window and high parasitic sensitivity in the advanced technology have imposed special challenges on the analog and radio frequency (RF) integrated circuit design. In this thesis, we propose a new methodology to address such a deficiency based on integer linear programming (ILP) but without compromising the capability of handling any special constraints for the analog routing problems. Distinct from the conventional methods, our algorithm utilizes adaptive resolutions for various routing regions. For a more congested region, a routing grid with higher resolution is employed, whereas a lower-resolution grid is adopted to a less crowded routing region. Moreover, we strengthen its speciality in handling interconnect width control so as to route the electrical nets based on analog constraints while considering proper interconnect width to address the acute interconnect parasitics, mismatch minimization, and electromigration effects simultaneously. In addition, to tackle the performance degradation due to layout dependent effects (LDEs) and take advantage of optical proximity correction (OPC) for resolution enhancement of subwavelength lithography, in this thesis we have also proposed an innovative LDE-aware analog layout migration scheme, which is equipped with our special routing methodology. The LDE constraints are first identified with aid of a special sensitivity analysis and then satisfied during the layout migration process. Afterwards the electrical nets are routed by an extended OPC-inclusive ILP-based analog router to improve the final layout image fidelity while the routability and analog constraints are respected in the meantime. The experimental results demonstrate the effectiveness and efficiency of our proposed methods in terms of both circuit performance and image quality compared to the previous works

High-Performance Placement and Routing for the Nanometer Scale.

Modern semiconductor manufacturing facilitates single-chip electronic systems that only five years ago required ten to twenty chips. Naturally, design complexity has grown within this period. In contrast to this growth, it is becoming common in the industry to limit design team size which places a heavier burden on design automation tools. Our work identifies new objectives, constraints and concerns in the physical design of systems-on-chip, and develops new computational techniques to address them. In addition to faster and more relevant design optimizations, we demonstrate that traditional design flows based on ``separation of concerns'' produce unnecessarily suboptimal layouts. We develop new integrated optimizations that streamline traditional chains of loosely-linked design tools. In particular, we bridge the gap between mixed-size placement and routing by updating the objective of global and detail placement to a more accurate estimate of routed wirelength. To this we add sophisticated whitespace allocation, and the combination provides increased routability, faster routing, shorter routed wirelength, and the best via counts of published techniques. To further improve post-routing design metrics, we present new global routing techniques based on Discrete Lagrange Multipliers (DLM) which produce the best routed wirelength results on recent benchmarks. Our work culminates in the integration of our routing techniques within an incremental placement flow to improve detailed routing solutions, shrink die sizes and reduce total chip cost. Not only do our techniques improve the quality and cost of designs, but also simplify design automation software implementation in many cases. Ultimately, we reduce the time needed for design closure through improved tool fidelity and the use of our incremental techniques for placement and routing.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/64639/1/royj_1.pd

Techniques de routage pseudo-aléatoire pour une application micro-électronique

Résumé La problématique de routage est très actuelle. On en trouve des applications dans les GPS, les prévisions de trafic routier, mais aussi pour le prototypage sur FPGA, la fabrication de puces électroniques ou le trafic TCP/IP sur Internet. On trouve des publications sur le sujet depuis plusieurs dizaines d'années, mais on observe actuellement une recrudescence confirmant l'actualité, l'importance et la complexité de ce problème. Cette thèse concerne le routage et ses ressources pour une application dans un nouveau type de système micro-électronique, nommé le WaferBoardTM . Son noyau consiste en un circuit électronique intégré à l'échelle d'une tranche de silicium (wafer). Peu d'applications commerciales de la micro-électronique ont exploité ce niveau d'intégration. Ce système de prototypage rapide vise à réduire d'un ou deux ordres de grandeur le temps de développement de systèmes électroniques. Il nécessite un ensemble d'outils logiciel de support, dont un outil de routage très rapide, capable de produire des solutions valables en des temps de l'ordre de la minute, et de certaines fonctionnalités spécifiques, l'équilibrage de délai ou le reroutage à la volée, au sein d'une netlist déjà routée. La problématique de routage pour cette application peut être imagée comme suit. Étant donné un réseau routier régulier (les routes d’Amériques du Nord en version cartésienne par exemple) et 100,000 voitures au départ lundi à 8h a.m. dans tout le pays avec des sources et destinations très variées; calculer les chemins pour toutes les voitures de telle sorte qu'aucune ne prenne la même route dans la journée. Il est 7h59 a.m, vous avez 1 minute, et des ponts sont inaccessibles pour travaux, en voici la liste. Cet exemple simpliste donne une idée des ordres de grandeurs de la problématique de routage que l'on cherche à résoudre pour cette application. Un algorithme de routage prend en paramètres deux structures de données : un graphe (ou réseau d'interconnexions) constitué de n\oe{}uds (sommets) et d'arcsUn arc relie deux sommets du graphe, et une netlistDans ce contexte, un netlist réfère à une liste d'interconnexions entre composants, liste de n\oe{}uds électriques dont les points de départ et d'arrivée sont positionnés géographiquement. Ainsi, au lieu de voitures, il s'agit de router des signaux électriques dont les points de départ et d'arrivée sont dictés par la position des broches des composants placés sur le système de prototypage. Un réseau régulier maillé mufti-dimensionnel (plus généralement appelé « réseau d'interconnexions ») sert de réseau routier dont certaines routes sont défectueuses, des ponts inaccessibles. En effet, le réseau d'interconnexions est un circuit électronique intégré à l'échelle d'une tranche de silicium complète, ce qui implique la présence de défectuosités au sein de chaque circuit fabriqué. Contrairement aux circuits électroniques classiques, où chacun est testé et les défectueux écartés, une intégration à l'échelle de la tranche demande de fortes redondances au sein du circuit pour minimiser le taux de rejets. Pour l'application du WaferBoard, un certain nombre d'éléments du réseau d'interconnexions seront fort probablement défectueux sur chaque circuit produit; l'algorithme de routage se doit de prendre en compte ces éléments très particuliers. Cette contrainte ne se retrouve pas dans les applications plus classiques des routeurs que l'on retrouve dans les PCB, circuits FPGA ou circuits VLSI. D'autres contraintes s'appliquent à ce projet particulier : la latence induite par la technologie est environ un ordre de grandeur plus importante que celle dans les circuits sur PCB, ce qui impose un routage orienté vers sa réduction.----------Abstract The routing problem is very actual. Applications are found in GPS, road traffic forecast, but also for prototyping on FPGA, or TCP/IP traffic on the Internet. Publications on the subject have existed for several decades, but new publications keep appearing, confirming the importance and complexity of the problem. This thesis deals with routing and the resources it requires for a new category of micro-electronic applications, called the WaferBoard. It is an electronic circuit integrated at the wafer scale. Few commercial applications of micro-electronics have exploited this level of integration. This rapid prototyping system aims at reducing by one or two orders of magnitude the development time of digital circuits. It requires a very fast routing tool, capable of producing viable solutions in a few minutes, with dedicated functionality such as balancing delays and rerouting on the fly parts of a netlist. The routing problem for this application can be pictured as follows. Given a regular road network of the size of north america, if 100.000 cars were to start Monday 8 a.m. across the continent with a wide variety of sources and destinations; the challenge is to compute paths for all cars so none of them take the same route that day. It is 7:59 am, you have 1 minute, and some bridges are under road work: here is the list. This simplistic example gives an idea of the orders of magnitude of the problem that need to be solved for this application. A routing algorithm takes as input: a graph (or interconnection network) made of nodes and edges, and a netlst, a list of electrical nodes with starting and ending points physically placed. Therefore, instead of cars, the problem consists of routing electrical signals with points of departure and arrival dictated by the pin position of components placed on the prototyping system. A regular, multi-dimensional mesh (also called "interconnection network") serves as a road network, which contains defective roads and inaccessible bridges. Indeed, the interconnection network is an electronic circuit integrated across a full wafer, implying the presence of defects within each manufactured circuit. Unlike conventional electronic circuits, where each is tested and defective ones are set apart, wafer scale integrated applications require lots of redundancy in the circuit to minimize the rejection rate. In the WaferBoard, a number of elements of the interconnection network will be defective in each circuit; the routing algorithm must take into account these very specific elements. This constraint is not found in the classic applications of routers found in PCB, FPGA or VLSI circuits. Other restrictions apply to this particular project: the latency induced by the technology is about one order of magnitude greater than that in the circuits of PCBs, which requires a routing oriented towards computation time reduction. This constraint partly explains the network architecture used. Within the WaferIC, the shortest distance is not necessarily the one that offers the smallest latency. This property of the network complexifies the routing problem. Balancing delays within a group of arbitrary size nets is a necessary feature of the routing algorithm, and the difficulty is amplified by the computation time limit. Indeed, the interest of the application is to reduce the time for a user to test a circuit: the time of setup is extremely short, and estimated at a few minutes only

Algorithms for the scaling toward nanometer VLSI physical synthesis

Along the history of Very Large Scale Integration (VLSI), we have successfully scaled down the size of transistors, scaled up the speed of integrated circuits (IC) and the number of transistors in a chip - these are just a few examples of our achievement in VLSI scaling. It is projected to enter the nanometer (timing estimation and buffer planning for global routing and other early stages such as floorplanning. A novel path based buffer insertion scheme is also included, which can overcome the weakness of the net based approaches. Part-2 Circuit clustering techniques with the application in Field-Programmable Gate Array (FPGA) technology mapping The problem of timing driven n-way circuit partitioning with application to FPGA technology mapping is studied and a hierarchical clustering approach is presented for the latest multi-level FPGA architectures. Moreover, a more general delay model is included in order to accurately characterize the delay behavior of the clusters and circuit elements