Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.Siirretty Doriast

Throughput-Centric Wave-Pipelined Interconnect Circuits for Gigascale Integration

The central thesis of this research is that VLSI interconnect design strategies should shift from using global wires that can support only a single binary transition during the latency of the line to global wires that can sustain multiple bits traveling simultaneously along the length of the line. It is shown in this thesis that such throughput-centric multibit transmission can be achieved by wave-pipelining the interconnects using repeaters. A holistic analysis of wave-pipelined interconnect circuits, along with the full-custom optimization of these circuits, is performed in this research. With the help of models and methodologies developed in this thesis, the design rules for repeater insertion are crafted to simultaneously optimize performance, power, and area of VLSI global interconnect networks through a simultaneous application of voltage scaling and wire sizing. A qualitative analysis of latency, throughput, signal integrity, power dissipation, and area is performed that compares the results of design optimizations in this work to those of conventional global interconnect circuits. The objective of this thesis is to study the circuit- and system-level opportunities of voltage scaling, wire sizing, and repeater insertion in wave-pipelined global interconnect networks that are implemented in deep submicron technologies.Ph.D.Committee Chair: Davis, Jeffrey; Committee Member: Kohl, Paul; Committee Member: Meindl, James; Committee Member: Swaminathan, Madhavan; Committee Member: Wills, D. Scot

High frequency signal integrity in high-density assemblies

The demand for faster, portable and reliable electronic devices is increasing the pressure on the development of assembly techniques for signal integrity (SI). The advance of integrated circuits toward a large number of Input/Output (I/Os), a high number of operations and up to microwave communication frequencies, is behind the drive for the search for new packaging solutions. The materials and assembly techniques have an important impact on the propagation of high speed signals. Signal integrity issues emerge due to the electrical losses of materials, reflections from impedance discontinuities in the signal path and fast transitions of the signals. For these reasons, signal integrity in lead-free connections of WLCSP, flip chip (FC) and Integrated Module Board (IMB) assemblies were investigated up to 50 GHz. The increase of conductor loss resulting from the presence of thick oxide layers on the surface of solder bumps of hot running components was experimentally studied for the first time. Utilizing theoretical calculations, a design rule was developed to account for the 40 % increase in losses due to the presence of oxide layers at high frequencies. The research into the influence of solder microstructure on signal quality showed that it did not negatively affect the wave propagation. Experimental results proved that the presence of underfills and high density routing on printed wiring boards (PWBs) under the WLCSP components, detuned the components and the connections. The effects of three different underfills on signal propagation were studied. It was proven that the changes resulting from the rheology and parameters of curing process influence the losses and reflections of circuits. The analysis of microwave performances of flip chip (FC) and Integrated Module Board (IMB) assembly techniques demonstrated that they are well suited to Radio frequency (RF) and high speed applications. Comparison showed that IMB performed better as the wave encountered smaller discontinuities and had an optimized propagation path. Full wave simulations of IMB assemblies were performed considering finite ground coplanar waveguide (FGCPW), microstrip and stripline connections with stack-ups that included high dielectric constant materials and four connection possibilities. The research was carried out in the domains of both frequency and time to rigorously determine the sources of signal reflections. The results emphasized that in the design for match impedance and optimal current return path, discontinuities and reference planes had significant impact on signal integrity

Signaling in 3-D integrated circuits, benefits and challenges

Three-dimensional (3-D) or vertical integration is a design and packaging paradigm that can mitigate many of the increasing challenges related to the design of modern integrated systems. 3-D circuits have recently been at the spotlight, since these circuits provide a potent approach to enhance the performance and integrate diverse functions within amulti-plane stack. Clock networks consume a great portion of the power dissipated in a circuit. Therefore, designing a low-power clock network in synchronous circuits is an important task. This requirement is stricter for 3-D circuits due to the increased power densities. Synchronization issues can be more challenging for 3-D circuits since a clock path can spread across several planes with different physical and electrical characteristics. Consequently, designing low power clock networks for 3-D circuits is an important issue. Resonant clock networks are considered efficient low-power alternatives to conventional clock distribution schemes. These networks utilize additional inductive circuits to reduce power while delivering a full swing clock signal to the sink nodes. In this research, a design method to apply resonant clocking to synthesized clock trees is proposed. Manufacturing processes for 3-D circuits include some additional steps as compared to standard CMOS processes which makes 3-D circuits more susceptible to manufacturing defects and lowers the overall yield of the bonded 3-D stack. Testing is another complicated task for 3-D ICs, where pre-bond test is a prerequisite. Pre-bond testability, in turn, presents new challenges to 3-D clock network design primarily due to the incomplete clock distribution networks prior to the bonding of the planes. A design methodology of resonant 3-D clock networks that support wireless pre-bond testing is introduced. To efficiently address this issue, inductive links are exploited to wirelessly transmit the clock signal to the disjoint resonant clock networks. The inductors comprising the LC tanks are used as the receiver circuit for the links, essentially eliminating the need for additional circuits and/or interconnect resources during pre-bond test. Recent FPGAs are quite complex circuits which provide reconfigurablity at the cost of lower performance and higher power consumption as compared to ASIC circuits. Exploiting a large number of programmable switches, routing structures are mainly responsible for performance degradation in FPAGs. Employing 3-D technology can providemore efficient switches which drastically improve the performance and reduce the power consumption of the FPGA. RRAM switches are one of the most promising candidates to improve the FPGA routing architecture thanks to their low on-resistance and non-volatility. Along with the configurable switches, buffers are the other important element of the FPGAs routing structure. Different characteristics of RRAM switches change the properties of signal paths in RRAM-based FPGAs. The on resistance of RRAMswitches is considerably lower than CMOS pass gate switches which results in lower RC delay for RRAM-based routing paths. This different nature in critical path and signal delay in turn affect the need for intermediate buffers. Thus the buffer allocation should be reconsidered. In the last part of this research, the effect of intermediate buffers on signal propagation delay is studied and a modified buffer allocation scheme for RRAM-based FPGA routing path is proposed

High-Speed and Low-Energy On-Chip Communication Circuits.

Continuous technology scaling sharply reduces transistor delays, while fixed-length global wire delays have increased due to less wiring pitch with higher resistance and coupling capacitance. Due to this ever growing gap, long on-chip interconnects pose well-known latency, bandwidth, and energy challenges to high-performance VLSI systems. Repeaters effectively mitigate wire RC effects but do little to improve their energy costs. Moreover, the increased complexity and high level of integration requires higher wire densities, worsening crosstalk noise and power consumption of conventionally repeated interconnects. Such increasing concerns in global on-chip wires motivate circuits to improve wire performance and energy while reducing the number of repeaters. This work presents circuit techniques and investigation for high-performance and energy-efficient on-chip communication in the aspects of encoding, data compression, self-timed current injection, signal pre-emphasis, low-swing signaling, and technology mapping. The improved bus designs also consider the constraints of robust operation and performance/energy gains across process corners and design space. Measurement results from 5mm links on 65nm and 90nm prototype chips validate 2.5-3X improvement in energy-delay product.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/75800/1/jseo_1.pd