Video QoS/QoE over IEEE802.11n/ac: A Contemporary Survey

The demand for video applications over wireless networks has tremendously increased, and IEEE 802.11 standards have provided higher support for video transmission. However, providing Quality of Service (QoS) and Quality of Experience (QoE) for video over WLAN is still a challenge due to the error sensitivity of compressed video and dynamic channels. This thesis presents a contemporary survey study on video QoS/QoE over WLAN issues and solutions. The objective of the study is to provide an overview of the issues by conducting a background study on the video codecs and their features and characteristics, followed by studying QoS and QoE support in IEEE 802.11 standards. Since IEEE 802.11n is the current standard that is mostly deployed worldwide and IEEE 802.11ac is the upcoming standard, this survey study aims to investigate the most recent video QoS/QoE solutions based on these two standards. The solutions are divided into two broad categories, academic solutions, and vendor solutions. Academic solutions are mostly based on three main layers, namely Application, Media Access Control (MAC) and Physical (PHY) which are further divided into two major categories, single-layer solutions, and cross-layer solutions. Single-layer solutions are those which focus on a single layer to enhance the video transmission performance over WLAN. Cross-layer solutions involve two or more layers to provide a single QoS solution for video over WLAN. This thesis has also presented and technically analyzed QoS solutions by three popular vendors. This thesis concludes that single-layer solutions are not directly related to video QoS/QoE, and cross-layer solutions are performing better than single-layer solutions, but they are much more complicated and not easy to be implemented. Most vendors rely on their network infrastructure to provide QoS for multimedia applications. They have their techniques and mechanisms, but the concept of providing QoS/QoE for video is almost the same because they are using the same standards and rely on Wi-Fi Multimedia (WMM) to provide QoS

A simulation study of video conferencing system over IEEE 802.11n Wireless LAN

Wireless local area network (WLAN) is the core of the classic wireless communications systems and owns the infrastructure which wide spreads in many regions in the world. IEEE 802.11n is an attractive standard of WLAN and offers a data capacity of the cell. This paper estimates the maximum limits of the IEEE 802.11n standard cell as a term of number of users which are successfully served by the cell in case of video conference application. The results shown that, the cell of 802.11n could serve about 9 users under the service of video conference in case of 20MHz channel bandwidth before congestion occurs while the 40MHz channel could support 18 users

Scalable and rate adaptive wireless multimedia multicast

The methods that are described in this work enable highly efficient audio-visual streaming over wireless digital communication systems to an arbitrary number of receivers. In the focus of this thesis is thus point-to-multipoint transmission at constrained end-to-end delay. A fundamental difference as compared to point-to-point connections between exactly two communicating sending and receiving stations is in conveying information about successful or unsuccessful packet reception at the receiver side. The information to be transmitted is available at the sender, whereas the information about successful reception is only available to the receiver. Therefore, feedback about reception from the receiver to the sender is necessary. This information may be used for simple packet repetition in case of error, or adaptation of the bit rate of transmission to the momentary bit rate capacity of the channel, or both. This work focuses on the single transmission (including retransmissions) of data from one source to multiple destinations at the same time. A comparison with multi-receiver sequentially redundant transmission systems (simulcast MIMO) is made. With respect to feedback, this work considers time division multiple access systems, in which a single channel is used for data transmission and feedback. Therefore, the amount of time that can be spent for transmitting feedback is limited. An increase in time used for feedback transmissions from potentially many receivers results in a decrease in residual time which is usable for data transmission. This has direct impact on data throughput and hence, the quality of service. In the literature, an approach to reduce feedback overhead which is based on simultaneous feedback exists. In the scope of this work, simultaneous feedback implies equal carrier frequency, bandwidth and signal shape, in this case orthogonal frequency-division multiplex signals, during the event of the herein termed feedback aggregation in time. For this scheme, a constant amount of time is spent for feedback, independent of the number of receivers giving feedback about reception. Therefore, also data throughput remains independent of the number of receivers. This property of audio-visual digital transmission is taken for granted for statically configured, single purpose systems, such as terrestrial television. In the scope of this work are, however, multi-user and multi-purpose digital communication networks. Wireless LANs are a well-known example and are covered in detail herein. In suchlike systems, it is of great importance to remain independent of the number of receivers, as otherwise the service of ubiquitous digital connectivity is at the risk of being degraded. In this regard, the thesis at hand elaborates at what bit rates audio-visual transmission to multiple receivers may take place in conjunction with feedback aggregation. It is shown that the scheme achieves a multi-user throughput gain when used in conjunction with adaptivity of the bit rate to the channel. An assumption is the use of an ideal overlay packet erasure correcting code in this case. Furthermore, for delay constrained transmission, such as in so-called live television, throughput bit rates are examined. Applications have to be tolerant to a certain level of residual error in case of delay constrained transmission. Improvement of the rate adaptation algorithm is shown to increase throughput while residual error rates are decreased. Finally, with a consumer hardware prototype for digital live-TV re-distribution in the local wireless network, most of the mechanisms as described herein can be demonstrated.Die in vorliegender Arbeit aufgezeigten Methoden der paketbasierten drahtlosen digitalen Kommunikation ermöglichen es, Fernsehinhalte, aber auch audio-visuelle Datenströme im Allgemeinen, bei hoher Effizienz an beliebig große Gruppen von Empfängern zu verteilen. Im Fokus dieser Arbeit steht damit die Punkt- zu Mehrpunktübertragung bei begrenzter Ende-zu-Ende Verzögerung. Ein grundlegender Unterschied zur Punkt-zu-Punkt Verbindung zwischen genau zwei miteinander kommunizierenden Sender- und Empfängerstationen liegt in der Übermittlung der Information über erfolgreichen oder nicht erfolgreichen Paketempfang auf Seite der Empfänger. Da die zu übertragende Information am Sender vorliegt, die Information über den Erfolg der Übertragung jedoch ausschließlich beim jeweiligen Empfänger, muss eine Erfolgsmeldung auf dem Rückweg von Empfänger zu Sender erfolgen. Diese Information wird dann zum Beispiel zur einfachen Paketwiederholung im nicht erfolgreichen Fall genutzt, oder aber um die Übertragungsrate an die Kapazität des Kanals anzupassen, oder beides. Grundsätzlich beschäftigt sich diese Arbeit mit der einmaligen, gleichzeitigen Übertragung von Information (einschließlich Wiederholungen) an mehrere Empfänger, wobei ein Vergleich zu an mehrere Empfänger sequentiell redundant übertragenden Systemen (Simulcast MIMO) angestellt wird. In dieser Arbeit ist die Betrachtung bezüglich eines Rückkanals auf Zeitduplexsysteme beschränkt. In diesen Systemen wird der Kanal für Hin- und Rückweg zeitlich orthogonalisiert. Damit steht für die Übermittlung der Erfolgsmeldung eine beschränkte Zeitdauer zur Verfügung. Je mehr an Kanalzugriffszeit für die Erfolgsmeldungen der potentiell vielen Empfänger verbraucht wird, desto geringer wird die Restzeit, in der dann entsprechend weniger audio-visuelle Nutzdaten übertragbar sind, was sich direkt auf die Dienstqualität auswirkt. Ein in der Literatur weniger ausführlich betrachteter Ansatz ist die gleichzeitige Übertragung von Rückmeldungen mehrerer Teilnehmer auf gleicher Frequenz und bei identischer Bandbreite, sowie unter Nutzung gleichartiger Signale (hier: orthogonale Frequenzmultiplexsignalformung). Das Schema wird in dieser Arbeit daher als zeitliche Aggregation von Rückmeldungen, engl. feedback aggregation, bezeichnet. Dabei wird, unabhängig von der Anzahl der Empfänger, eine konstante Zeitdauer für Rückmeldungen genutzt, womit auch der Datendurchsatz durch zusätzliche Empfänger nicht notwendigerweise sinkt. Diese Eigenschaft ist aus statisch konfigurierten und für einen einzigen Zweck konzipierten Systemen, wie z. B. der terrestrischen Fernsehübertragung, bekannt. In dieser Arbeit werden im Gegensatz dazu jedoch am Beispiel von WLAN Mehrzweck- und Mehrbenutzersysteme betrachtet. Es handelt sich in derartigen Systemen zur digitalen Datenübertragung dabei um einen entscheidenden Vorteil, unabhängig von der Empfängeranzahl zu bleiben, da es sonst unweigerlich zu Einschränkungen in der Güte der angebotenen Dienstleistung der allgegenwärtigen digitalen Vernetzung kommen muss. Vorliegende Arbeit zeigt in diesem Zusammenhang auf, welche Datenraten unter Benutzung von feedback aggregation in der Verteilung an mehrere Empfänger und in verschiedenen Szenarien zu erreichen sind. Hierbei zeigt sich, dass das Schema im Zusammenspiel mit einer Adaption der Datenrate an den Übertragungskanal inhärent einen Datenratengewinn durch Mehrbenutzerempfang zu erzielen vermag, wenn ein überlagerter idealer Paketauslöschungsschutz-Code angenommen wird. Des weiteren wird bei der Übertragung mit zeitlich begrenzter Ausführungsdauer, z. B. dem sogenannten Live-Fernsehen, aufgezeigt, wie sich die erreichbare Datenrate reduziert und welche Restfehlertoleranz an die Übertragung gestellt werden muss. Hierbei wird ebenso aufgezeigt, wie sich durch Verbesserung der Ratenadaption erstere erhöhen und zweitere verringern lässt. An einem auf handelsüblichen Computer-Systemen realisiertem Prototypen zur Live-Fernsehübertragung können die hierin beschriebenen Mechanismen zu großen Teilen gezeigt werden

Coding in 802.11 WLANs

Forward error correction (FEC) coding is widely used in communication systems to correct transmis- sion errors. In IEEE 802.11a/g transmitters, convolutional codes are used for FEC at the physical (PHY) layer. As is typical in wireless systems, only a limited choice of pre-speci¯ed coding rates is supported. These are implemented in hardware and thus di±cult to change, and the coding rates are selected with point to point operation in mind. This thesis is concerned with using FEC coding in 802.11 WLANs in more interesting ways that are better aligned with application requirements. For example, coding to support multicast tra±c rather than simple point to point tra±c; coding that is cognisant of the multiuser nature of the wireless channel; and coding which takes account of delay requirements as well as losses. We consider layering additional coding on top of the existing 802.11 PHY layer coding, and investigate the tradeo® between higher layer coding and PHY layer modulation and FEC coding as well as MAC layer scheduling. Firstly we consider the joint multicast performance of higher-layer fountain coding concatenated with 802.11a/g OFDM PHY modulation/coding. A study on the optimal choice of PHY rates with and without fountain coding is carried out for standard 802.11 WLANs. We ¯nd that, in contrast to studies in cellular networks, in 802.11a/g WLANs the PHY rate that optimizes uncoded multicast performance is also close to optimal for fountain-coded multicast tra±c. This indicates that in 802.11a/g WLANs cross-layer rate control for higher-layer fountain coding concatenated with physical layer modulation and FEC would bring few bene¯ts. Secondly, using experimental measurements taken in an outdoor environment, we model the chan- nel provided by outdoor 802.11 links as a hybrid binary symmetric/packet erasure channel. This hybrid channel o®ers capacity increases of more than 100% compared to a conventional packet erasure channel (PEC) over a wide range of RSSIs. Based upon the established channel model, we further consider the potential performance gains of adopting a binary symmetric channel (BSC) paradigm for multi-destination aggregations in 802.11 WLANs. We consider two BSC-based higher-layer coding approaches, i.e. superposition coding and a simpler time-sharing coding, for multi-destination aggre- gated packets. The performance results for both unicast and multicast tra±c, taking account of MAC layer overheads, demonstrate that increases in network throughput of more than 100% are possible over a wide range of channel conditions, and that the simpler time-sharing approach yields most of these gains and have minor loss of performance. Finally, we consider the proportional fair allocation of high-layer coding rates and airtimes in 802.11 WLANs, taking link losses and delay constraints into account. We ¯nd that a layered approach of separating MAC scheduling and higher-layer coding rate selection is optimal. The proportional fair coding rate and airtime allocation (i) assigns equal total airtime (i.e. airtime including both successful and failed transmissions) to every station in a WLAN, (ii) the station airtimes sum to unity (ensuring operation at the rate region boundary), and (iii) the optimal coding rate is selected to maximise goodput (treating packets decoded after the delay deadline as losses)

무선랜 비디오 멀티캐스트의 문제 발견 및 성능 향상 기법

학위논문 (박사)-- 서울대학교 대학원 공과대학 전기·컴퓨터공학부, 2017. 8. 최성현.Video multicast, streaming real-time videos via multicast, over wireless local area network (WLAN) has been considered a promising solution to share common venue-specific videos. By virtue of the nature of the wireless broadcast medium, video multicast basically enables scale-free video delivery, i.e., it can deliver a common video with the fixed amount of wireless resource regardless of the number of receivers. However, video multicast has not been widely enjoyed in our lives due to three major challenges: (1) power saving-related problem, (2) low reliability and efficiency, and (3) limited coverage. In this dissertation, we consider three research topics, i.e., (1) identification of practical issues with multicast power saving, (2) physical (PHY) rate and forward erasure correction code (FEC) rate adaptation over a single-hop network, and (3) multi-hop multicast, which deal with the three major challenges, respectively. Firstly, video multicast needs to be reliably delivered to power-saving stations, given that many portable devices are battery-powered. Accordingly, we investigate the impact of multicast power saving, and address two practical issues related with the multicast power saving. From the measurement with several commercial WLAN devices, we observe that many devices are not standard compliant, thus making video multicast performance severely degraded. We categorize such standard incompliant malfunctions that can result in significant packet losses. We also figure out a coexistence problem between video multicast and voice over Internet protocol (VoIP) when video receivers runs in power saving mode (PSM). The standard-compliant power save delivery of multicast deteriorates the VoIP performance in the same WLAN. We analyze the VoIP packet losses due to the coexistence problem, and propose a new power save delivery scheme to resolve the problem. We further implement the proposed scheme with an open source device driver, and our measurement results demonstrate that the proposed scheme significantly enhances the VoIP performance without sacrificing the video multicast performance. Second, multi-PHY rate FEC-applied wireless multicast enables reliable and efficient video multicast with intelligent selection of PHY rate and FEC rate. The optimal PHY/FEC rates depend on the cause of the packet losses. However, previous approaches select the PHY/FEC rates by considering only channel errors even when interference is also a major source of packet losses.We propose InFRA, an interference-aware PHY/FEC rate adaptation framework that (1) infers the cause of the packet losses based on received signal strength indicator (RSSI) and cyclic redundancy check (CRC) error notifications, and (2) determines the PHY/FEC rates based on the cause of packet losses. Our prototype implementation with off-the-shelf chipsets demonstrates that InFRA enhances the multicast delivery under various network scenarios. InFRA enables 2.3x and 1.8x more nodes to achieve a target video packet loss rate with a contention interferer and a hidden interferer, respectively, compared with the state-of-theart PHY/FEC rate adaptation scheme. To the best of our knowledge, InFRA is the first work to take the impact of interference into account for the PHY/FEC rate adaptation. Finally, collaborative relaying that enables selected receiver nodes to relay the received packets from source node to other nodes enhances service coverage, reliability, and efficiency of video multicast. The intelligent selection of sender nodes (source and relays) and their transmission parameters (PHY rate and the number of packets to send) is the key to optimize the performance. We propose EV-CAST, an interference and energy-aware video multicast system using collaborative relays, which entails online network management based on interference-aware link characterization, an algorithm for joint determination of sender nodes and transmission parameters, and polling-based relay protocol. In order to select most appropriate set of the relay nodes, EV-CAST considers interference, battery status, and spatial reuse, as well as other factors accumulated over last decades. Our prototype-based measurement results demonstrate that EV-CAST outperforms the state-of-the-art video multicast schemes. In summary, from Chapter 2 to Chapter 4, the aforementioned three pieces of the research work, i.e., identification of power saving-related practical issues, InFRA for interference-resilient single-hop multicast, and EV-CAST for efficient multi-hop multicast, will be presented, respectively.1 Introduction 1 1.1 Video Multicast over WLAN 1 1.2 Overview of Existing Approaches 4 1.2.1 Multicast Power Saving 4 1.2.2 Reliability and Efficiency Enhancement 4 1.2.3 Coverage Extension 5 1.3 Main Contributions 7 1.3.1 Practical Issues with Multicast Power Saving 7 1.3.2 Interference-aware PHY/FEC Rate Adaptation 8 1.3.3 Energy-aware Multi-hop Multicast 9 1.4 Organization of the Dissertation 10 2 Practical Issues with Multicast Power Saving 12 2.1 Introduction 12 2.2 Multicast & Power Management Operation in IEEE 802.11 14 2.3 Inter-operability Issue 15 2.3.1 Malfunctions of Commercial WLAN Devices 17 2.3.2 Performance Evaluation 20 2.4 Coexistence Problem of Video Multicast and VoIP 21 2.4.1 Problem Statement 21 2.4.2 Problem Identification: A Measurement Study 23 2.4.3 Packet Loss Analysis 27 2.4.4 Proposed Scheme 32 2.4.5 Performance Evaluation 33 2.5 Summary 37 3 InFRA: Interference-Aware PHY/FEC Rate Adaptation for Video Multicast over WLAN 39 3.1 Introduction 39 3.2 Related Work 42 3.2.1 Reliable Multicast Protocol 42 3.2.2 PHY/FEC rate adaptation for multicast service 44 3.2.3 Wireless Video Transmission 45 3.2.4 Wireless Loss Differentiation 46 3.3 Impact of Interference on Multi-rate FEC-applied Multicast 46 3.3.1 Measurement Setup 47 3.3.2 Measurement Results 47 3.4 InFRA: Interference-aware PHY/FEC Rate Adaptation Framework 49 3.4.1 Network Model and Objective 49 3.4.2 Overall Architecture 50 3.4.3 FEC Scheme 52 3.4.4 STA-side Operation 53 3.4.5 AP-side Operation 61 3.4.6 Practical Issues 62 3.5 Performance Evaluation 65 3.5.1 Measurement Setup 66 3.5.2 Small Scale Evaluation 67 3.5.3 Large Scale Evaluation 70 3.6 Summary 74 4 EV-CAST: Interference and Energy-aware Video Multicast Exploiting Collaborative Relays 75 4.1 Introduction 75 4.2 Factors for Sender Node and Transmission Parameter Selection 78 4.3 EV-CAST: Interference and Energy-aware Multicast Exploiting Collaborative Relays 80 4.3.1 Network Model and Objective 80 4.3.2 Overview 81 4.3.3 Network Management 81 4.3.4 Interference and Energy-aware Sender Nodes and Transmission Parameter Selection (INFER) Algorithm 87 4.3.5 Assignment, Polling, and Re-selection of Relays 93 4.3.6 Discussion 95 4.4 Evaluation 96 4.4.1 Measurement Setup 96 4.4.2 Micro-benchmark 98 4.4.3 Macro-benchmark 103 4.5 Related Work 105 4.5.1 Multicast Opportunistic Routing 105 4.5.2 Multicast over WLAN 106 4.6 Summary 106 5 Conclusion 108 5.1 Research Contributions 108 5.2 Future Research Directions 109 Abstract (In Korean) 121Docto

Analysis and evaluation of in-home networks based on HomePlug-AV power line communications

[ESP] No hace mucho tiempo, las redes in-home (también denominadas redes domésticas) únicamente se utilizaban para interconectar los diferentes ordenadores de una vivienda, de manera que pudieran compartir una impresora entre ellos. Hoy en día, sin embargo, esta definición es mucho más amplia debido a la gran cantidad de dispositivos existentes en la vivienda con capacidad de conectarse a una red para transmitir y recibir información. En una red in-home actual, podemos encontrar desde teléfonos móviles equipados con conectividad WI-FI a dispositivos NAS (Network Attached Storage), utilizados para almacenar información, imágenes o videos en red, que a su vez pueden ser transferidos a televisiones de alta definición u ordenadores. A la hora de instalar una red de comunicaciones en una vivienda, se persiguen principalmente dos objetivos, reducir el coste de instalación y conseguir una gran flexibilidad de cara a futuras ampliaciones. Una red basada en tecnología PLC (Power Line Communications) cumple estos requisitos ya que, al utilizar la infraestructura de cableado eléctrico existente en la vivienda, es muy sencilla y económica de instalar y ampliar. Dentro de la tecnología PLC existen diferentes estándares, siendo HomePlug-AV (HomePlug Audio-Video o simplemente HPAV) el más extendido en la actualidad para la instalación de redes domésticas. Este estándar permite alcanzar velocidades de transmisión de hasta 200Mbps a través de los cables de baja tensión de una vivienda convencional. El objetivo principal de esta tesis doctoral es aportar nuevas ideas que mejoren las prestaciones de las redes in-home basadas en la tecnología PLC, utilizando como base el estándar Homeplug-AV. Estas redes utilizan una arquitectura centralizada, en la que la mayor parte de la inteligencia de red está concentrada en un coordinador central (CCo, por sus siglas en inglés). Por lo tanto, la mayor parte de las modificaciones propuestas irán encaminadas a mejorar dicho dispositivo, que podrá llegar a convertirse en un gestor de red capaz de manejar conjuntamente interfaces de diferentes tecnologías. En primer lugar, se presenta un análisis detallado del comportamiento del estándar en diferentes situaciones que se pueden producir de manera común en una red doméstica. Este análisis se realizó tanto con dispositivos reales como mediante simulación. Para el segundo tipo de medidas, se diseñó un simulador de la tecnología HomePlug que implementa el nivel físico y el nivel MAC de la misma, junto con modelos de los servicios más utilizados en entornos domésticos. Este simulador se utilizó tanto para estas medidas iniciales como para evaluar las diferentes modificaciones del estándar propuestas posteriormente en este trabajo. Este análisis proporcionó dos resultados significativos. En primer lugar, se comprobó que al introducir un modelo real de nivel físico al protocolo CSMA/CA utilizado a nivel MAC se producían resultados muy diferentes a los presentados en los modelos publicados hasta ese momento. Por ello, se propuso un modelo matemático que incorporaba dichos efectos. En segundo lugar, se identificaron diferentes áreas de la tecnología que eran susceptibles de mejora. El resto de la tesis se centró entonces en la mejora de dichos puntos débiles. El primero de estos puntos débiles está relacionado con las transmisión de datos unicast. El medio PLC es selectivo en frecuencia y muy dependiente del tiempo y de la localización de las estaciones. Incluso es posible que, en un mismo enlace, la capacidad de los enlaces ascendente y descendente sea distinta. En estos entornos, la utilización del protocolo de transporte TCP presenta serios problemas, ya que define gran parte de sus parámetros en función del Round Trip time (RTT) del enlace. Como alternativa se pensó en los códigos Fountain. Este tipo de codificación de fuente permite realizar transmisiones fiables de datos sin necesidad de utilizar un canal de retorno, evitando de esta forma los problemas derivados de las asimetrías de la red. Se realizaron varios experimentos comparando ambas soluciones, y se comprobó que las prestaciones de este tipo de codificaciones superan al protocolo TCP a la hora de transmitir ficheros de manera fiable a través de las redes PLC. Además, los códigos Fountain también se utilizaron para el diseño de otra aplicación. Es muy común que en un escenario doméstico haya disponible más de una tecnología (Wi-Fi, Ethernet, PLC, etc). Tenemos por tanto que una aplicación capaz de integrar interfaces de diferentes tecnologías podría ser muy útil en estos entornos, ya que se podría conseguir un mayor ancho de banda, mayor tolerancia a errores, balanceo de carga, etc. El kernel de Linux dispone de un módulo denominado Bonding que permite agrupar diferentes interfaces Ethernet. Sin embargo, no está preparado para agrupar interfaces de diferentes tecnologías, y mucho menos para tecnologás de capacidad variable como es el caso de PLC o de las comunicaciones inalámbricas. Por ello, se realizó una modificación de dicho driver utilizando para ello los códigos Fountain, que solucionan los problemas que se pueden producir debido a las variaciones de capacidad. Por otra parte, con la actual versión del estándar HomePlug AV, las comunicaciones multicast presentan unas prestaciones muy pobres. Esto es debido a que, a pesar de que el canal PLC es broadcast, la naturaleza de la modulación OFDM (Ortogonal Frequency Division Multiplexing) que se utiliza a nivel físico es punto a punto. Esto hace que las transmisiones simultáneas a un grupo de receptores se traduzcan automáticamente en sucesivas transmisiones punto a punto a los diferentes miembros del grupo. Con esta técnica, la capacidad efectiva de transmisión multicast disminuye de manera muy importante a medida que aumenta el número de receptores. En este trabajo se han propuesto dos técnicas alternativas. La primera consiste en la utilización de un mapa de tonos común para todos los miembros del grupo multicast, asignado a estas comunicaciones los parámetros de modulación del cliente con las peores condiciones de canal. Este algoritmo ha sido tradicionalmente descartado en los sistemas OFDM por sus bajas prestaciones. Sin embargo, la correlación existente entre los diferentes canales de una red PLC hace que su comportamiento sea mucho mejor. Además, se propuso un segundo algoritmo que utilizaba técnicas de optimización para maximizar la tasa de comunicación multicast, obteniendo un mejor comportamiento cuando el número de clientes es elevado. Por último, en redes de capacidad física variable, como es el caso de las redes PLC, las técnicas cross-layer están despertando un gran interés. Este tipo de algoritmos están basado en la compartición de información entre diferentes capas de la estructura OSI para mejorar el comportamiento del sistema. En este trabajo se ha propuesto un algoritmo que modifica los parámetros del protocolo CSMA/CA de nivel MAC utilizando información de nivel físico y los requerimientos de QoS del servicio de niveles superiores. De esta forma se consigue dar prioridad en el acceso al medio a los clientes con problemas de QoS, mejorando de esta forma del comportamiento de la red. Este algoritmo ha sido evaluado mediante simulación en un escenario doméstico típico, comprobando que ofrece unos resultados muy prometedores. [ENG] Not very long time ago, in-home networks (also called domestic networks) were only used to share a printer between a number of computers. Nowadays, however, due to the huge amount of devices present at home with communication capabilities, this definition has become much wider. In a current in-home network we can find, from mobile phones with wireless connectivity, or NAS (Network Attached Storage) devices sharing multimedia content with high-definition televisions or computers. When installing a communications network in a home, two objectives are mainly pursued: Reducing cost and high flexibility in supporting future network requirements. A network based on Power Line Communications (PLC) technology is able to fulfill these objectives, since as it uses the low voltage wiring already available at home, it is very easy to install and expand, providing a cost-effective solution for home environments. There are different PLC standards, being HomePlug-AV (HomePlug Audio-Video, or simply HPAV) the most widely used nowadays. This standard is able to achieve transmission rates up to 200 Mpbs through the electrical wiring of a typical home. The main objective of this thesis is to provide new ideas to improve the performance of PLC technology based in-home networks, using as starting point the HPAV standard. A network based on this technology uses a centralized architecture, in which the most important part of the network intelligence is concentrated in a single device, the Central Coordinator (CCo). Hence, most of the modifications proposed in this work will try to improve this particular device, which can even become a multi-technology central manager, able to combine interfaces of different technologies to improve the network performance. Initially, it is presented a detailed analysis of HPAV performance in some scenarios typically found in a home environment. It was done through simulation and by experimentation using real devices. To obtain the former results, it was designed a HPAV simulator which implements the physical (PHY) and medium access control (MAC) layers of the standard, together with a traffic modeling module which implements the services most commonly found in a home network. This simulation tool was used both in these initial measurements and to evaluate the standard modifications that are proposed in this work. This analysis provides two main results. Firstly, it was found that when a real PHY model is used together with the CSMA/CA MAC protocol the simulation results were very different to those obtained with previously presented mathematical models of this protocol. Hence, it was proposed a new model that considers these effects. Next, some areas of the technology which could be improved were identified. The rest of the thesis was then centered around proposing solutions to these weaknesses. The first weakness solved is related to unicast data transmission. PLC medium is frequency selective and time variant, and it presents a remarkable variation among locations or depending on the connected loads. Even in a single link, the channel capacities between transmitter and receiver can be very asymmetric. In such environments, the use of TCP as transport protocol presents serious problems, since it defines some of its parameters according to the Round Trip Time (RTT). Alternatively, the use of Fountain codes for reliable data transmission in these environments was proposed. These codes allow to transmit information without a feedback channel, overcoming in this way the problems related to the variability of the channel. Different experiments were performed comparing both solutions, concluding that in PLC based networks the performance achieved by Fountain codes outperforms the results obtained with a TCP-based application. In addition, Fountain codes were also used for another application. In home environments, it is very common to find more than one available technology to deploy a network (Wi-Fi, Ethernet, PLC, etc). Therefore, an application that makes possible the aggregation of different interfaces would be very useful, as it will provide higher bandwidth, fault tolerance and load balancing. The Linux Kernel contains a driver (Bonding) which allows Ethernet interfaces aggregation. However, it is not prepared for asymmetric interfaces aggregation and even less for variable capacity technologies like PLC or Wi-Fi. In this work, it is presented a modification of this driver which uses Fountain codes to solve the problems that may arise when asymmetric interfaces are aggregated. On another note, multicast communications in the actual HPAV standard versions presents serious problems. This is because, although PLC medium is broadcast by nature, the Orthogonal Frequency Division Multiplexing (OFDM) modulation used at PHY layer is always point to point. Therefore, multicast communications are carried out as successive point-to-point transmissions to the different members of the group. This technique clearly degrades the performance of multicast services as the number of receivers increases. In this work, they have been proposed two alternative algorithms. The first one consists of using a common tone map for all the multicast group members. This tone map corresponds to the modulation parameters obtained for the client with the worst channel conditions. This algorithm has been traditionally discarded in OFDM systems because of its poor performance. However, in contrast to other technologies (like wireless for example), channel responses in a given PLC network exhibit significant correlation among them. This reduces the differences among the users, improving the performance of this algorithm. In addition, another technique which uses an optimization algorithm to maximize the multicast bit rate is also evaluated, obtaining that its use can be suitable when the number of multicast clients is high. Finally, due to the properties of PLC medium, cross-layer technique are eliciting a big interest. These algorithms are based in the information sharing between adjacent layers in the OSI model to improve the system behavior. In this work, it has been proposed an extension of the HPAV CSMA/CA algorithm which modifies the protocol parameters using PHY layer information and the QoS requirements of the upper-layer services. In this way, priority access to the channel can be provided to the nodes with QoS problems, improving the whole network performance. This algorithm has been evaluated through simulation in a typical home environment with very promising results.Universidad Politécnica de Cartagen

S-RLNC based MAC Optimization for Multimedia Data Transmission over LTE/LTE-A Network

The high pace emergence in communication systems and associated demands has triggered academia-industries to achieve more efficient solution for Quality of Service (QoS) delivery for which recently introduced Long Term Evolution (LTE) or LTE-Advanced has been found as a promising solution. However, enabling QoS and Quality of Experience (QoE) delivery for multimedia data over LTE has always been a challenging task. QoS demands require reliable data transmission with minimum signalling overheads, computational complexity, minimum latency etc, for which classical Hybrid Automatic Repeat Request (HREQ) based LTE-MAC is not sufficient. To alleviate these issues, in this paper a novel and robust Multiple Generation Mixing (MGM) assisted Systematic Random Linear Network Coding (S-RLNC) model is developed to be used at the top of LTE MAC protocol stack for multimedia data transmission over LTE/LTE-A system. Our proposed model incorporated interleaving and coding approach along with MGM to ensure secure, resource efficient and reliable multiple data delivery over LTE systems. The simulation results reveal that our proposed S-RLNC-MGM based MAC can ensure QoS/QoE delivery over LTE systems for multimedia data communication

Joint coding/decoding techniques and diversity techniques for video and HTML transmission over wireless point/multipoint: a survey

I. Introduction The concomitant developments of the Internet, which offers to its users always larger and more evolved contents (from HTML (HyperText Markup Language) files to multimedia applications), and of wireless systems and handhelds integrating them, have progressively convinced a fair share of people of the interest to always be connected. Still, constraints of heterogeneity, reliability, quality and delay over the transmission channels are generally imposed to fulfill the requirements of these new needs and their corresponding economical goals. This implies different theoretical and practical challenges for the digital communications community of the present time. This paper presents a survey of the different techniques existing in the domain of HTML and video stream transmission over erroneous or lossy channels. In particular, the existing techniques on joint source and channel coding and decoding for multimedia or HTML applications are surveyed, as well as the related problems of streaming and downloading files over an IP mobile link. Finally, various diversity techniques that can be considered for such links, from antenna diversity to coding diversity, are presented...L’engouement du grand public pour les applications multimédia sans fil ne cesse de croître depuis le développement d’Internet. Des contraintes d’hétérogénéité de canaux de transmission, de fiabilité, de qualité et de délai sont généralement exigées pour satisfaire les nouveaux besoins applicatifs entraînant ainsi des enjeux économiques importants. À l’heure actuelle, il reste encore un certain nombre de défis pratiques et théoriques lancés par les chercheurs de la communauté des communications numériques. C’est dans ce cadre que s’inscrit le panorama présenté ici. Cet article présente d’une part un état de l’art sur les principales techniques de codage et de décodage conjoint développées dans la littérature pour des applications multimédia de type téléchargement et diffusion de contenu sur lien mobile IP. Sont tout d’abord rappelées des notions fondamentales des communications numériques à savoir le codage de source, le codage de canal ainsi que les théorèmes de Shannon et leurs principales limitations. Les techniques de codage décodage conjoint présentées dans cet article concernent essentiellement celles développées pour des schémas de codage de source faisant intervenir des codes à longueur variable (CLV) notamment les codes d’Huffman, arithmétiques et les codes entropiques universels de type Lempel-Ziv (LZ). Faisant face au problème de la transmission de données (Hypertext Markup Language (HTML) et vidéo) sur un lien sans fil, cet article présente d’autre part un panorama de techniques de diversités plus ou moins complexes en vue d’introduire le nouveau système à multiples antennes d’émission et de réception

Non-Orthogonal Signal and System Design for Wireless Communications

The thesis presents research in non-orthogonal multi-carrier signals, in which: (i) a new signal format termed truncated orthogonal frequency division multiplexing (TOFDM) is proposed to improve data rates in wireless communication systems, such as those used in mobile/cellular systems and wireless local area networks (LANs), and (ii) a new design and experimental implementation of a real-time spectrally efficient frequency division multiplexing (SEFDM) system are reported. This research proposes a modified version of the orthogonal frequency division multiplexing (OFDM) format, obtained by truncating OFDM symbols in the time-domain. In TOFDM, subcarriers are no longer orthogonally packed in the frequency-domain as time samples are only partially transmitted, leading to improved spectral efficiency. In this work, (i) analytical expressions are derived for the newly proposed TOFDM signal, followed by (ii) interference analysis, (iii) systems design for uncoded and coded schemes, (iv) experimental implementation and (v) performance evaluation of the new proposed signal and system, with comparisons to conventional OFDM systems. Results indicate that signals can be recovered with truncated symbol transmission. Based on the TOFDM principle, a new receiving technique, termed partial symbol recovery (PSR), is designed and implemented in software de ned radio (SDR), that allows efficient operation of two users for overlapping data, in wireless communication systems operating with collisions. The PSR technique is based on recovery of collision-free partial OFDM symbols, followed by the reconstruction of complete symbols to recover progressively the frames of two users suffering collisions. The system is evaluated in a testbed of 12-nodes using SDR platforms. The thesis also proposes channel estimation and equalization technique for non-orthogonal signals in 5G scenarios, using an orthogonal demodulator and zero padding. Finally, the implementation of complete SEFDM systems in real-time is investigated and described in detail