FISHING BOAT DISTRIBUTION ESTABLISHED BY COMPARING VMS AND VIIRS DATA AROUND THE ARU ISLANDS IN MALUKU INDONESIA

Marine protected areas (MPAs) and no take zones (NTZs) are essential for the preservation of marine ecosystems. However, these important areas can be severely harmed by illegal fishing. All vessels above 30 gross tons are required to use vessel monitoring systems (VMSs) that enable vessel tracking by sending geographic data to satellites in each specific time period. The Visible Infrared Radiometer Suite (VIIRS) is a sensor on the National Oceanic and Atmospheric Administration (NOAA)-20 satellite that can detect the light-emitting diode (LED) light used by fishing vessels from space during the night time. In this research, VMS and VIIRS fishery data were combined in order to identify fishing vessels that were detected by the VIIRS sensor of the NOAA-20 satellite. The research was focused on an area near the Aru Islands in the Arafura Sea in Indonesia. Data on LED light used by the fishing techniques of purse seine and bouke ami were obtained for the whole of 2018. The data were then processed using R software. An R package called LLFI (LED Light Fisheries Identifier) was created, containing several R-functions that calculate VMS vessel position during satellite overpass time and then combine the VMS and VIIRS data attributes, resulting in a dataset comprising vessels identified from the VIIRS dataset. Out of all the estimated VMS fishing vessel positions during the VIIRS satellite overpass, approximately 51% could be assigned to fishing vessels detected from the VIIRS dataset. For bouke ami, the identification rate was approximately 87%, while that for small purse seine was around 39%. Ultimately, the LLFI package created daily paths for each identified fishing vessel, displaying all its movements during the day of its’identification. These daily paths did not show any activity within MPA or NTZ. The LLFI package was successful in combining VMS and VIIRS data, estimating VMS vessel positions during the VIIRS satellite overpass, identifying a percentage of  the vessels, and creating a daily path for each identified vessel.

Shining light on data-poor coastal fisheries

This is the final version. Available on open access from Frontiers Media via the DOI in this recordData Availability Statement: VIIRS Boat Detection data productmade available open access by the Earth Observation Group, Payne Institute for Public Policy (https://eogdata.mines.edu/vbd/). The other datasets presented in this article are not readily available because data requests need to be made directly to the WCS Myanmar offices. Requests to access the datasets should be directed to WCS Myanmar, [email protected] fisheries provide livelihoods and sustenance for millions of people globally but are often poorly documented. Data scarcity, particularly relating to spatio-temporal trends in catch and effort, compounds wider issues of governance capacity. This can hinder the implementation and effectiveness of spatial tools for fisheries management or conservation. This issue is acute in developing and low income regions with many small-scale inshore fisheries and high marine biodiversity, such as Southeast Asia. As a result, fleets often operate unmonitored with implications for target and non-target species populations and the wider marine ecosystem. Novel and cost-effective approaches to obtain fisheries data are required to monitor these activities and help inform sustainable fishery and marine ecosystem management. One such example is the detection and numeration of fishing vessels that use artificial light to attract catch with nighttime satellite imagery. Here we test the efficiency and application value of nighttime satellite imagery, in combination with landings data and GPS tracked vessels, to estimate the footprint and biomass removal of an inshore purse seine fishery operating within a region of high biodiversity in Myanmar. By quantifying the number of remotely sensed vessel detections per month, adjusted for error by the GPS tracked vessels, we can extrapolate data from fisher logbooks to provide fine-scale spatiotemporal estimates of the fishery’s effort, value and biomass removal. Estimates reveal local landings of nearly 9,000 mt worth close to $4 million USD annually. This approach details how remote sensed and in situ collected data can be applied to other fleets using artificial light to attract catch, notably inshore fisheries of Southeast Asia, whilst also providing a much-needed baseline understanding of a data-poor fishery’s spatiotemporal activity, biomass removal, catch composition and landing of vulnerable species.Wildlife Conservation Societ

Using AIS to Attempt a Quantitative Evaluation of Unobserved Trawling Activity in the Mediterranean Sea

In the past decades, the Automatic Identification System (AIS) has been employed in numerous research fields as a valuable tool for, among other things, Maritime Domain Awareness and Maritime Spatial Planning. In contrast, its use in fisheries management is hampered by coverage and transmission gaps. Transmission gaps may be due to technical limitations (e.g., weak signal or interference with other signals) or to deliberate switching off of the system, to conceal fishing activities. In either case such gaps may result in underestimating fishing effort and pressure. This study was undertaken to map and analyze bottom trawler transmission gaps in terms of duration and distance from the harbor with a view to quantifying unobserved fishing and its effects on overall trawling pressure. Here we present the first map of bottom trawler AIS transmission gaps in the Mediterranean Sea and a revised estimate of fishing effort if some gaps are considered as actual fishing

Cross-Matching VIIRS Boat Detections with Vessel Monitoring System Tracks in Indonesia

A methodology had been proposed for cross-matching visible infrared imaging radiometer suite (VIIRS) boat detections (VBD) with vessel monitoring system (VMS) tracks. The process involves predicting the probable location of VMS vessels at the time of each VIIRS data collection with an orbital model. Thirty-two months of Indonesian VMS data was segmented into fishing and transit activity types and then cross-matched with the VBD record. If a VBD record is found within 700 m and 5 s of the predicted location, it is marked as a match. The cross-matching indicates that 96% of the matches occur while the vessel is fishing. Small pelagic purse seiners account for 27% of the matches. Other gear types with high match rates include hand line tuna, squid dip net, squid jigging, and large pelagic purse seiners. Low match rates were found for gillnet, trawlers, and long line tuna. There is an indication that VMS vessels using submersible lights can be identified based on consistently low average radiances and match rates under 45%. Overall, VBD numbers exceed VMS vessel numbers in Indonesia by a nine to one ratio, indicating that VIIRS detects large numbers of fishing boats under the 30 Gross Tonnage (GT) level set for the VMS requirement. The cross-matching could be used to identify “dark” vessels that lack automatic identification system (AIS) or VMS

Remote Sensing of Plant Biodiversity

At last, here it is. For some time now, the world has needed a text providing both a new theoretical foundation and practical guidance on how to approach the challenge of biodiversity decline in the Anthropocene. This is a global challenge demanding global approaches to understand its scope and implications. Until recently, we have simply lacked the tools to do so. We are now entering an era in which we can realistically begin to understand and monitor the multidimensional phenomenon of biodiversity at a planetary scale. This era builds upon three centuries of scientific research on biodiversity at site to landscape levels, augmented over the past two decades by airborne research platforms carrying spectrometers, lidars, and radars for larger-scale observations. Emerging international networks of fine-grain in-situ biodiversity observations complemented by space-based sensors offering coarser-grain imagery—but global coverage—of ecosystem composition, function, and structure together provide the information necessary to monitor and track change in biodiversity globally. This book is a road map on how to observe and interpret terrestrial biodiversity across scales through plants—primary producers and the foundation of the trophic pyramid. It honors the fact that biodiversity exists across different dimensions, including both phylogenetic and functional. Then, it relates these aspects of biodiversity to another dimension, the spectral diversity captured by remote sensing instruments operating at scales from leaf to canopy to biome. The biodiversity community has needed a Rosetta Stone to translate between the language of satellite remote sensing and its resulting spectral diversity and the languages of those exploring the phylogenetic diversity and functional trait diversity of life on Earth. By assembling the vital translation, this volume has globalized our ability to track biodiversity state and change. Thus, a global problem meets a key component of the global solution. The editors have cleverly built the book in three parts. Part 1 addresses the theory behind the remote sensing of terrestrial plant biodiversity: why spectral diversity relates to plant functional traits and phylogenetic diversity. Starting with first principles, it connects plant biochemistry, physiology, and macroecology to remotely sensed spectra and explores the processes behind the patterns we observe. Examples from the field demonstrate the rising synthesis of multiple disciplines to create a new cross-spatial and spectral science of biodiversity. Part 2 discusses how to implement this evolving science. It focuses on the plethora of novel in-situ, airborne, and spaceborne Earth observation tools currently and soon to be available while also incorporating the ways of actually making biodiversity measurements with these tools. It includes instructions for organizing and conducting a field campaign. Throughout, there is a focus on the burgeoning field of imaging spectroscopy, which is revolutionizing our ability to characterize life remotely. Part 3 takes on an overarching issue for any effort to globalize biodiversity observations, the issue of scale. It addresses scale from two perspectives. The first is that of combining observations across varying spatial, temporal, and spectral resolutions for better understanding—that is, what scales and how. This is an area of ongoing research driven by a confluence of innovations in observation systems and rising computational capacity. The second is the organizational side of the scaling challenge. It explores existing frameworks for integrating multi-scale observations within global networks. The focus here is on what practical steps can be taken to organize multi-scale data and what is already happening in this regard. These frameworks include essential biodiversity variables and the Group on Earth Observations Biodiversity Observation Network (GEO BON). This book constitutes an end-to-end guide uniting the latest in research and techniques to cover the theory and practice of the remote sensing of plant biodiversity. In putting it together, the editors and their coauthors, all preeminent in their fields, have done a great service for those seeking to understand and conserve life on Earth—just when we need it most. For if the world is ever to construct a coordinated response to the planetwide crisis of biodiversity loss, it must first assemble adequate—and global—measures of what we are losing

An Investigation on Benefit-Cost Analysis of Greenhouse Structures in Antalya

Significant population increase across the world, loss of cultivable land and increasing demand for food put pressure on agriculture. To meet the demand, greenhouses are built, which are, light structures with transparent cladding material in order to provide controlled microclimatic environment proper for plant production. Conceptually, greenhouses are similar with manufacturing buildings where a controlled environment for manufacturing and production have been provided and proper spaces for standardized production processes have been enabled. Parallel with the trends in the world, particularly in southern regions, greenhouse structures have been increasingly constructed and operated in Turkey. A significant number of greenhouses are located at Antalya. The satellite images demonstrated that for over last three decades, there has been a continuous invasion of greenhouses on all cultivable land. There are various researches and attempts for the improvement of greenhouse design and for increasing food production by decreasing required energy consumption. However, the majority of greenhouses in Turkey are very rudimentary structures where capital required for investment is low, but maintenance requirements are high when compared with new generation greenhouse structures. In this research paper, life-long capital requirements for construction and operation of greenhouse buildings in Antalya has been investigated by using benefit-cost analysis study

Knowledge Capturing in Design Briefing Process for Requirement Elicitation and Validation

Knowledge capturing and reusing are major processes of knowledge management that deal with the elicitation of valuable knowledge via some techniques and methods for use in actual and further studies, projects, services, or products. The construction industry, as well, adopts and uses some of these concepts to improve various construction processes and stages. From pre-design to building delivery knowledge management principles and briefing frameworks have been implemented across project stakeholders: client, design teams, construction teams, consultants, and facility management teams. At pre-design and design stages, understanding the client’s needs and users’ knowledge are crucial for identifying and articulating the expected requirements and objectives. Due to underperforming results and missed goals and objectives, many projects finish with highly dissatisfied clients and loss of contracts for some organizations. Knowledge capturing has beneficial effects via its principles and methods on requirement elicitation and validation at the briefing stage between user, client and designer. This paper presents the importance and usage of knowledge capturing and reusing in briefing process at pre-design and design stages especially the involvement of client and user, and explores the techniques and technologies that are usable in briefing process for requirement elicitation