Conserve and Protect Resources in Software-Defined Networking via the Traffic Engineering Approach

Software Defined Networking (SDN) is revolutionizing the architecture and operation of computer networks and promises a more agile and cost-efficient network management. SDN centralizes the network control logic and separates the control plane from the data plane, thus enabling flexible management of networks. A network based on SDN consists of a data plane and a control plane. To assist management of devices and data flows, a network also has an independent monitoring plane. These coexisting network planes have various types of resources, such as bandwidth utilized to transmit monitoring data, energy spent to power data forwarding devices and computational resources to control a network. Unwise management, even abusive utilization of these resources lead to the degradation of the network performance and increase the Operating Expenditure (Opex) of the network owner. Conserving and protecting limited network resources is thus among the key requirements for efficient networking. However, the heterogeneity of the network hardware and network traffic workloads expands the configuration space of SDN, making it a challenging task to operate a network efficiently. Furthermore, the existing approaches usually lack the capability to automatically adapt network configurations to handle network dynamics and diverse optimization requirements. Addtionally, a centralized SDN controller has to run in a protected environment against certain attacks. This thesis builds upon the centralized management capability of SDN, and uses cross-layer network optimizations to perform joint traffic engineering, e.g., routing, hardware and software configurations. The overall goal is to overcome the management complexities in conserving and protecting resources in multiple functional planes in SDN when facing network heterogeneities and system dynamics. This thesis presents four contributions: (1) resource-efficient network monitoring, (2) resource-efficient data forwarding, (3) using self-adaptive algorithms to improve network resource efficiency, and (4) mitigating abusive usage of resources for network controlling. The first contribution of this thesis is a resource-efficient network monitoring solution. In this thesis, we consider one specific type of virtual network management function: flow packet inspection. This type of the network monitoring application requires to duplicate packets of target flows and send them to packet monitors for in-depth analysis. To avoid the competition for resources between the original data and duplicated data, the network operators can transmit the data flows through physically (e.g., different communication mediums) or virtually (e.g., distinguished network slices) separated channels having different resource consumption properties. We propose the REMO solution, namely Resource Efficient distributed Monitoring, to reduce the overall network resource consumption incurred by both types of data, via jointly considering the locations of the packet monitors, the selection of devices forking the data packets, and flow path scheduling strategies. In the second contribution of this thesis, we investigate the resource efficiency problem in hybrid, server-centric data center networks equipped with both traditional wired connections (e.g., InfiniBand or Ethernet) and advanced high-data-rate wireless links (e.g., directional 60GHz wireless technology). The configuration space of hybrid SDN equipped with both wired and wireless communication technologies is massively large due to the complexity brought by the device heterogeneity. To tackle this problem, we present the ECAS framework to reduce the power consumption and maintain the network performance. The approaches based on the optimization models and heuristic algorithms are considered as the traditional way to reduce the operation and facility resource consumption in SDN. These approaches are either difficult to directly solve or specific for a particular problem space. As the third contribution of this thesis, we investigates the approach of using Deep Reinforcement Learning (DRL) to improve the adaptivity of the management modules for network resource and data flow scheduling. The goal of the DRL agent in the SDN network is to reduce the power consumption of SDN networks without severely degrading the network performance. The fourth contribution of this thesis is a protection mechanism based upon flow rate limiting to mitigate abusive usage of the SDN control plane resource. Due to the centralized architecture of SDN and its handling mechanism for new data flows, the network controller can be the failure point due to the crafted cyber-attacks, especially the Control-Plane- Saturation (CPS) attack. We proposes an In-Network Flow mAnagement Scheme (INFAS) to effectively reduce the generation of malicious control packets depending on the parameters configured for the proposed mitigation algorithm. In summary, the contributions of this thesis address various unique challenges to construct resource-efficient and secure SDN. This is achieved by designing and implementing novel and intelligent models and algorithms to configure networks and perform network traffic engineering, in the protected centralized network controller

Network flow optimization for distributed clouds

Internet applications, which rely on large-scale networked environments such as data centers for their back-end support, are often geo-distributed and typically have stringent performance constraints. The interconnecting networks, within and across data centers, are critical in determining these applications' performance. Data centers can be viewed as composed of three layers: physical infrastructure consisting of servers, switches, and links, control platforms that manage the underlying resources, and applications that run on the infrastructure. This dissertation shows that network flow optimization can improve performance of distributed applications in the cloud by designing high-throughput schemes spanning all three layers. At the physical infrastructure layer, we devise a framework for measuring and understanding throughput of network topologies. We develop a heuristic for estimating the worst-case performance of any topology and propose a systematic methodology for comparing performance of networks built with different equipment. At the control layer, we put forward a source-routed data center fabric which can achieve near-optimal throughput performance by leveraging a large number of available paths while using limited memory in switches. At the application layer, we show that current Application Network Interfaces (ANIs), abstractions that translate an application's performance goals to actionable network objectives, fail to capture the requirements of many emerging applications. We put forward a novel ANI that can capture application intent more effectively and quantify performance gains achievable with it. We also tackle resource optimization in the inter-data center context of cellular providers. In this emerging environment, a large amount of resources are geographically fragmented across thousands of micro data centers, each with a limited share of resources, necessitating cross-application optimization to satisfy diverse performance requirements and improve network and server utilization. Our solution, Patronus, employs hierarchical optimization for handling multiple performance requirements and temporally partitioned scheduling for scalability

Geo-distributed Edge and Cloud Resource Management for Low-latency Stream Processing

The proliferation of Internet-of-Things (IoT) devices is rapidly increasing the demands for efficient processing of low latency stream data generated close to the edge of the network. Edge Computing provides a layer of infrastructure to fill latency gaps between the IoT devices and the back-end cloud computing infrastructure. A large number of IoT applications require continuous processing of data streams in real-time. Edge computing-based stream processing techniques that carefully consider the heterogeneity of the computing and network resources available in the geo-distributed infrastructure provide significant benefits in optimizing the throughput and end-to-end latency of the data streams. Managing geo-distributed resources operated by individual service providers raises new challenges in terms of effective global resource sharing and achieving global efficiency in the resource allocation process. In this dissertation, we present a distributed stream processing framework that optimizes the performance of stream processing applications through a careful allocation of computing and network resources available at the edge of the network. The proposed approach differentiates itself from the state-of-the-art through its careful consideration of data locality and resource constraints during physical plan generation and operator placement for the stream queries. Additionally, it considers co-flow dependencies that exist between the data streams to optimize the network resource allocation through an application-level rate control mechanism. The proposed framework incorporates resilience through a cost-aware partial active replication strategy that minimizes the recovery cost when applications incur failures. The framework employs a reinforcement learning-based online learning model for dynamically determining the level of parallelism to adapt to changing workload conditions. The second dimension of this dissertation proposes a novel model for allocating computing resources in edge and cloud computing environments. In edge computing environments, it allows service providers to establish resource sharing contracts with infrastructure providers apriori in a latency-aware manner. In geo-distributed cloud environments, it allows cloud service providers to establish resource sharing contracts with individual datacenters apriori for defined time intervals in a cost-aware manner. Based on these mechanisms, we develop a decentralized implementation of the contract-based resource allocation model for geo-distributed resources using Smart Contracts in Ethereum

Enabling Distributed Applications Optimization in Cloud Environment

The past few years have seen dramatic growth in the popularity of public clouds, such as Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS), and Container-as-a-Service (CaaS). In both commercial and scientific fields, quick environment setup and application deployment become a mandatory requirement. As a result, more and more organizations choose cloud environments instead of setting up the environment by themselves from scratch. The cloud computing resources such as server engines, orchestration, and the underlying server resources are served to the users as a service from a cloud provider. Most of the applications that run in public clouds are the distributed applications, also called multi-tier applications, which require a set of servers, a service ensemble, that cooperate and communicate to jointly provide a certain service or accomplish a task. Moreover, a few research efforts are conducting in providing an overall solution for distributed applications optimization in the public cloud. In this dissertation, we present three systems that enable distributed applications optimization: (1) the first part introduces DocMan, a toolset for detecting containerized application’s dependencies in CaaS clouds, (2) the second part introduces a system to deal with hot/cold blocks in distributed applications, (3) the third part introduces a system named FP4S, a novel fragment-based parallel state recovery mechanism that can handle many simultaneous failures for a large number of concurrently running stream applications

On the Importance of Infrastructure-Awareness in Large-Scale Distributed Storage Systems

Big data applications put significant latency and throughput demands on distributed storage systems. Meeting these demands requires storage systems to use a significant amount of infrastructure resources, such as network capacity and storage devices. Resource demands largely depend on the workloads and can vary significantly over time. Moreover, demand hotspots can move rapidly between different infrastructure locations. Existing storage systems are largely infrastructure-oblivious as they are designed to support a broad range of hardware and deployment scenarios. Most only use basic configuration information about the infrastructure to make important placement and routing decisions. In the case of cloud-based storage systems, cloud services have their own infrastructure-specific limitations, such as minimum request sizes and maximum number of concurrent requests. By ignoring infrastructure-specific details, these storage systems are unable to react to resource demand changes and may have additional inefficiencies from performing redundant network operations. As a result, provisioning enough resources for these systems to address all possible workloads and scenarios would be cost prohibitive. This thesis studies the performance problems in commonly used distributed storage systems and introduces novel infrastructure-aware design methods to improve their performance. First, it addresses the problem of slow reads due to network congestion that is induced by disjoint replica and path selection. Selecting a read replica separately from the network path can perform poorly if all paths to the pre-selected endpoints are congested. Second, this thesis looks at scalability limitations of consensus protocols that are commonly used in geo-distributed key value stores and distributed ledgers. Due to their network-oblivious designs, existing protocols redundantly communicate over highly oversubscribed WAN links, which poorly utilize network resources and limits consistent replication at large scale. Finally, this thesis addresses the need for a cloud-specific realtime storage system for capital market use cases. Public cloud infrastructures provide feature-rich and cost-effective storage services. However, existing realtime timeseries databases are not built to take advantage of cloud storage services. Therefore, they do not effectively utilize cloud services to provide high performance while minimizing deployment cost. This thesis presents three systems that address these problems by using infrastructure-aware design methods. Our performance evaluation of these systems shows that infrastructure-aware design is highly effective in improving the performance of large scale distributed storage systems

Configurable data center switch architectures

In this thesis, we explore alternative architectures for implementing con_gurable Data Center Switches along with the advantages that can be provided by such switches. Our first contribution centers around determining switch architectures that can be implemented on Field Programmable Gate Array (FPGA) to provide configurable switching protocols. In the process, we identify a gap in the availability of frameworks to realistically evaluate the performance of switch architectures in data centers and contribute a simulation framework that relies on realistic data center traffic patterns. Our framework is then used to evaluate the performance of currently existing as well as newly proposed FPGA-amenable switch designs. Through collaborative work with Meng and Papaphilippou, we establish that only small-medium range switches can be implemented on today's FPGAs. Our second contribution is a novel switch architecture that integrates a custom in-network hardware accelerator with a generic switch to accelerate Deep Neural Network training applications in data centers. Our proposed accelerator architecture is prototyped on an FPGA, and a scalability study is conducted to demonstrate the trade-offs of an FPGA implementation when compared to an ASIC implementation. In addition to the hardware prototype, we contribute a light weight load-balancing and congestion control protocol that leverages the unique communication patterns of ML data-parallel jobs to enable fair sharing of network resources across different jobs. Our large-scale simulations demonstrate the ability of our novel switch architecture and light weight congestion control protocol to both accelerate the training time of machine learning jobs by up to 1.34x and benefit other latency-sensitive applications by reducing their 99%-tile completion time by up to 4.5x. As for our final contribution, we identify the main requirements of in-network applications and propose a Network-on-Chip (NoC)-based architecture for supporting a heterogeneous set of applications. Observing the lack of tools to support such research, we provide a tool that can be used to evaluate NoC-based switch architectures.Open Acces

Building interactive distributed processing applications at a global scale

Along with the continuous engagement with technology, many latency-sensitive interactive applications have emerged, e.g., global content sharing in social networks, adaptive lights/temperatures in smart buildings, and online multi-user games. These applications typically process a massive amount of data at a global scale. In this cases, distributing storage and processing is key to handling the large scale. Distribution necessitates handling two main aspects: a) the placement of data/processing and b) the data motion across the distributed locations. However, handling the distribution while meeting latency guarantees at large scale comes with many challenges around hiding heterogeneity and diversity of devices and workload, handling dynamism in the environment, providing continuous availability despite failures, and supporting persistent large state. In this thesis, we show how latency-driven designs for placement and data-motion can be used to build production infrastructures for interactive applications at a global scale, while also being able to address myriad challenges on heterogeneity, dynamism, state, and availability. We demonstrate a latency-driven approach is general and applicable at all layers of the stack: from storage, to processing, down to networking. We designed and built four distinct systems across the spectrum. We have developed Ambry (collaboration with LinkedIn), a geo-distributed storage system for interactive data sharing across the globe. Ambry is LinkedIn's mainstream production system for all its media content running across 4 datacenters and over 500 million users. Ambry minimizes user perceived latency via smart data placement and propagation. Second, we have built two processing systems, a traditional model, Samza, and the avant-garde model, Steel. Samza (collaboration with LinkedIn) is a production stream processing framework used at 15 companies (including LinkedIn, Uber, Netflix, and TripAdvisor), powering >200 pipelines at LinkedIn alone. Samza minimizes the impact of data motion on the end-to-end latency, thus, enabling large persistent state (100s of TB) along with processing. Steel (collaboration with Microsoft) extends processing to the emerging edge. Integrated with Azure, Steel dynamically optimizes placement and data-motion across the entire edge-cloud environment. Finally, we have designed FreeFlow, a high performance networking mechanisms for containers. Using the container placement, FreeFlow opportunistically bypasses networking layers, minimizing data motion and reducing latency (up to 3 orders of magnitude)

Application-Aware Network Design Using Software Defined Networking for Application Performance Optimization for Big Data and Video Streaming

Title from PDF of title page viewed October 30, 2017Dissertation advisor: Deep MedhiVitaIncludes bibliographical references (pages 122-135)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2017This dissertation investigates improvement in application performance. For applications, we consider two classes: Hadoop MapReduce and video streaming. The Hadoop MapReduce (M/R) framework has become the de facto standard for Big Data analytics. However, the lack of network-awareness of the default MapReduce resource manager in a traditional IP network can cause unbalanced job scheduling and network bottlenecks; such factors can eventually lead to an increase in the Hadoop MapReduce job completion time. Dynamic Video streaming over the HTTP (MPEG-DASH) is becoming the defacto dominating transport for today’s video applications. It has been implemented in today’s major media carriers such as Youtube and Netflix. It enables new video applications to fully utilize the existing physical IP network infrastructure. For new 3D immersive medias such as Virtual Reality and 360-degree videos are drawing great attentions from both consumers and researchers in recent years. One of the biggest challenges in streaming such 3D media is the high band width demands and video quality. A new Tile-based video is introduced in both video codec and streaming layer to reduce the transferred media size. In this dissertation, we propose a Software-Defined Network (SDN) approach in an Application-Aware Network (AAN) platform. We first present an architecture for our approach and then show how this architecture can be applied to two aforementioned application areas. Our approach provides both underlying network functions and application level forwarding logics for Hadoop MapReduce and video streaming. By incorporating a comprehensive view of the network, the SDN controller can optimize MapReduce work loads and DASH flows for videos by application-aware traffic reroute. We quantify the improvement for both Hadoop and MPEG-DASH in terms of job completion time and user’s quality of experience (QoE), respectively. Based on our experiments, we observed that our AAN platform for Hadoop MapReduce job optimization offer a significant improvement compared to a static, traditional IP network environment by reducing job run time by 16% to 300% for various MapReduce benchmark jobs. As for MPEG-DASH based video streaming, we can increase user perceived video bitrate by 100%.Introduction -- Research survey -- Proposed architecture -- AAN-SDN for Hadoop -- Study of User QoE Improvement for Dynamic Adaptive Streaming over HTTP (MPEG-DASH) -- AAN-SDN For MPEG-DASH -- Conclusion -- Appendix A. Mininet Topology Source Code For DASH Setup -- Appendix B. Hadoop Installation Source Code -- Appendix C. Openvswitch Installation Source Code -- Appendix D. HiBench Installation Guid

Understanding the characteristics of Internet traffic and designing an efficient RaptorQ-based data transport protocol for modern data centres

This thesis is the amalgamation of research on efficient data transport protocols for data centres and a comprehensive and systematic study of Internet traffic, which came as a result of the need to understand traffic patterns and workloads in modern computer networks. The first part of the thesis is on the development of efficient data transport pro- tocols for data centres. We study modern data transport protocols for data centres through large scale simulations using the OMNeT++ simulator. We developed and experimented with an OMNeT++ model of NDP. This has led to the identification of limitations of the state of the art and the formulation of research questions with respect to data transport protocols for modern data centres. The developed model includes an implementation of a Fat-tree topology and per-packet ECMP load bal- ancing. We discuss how we integrated the model with the INET Framework and validated it by running various experiments that test different model parameters and components. This work revealed limitations of NDP with respect to efficient one-to-many and many-to-one communication in data centres, which led to the de- velopment of SCDP, a novel and general-purpose data transport protocol for data centres that, in contrast to all other protocols proposed to date, natively supports one-to-many and many-to-one data communication, which is extremely common in modern data centres. SCDP does so without compromising on efficiency for short and long unicast flows. SCDP achieves this by integrating RaptorQ codes with receiver-driven data transport, in-network packet trimming and Multi-Level Feed- back Queuing (MLFQ); (1) RaptorQ codes enable efficient one-to-many and many- to-one data transport; (2) on top of RaptorQ codes, receiver- driven flow control, in combination with in-network packet trimming, enable efficient usage of network re- sources as well as multi-path transport and packet spraying for all transport modes. Incast and Outcast are eliminated; (3) the systematic nature of RaptorQ codes, in combination with MLFQ, enable fast, decoding-free completion of short flows. We extensively evaluated SCDP in a wide range of simulated scenarios with realistic data centre workloads. For one-to-many and many-to-one transport sessions, SCDP performs significantly better than NDP. For short and long unicast flows, SCDP performs equally well or better compared to NDP. In the second part of the thesis, we extensively study Internet traffic. Getting good statistical models of traffic on network links is a well-known, often-studied problem. A lot of attention has been given to correlation patterns and flow duration. The distribution of the amount of traffic per unit time is an equally important but less studied problem. We study a large number of traffic traces from many different networks including academic, commercial and residential networks using state-of-the-art statistical techniques. We show that the log-normal distribution is a better fit than the Gaussian distribution. We also investigate a second, heavy- tailed distribution and show that its performance is better than Gaussian but worse than log-normal. We examine anomalous traces which are a poor fit for all tested distributions and show that this is often due to traffic outages or links that hit maximum capacity. Stationarity tests showed that the traffic is stationary at some range of aggregation times. We demonstrate the utility of the log-normal distribution in two contexts: predicting the proportion of time traffic will exceed a given level (for link capacity estimation) and predicting 95th percentile pricing. We also show the log-normal distribution is a better predictor than Gaussian orWeibull distributions