673 research outputs found
Bio-Inspired Tools for a Distributed Wireless Sensor Network Operating System
The problem which I address in this thesis is to find a way to organise and manage a network
of wireless sensor nodes using a minimal amount of communication. To find a solution I explore
the use of Bio-inspired protocols to enable WSN management while maintaining a low
communication overhead. Wireless Sensor Networks (WSNs) are loosely coupled distributed
systems comprised of low-resource, battery powered sensor nodes. The largest problem with
WSN management is that communication is the largest consumer of a sensor node’s energy.
WSN management systems need to use as little communication as possible to prolong their operational
lifetimes. This is the Wireless Sensor Network Management Problem. This problem
is compounded because current WSN management systems glue together unrelated protocols
to provide system services causing inter-protocol interference. Bio-inspired protocols provide a
good solution because they enable the nodes to self-organise, use local area communication, and
can combine their communication in an intelligent way with minimal increase in communication.
I present a combined protocol and MAC scheduler to enable multiple service protocols to
function in a WSN at the same time without causing inter-protocol interference. The scheduler
is throughput optimal as long as the communication requirements of all of the protocols remain
within the communication capacity of the network. I show that the scheduler improves a dissemination
protocol’s performance by 35%. A bio-inspired synchronisation service is presented
which enables wireless sensor nodes to self organise and provide a time service. Evaluation of
the protocol shows an 80% saving in communication over similar bio-inspired synchronisation
approaches. I then add an information dissemination protocol, without significantly increasing
communication. This is achieved through the ability of our bio-inspired algorithms to combine
their communication in an intelligent way so that they are able to offer multiple services
without requiring a great deal of inter-node communication.Open Acces
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Recommended from our members
An Emergent Architecture for Scaling Decentralized Communication Systems (DCS)
With recent technological advancements now accelerating the mobile and wireless Internet solution space, a ubiquitous computing Internet is well within the research and industrial community's design reach - a decentralized system design, which is not solely driven by static physical models and sound engineering principals, but more dynamically, perhaps sub-optimally at initial deployment and socially-influenced in its evolution. To complement today's Internet system, this thesis proposes a Decentralized Communication System (DCS) architecture with the following characteristics: flat physical topologies with numerous compute oriented and communication intensive nodes in the network with many of these nodes operating in multiple functional roles; self-organizing virtual structures formed through alternative mobility scenarios and capable of serving ad hoc networking formations; emergent operations and control with limited dependency on centralized control and management administration. Today, decentralized systems are not commercially scalable or viable for broad adoption in the same way we have to come to rely on the Internet or telephony systems. The premise in this thesis is that DCS can reach high levels of resilience, usefulness, scale that the industry has come to experience with traditional centralized systems by exploiting the following properties: (i.) network density and topological diversity; (ii.) self-organization and emergent attributes; (iii.) cooperative and dynamic infrastructure; and (iv.) node role diversity. This thesis delivers key contributions towards advancing the current state of the art in decentralized systems. First, we present the vision and a conceptual framework for DCS. Second, the thesis demonstrates that such a framework and concept architecture is feasible by prototyping a DCS platform that exhibits the above properties or minimally, demonstrates that these properties are feasible through prototyped network services. Third, this work expands on an alternative approach to network clustering using hierarchical virtual clusters (HVC) to facilitate self-organizing network structures. With increasing network complexity, decentralized systems can generally lead to unreliable and irregular service quality, especially given unpredictable node mobility and traffic dynamics. The HVC framework is an architectural strategy to address organizational disorder associated with traditional decentralized systems. The proposed HVC architecture along with the associated promotional methodology organizes distributed control and management services by leveraging alternative organizational models (e.g., peer-to-peer (P2P), centralized or tiered) in hierarchical and virtual fashion. Through simulation and analytical modeling, we demonstrate HVC efficiencies in DCS structural scalability and resilience by comparing static and dynamic HVC node configurations against traditional physical configurations based on P2P, centralized or tiered structures. Next, an emergent management architecture for DCS exploiting HVC for self-organization, introduces emergence as an operational approach to scaling DCS services for state management and policy control. In this thesis, emergence scales in hierarchical fashion using virtual clustering to create multiple tiers of local and global separation for aggregation, distribution and network control. Emergence is an architectural objective, which HVC introduces into the proposed self-management design for scaling and stability purposes. Since HVC expands the clustering model hierarchically and virtually, a clusterhead (CH) node, positioned as a proxy for a specific cluster or grouped DCS nodes, can also operate in a micro-capacity as a peer member of an organized cluster in a higher tier. As the HVC promotional process continues through the hierarchy, each tier of the hierarchy exhibits emergent behavior. With HVC as the self-organizing structural framework, a multi-tiered, emergent architecture enables the decentralized management strategy to improve scaling objectives that traditionally challenge decentralized systems. The HVC organizational concept and the emergence properties align with and the view of the human brain's neocortex layering structure of sensory storage, prediction and intelligence. It is the position in this thesis, that for DCS to scale and maintain broad stability, network control and management must strive towards an emergent or natural approach. While today's models for network control and management have proven to lack scalability and responsiveness based on pure centralized models, it is unlikely that singular organizational models can withstand the operational complexities associated with DCS. In this work, we integrate emergence and learning-based methods in a cooperative computing manner towards realizing DCS self-management. However, unlike many existing work in these areas which break down with increased network complexity and dynamics, the proposed HVC framework is utilized to offset these issues through effective separation, aggregation and asynchronous processing of both distributed state and policy. Using modeling techniques, we demonstrate that such architecture is feasible and can improve the operational robustness of DCS. The modeling emphasis focuses on demonstrating the operational advantages of an HVC-based organizational strategy for emergent management services (i.e., reachability, availability or performance). By integrating the two approaches, the DCS architecture forms a scalable system to address the challenges associated with traditional decentralized systems. The hypothesis is that the emergent management system architecture will improve the operational scaling properties of DCS-based applications and services. Additionally, we demonstrate structural flexibility of HVC as an underlying service infrastructure to build and deploy DCS applications and layered services. The modeling results demonstrate that an HVC-based emergent management and control system operationally outperforms traditional structural organizational models. In summary, this thesis brings together the above contributions towards delivering a scalable, decentralized system for Internet mobile computing and communications
Robotic ubiquitous cognitive ecology for smart homes
Robotic ecologies are networks of heterogeneous robotic devices pervasively embedded in everyday environments, where they cooperate to perform complex tasks. While their potential makes them increasingly popular, one fundamental problem is how to make them both autonomous and adaptive, so as to reduce the amount of preparation, pre-programming and human supervision that they require in real world applications. The project RUBICON develops learning solutions which yield cheaper, adaptive and efficient coordination of robotic ecologies. The approach we pursue builds upon a unique combination of methods from cognitive robotics, machine learning, planning and agent- based control, and wireless sensor networks. This paper illustrates the innovations advanced by RUBICON in each of these fronts before describing how the resulting techniques have been integrated and applied to a smart home scenario. The resulting system is able to provide useful services and pro-actively assist the users in their activities. RUBICON learns through an incremental and progressive approach driven by the feed- back received from its own activities and from the user, while also self-organizing the manner in which it uses available sensors, actuators and other functional components in the process. This paper summarises some of the lessons learned by adopting such an approach and outlines promising directions for future work
Efficient Information Access in Data-Intensive Sensor Networks
Recent advances in wireless communications and microelectronics have enabled wide deployment of smart sensor networks. Such networks naturally apply to a broad range of applications that involve system monitoring and information tracking (e.g., fine-grained weather/environmental monitoring, structural health monitoring, urban-scale traffic or parking monitoring, gunshot detection, monitoring volcanic eruptions, measuring rate of melting glaciers, forest fire detection, emergency medical care, disaster response, airport security infrastructure, monitoring of children in metropolitan areas, product transition in warehouse networks etc.).Meanwhile, existing wireless sensor networks (WSNs) perform poorly when the applications have high bandwidth needs for data transmission and stringent delay constraints against the network communication. Such requirements are common for Data Intensive Sensor Networks (DISNs) implementing Mission-Critical Monitoring applications (MCM applications).We propose to enhance existing wireless network standards with flexible query optimization strategies that take into account network constraints and application-specific data delivery patterns in order to meet high performance requirements of MCM applications.In this respect, this dissertation has two major contributions: First, we have developed an algebraic framework called Data Transmission Algebra (DTA) for collision-aware concurrent data transmissions. Here, we have merged the serialization concept from the databases with the knowledge of wireless network characteristics. We have developed an optimizer that uses the DTA framework, and generates an optimal data transmission schedule with respect to latency, throughput, and energy usage. We have extended the DTA framework to handle location-based trust and sensor mobility. We improved DTA scalability with Whirlpool data delivery mechanism, which takes advantage of partitioning of the network. Second, we propose relaxed optimization strategy and develop an adaptive approach to deliver data in data-intensive wireless sensor networks. In particular, we have shown that local actions at nodes help network to adapt in worse network conditions and perform better. We show that local decisions at the nodes can converge towards desirable global network properties e.g.,high packet success ratio for the network. We have also developed a network monitoring tool to assess the state and dynamic convergence of the WSN, and force it towards better performance
The Sensor Network Workbench: Towards Functional Specification, Verification and Deployment of Constrained Distributed Systems
As the commoditization of sensing, actuation and communication hardware increases, so does the potential for dynamically tasked sense and respond networked systems (i.e., Sensor Networks or SNs) to replace existing disjoint and inflexible special-purpose deployments (closed-circuit security video, anti-theft sensors, etc.). While various solutions have emerged to many individual SN-centric challenges (e.g., power management, communication protocols, role assignment), perhaps the largest remaining obstacle to widespread SN deployment is that those who wish to deploy, utilize, and maintain a programmable Sensor Network lack the programming and systems expertise to do so.
The contributions of this thesis centers on the design, development and deployment of the SN Workbench (snBench). snBench embodies an accessible, modular programming platform coupled with a flexible and extensible run-time system that, together, support the entire life-cycle of distributed sensory services. As it is impossible to find a one-size-fits-all programming interface, this work advocates the use of tiered layers of abstraction that enable a variety of high-level, domain specific languages to be compiled to a common (thin-waist) tasking language; this common tasking language is statically verified and can be subsequently re-translated, if needed, for execution on a wide variety of hardware platforms.
snBench provides: (1) a common sensory tasking language (Instruction Set Architecture) powerful enough to express complex SN services, yet simple enough to be executed by highly constrained resources with soft, real-time constraints, (2) a prototype high-level language (and corresponding compiler) to illustrate the utility of the common tasking language and the tiered programming approach in this domain, (3) an execution environment and a run-time support infrastructure that abstract a collection of heterogeneous resources into a single virtual Sensor Network, tasked via this common tasking language, and (4) novel formal methods (i.e., static analysis techniques) that verify safety properties and infer implicit resource constraints to facilitate resource allocation for new services. This thesis presents these components in detail, as well as two specific case-studies: the use of snBench to integrate physical and wireless network security, and the use of snBench as the foundation for semester-long student projects in a graduate-level Software Engineering course
Reducing Communication Delay Variability for a Group of Robots
A novel architecture is presented for reducing communication delay variability for a group of robots. This architecture relies on using three components: a microprocessor architecture that allows deterministic real-time tasks; an event-based communication protocol in which nodes transmit in a TDMA fashion, without the need of global clock synchronization techniques; and a novel communication scheme that enables deterministic communications by allowing senders to transmit without regard for the state of the medium or coordination with other senders, and receivers can tease apart messages sent simultaneously with a high probability of success. This approach compared to others, allows simultaneous communications without regard for the state of the transmission medium, it allows deterministic communications, and it enables ordered communications that can be a applied in a team of robots. Simulations and experimental results are also included
- …