16,702 research outputs found
Quadraphase demodulation
A received, suppressed carrier, quadraphase shift key modulated (QPSK)signal is demodulated with a phase locked loop including a variable frequency, coherent reference that drives first and second channels also responsive to the QPSK signal. The channels respectively derive first and second replicas of binary signals that modulated the suppressed carrier. The replicas are combined to derive a variable amplitude error signal for controlling the coherent reference frequency. The frequency of the coherent reference is dithered at a low rate so that there is derived a relatively low level tracking error phase from the locked loop. The frequency of the coherent reference is swept when the phase of the error signal differs from the dithering phase by a predetermined value that is appreciably less than 90 degrees
Fiber-optic three axis magnetometer prototype development
The goal of this research program was to develop a high sensitivity, fiber optic, interferometric, three-axis magnetometer for interplanetary spacecraft applications. Dynamics Technology, Inc. (DTI) has successfully integrated a low noise, high bandwidth interferometer with high sensitivity metallic glass transducers. Also, DTI has developed sophisticated signal processing electronics and complete data acquisition, filtering, and display software. The sensor was packaged in a compact, low power and weight unit which facilitates deployment. The magnetic field sensor had subgamma sensitivity and a dynamic range of 10(exp 5) gamma in a 10 Hz bandwidth. Furthermore, the vector instrument exhibited the lowest noise level when only one axis was in operation. A system noise level of 1 gamma rms was observed in a 1 Hz bandwidth. However, with the other two channels operating, the noise level increased by about one order of magnitude. Higher system noise was attributed to cross-channel interference among the dither fields
Stabilized high-power laser system for the gravitational wave detector advanced LIGO
An ultra-stable, high-power cw Nd:YAG laser system, developed for the ground-based gravitational wave detector Advanced LIGO (Laser Interferometer Gravitational-Wave Observatory), was comprehensively characterized. Laser power, frequency, beam pointing and beam quality were simultaneously stabilized using different active and passive schemes. The output beam, the performance of the stabilization, and the cross-coupling between different stabilization feedback control loops were characterized and found to fulfill most design requirements. The employed stabilization schemes and the achieved performance are of relevance to many high-precision optical experiments
Points, Walls and Loops in Resonant Oscillatory Media
In an experiment of oscillatory media, domains and walls are formed under the
parametric resonance with a frequency double the natural one. In this bi-stable
system, %phase jumps by crossing walls. a nonequilibrium transition from
Ising wall to Bloch wall consistent with prediction is confirmed
experimentally. The Bloch wall moves in the direction determined by its
chirality with a constant speed. As a new type of moving structure in
two-dimension, a traveling loop consisting of two walls and Neel points is
observed.Comment: 9 pages (revtex format) and 6 figures (PostScript
Analysis and equalization of data-dependent jitter
Data-dependent jitter limits the bit-error rate (BER) performance of broadband communication systems and aggravates synchronization in phase- and delay-locked loops used for data recovery. A method for calculating the data-dependent jitter in broadband systems from the pulse response is discussed. The impact of jitter on conventional clock and data recovery circuits is studied in the time and frequency domain. The deterministic nature of data-dependent jitter suggests equalization techniques suitable for high-speed circuits. Two equalizer circuit implementations are presented. The first is a SiGe clock and data recovery circuit modified to incorporate a deterministic jitter equalizer. This circuit demonstrates the reduction of jitter in the recovered clock. The second circuit is a MOS implementation of a jitter equalizer with independent control of the rising and falling edge timing. This equalizer demonstrates improvement of the timing margins that achieve 10/sup -12/ BER from 30 to 52 ps at 10 Gb/s
Simple piezoelectric-actuated mirror with 180 kHz servo bandwidth
We present a high bandwidth piezoelectric-actuated mirror for length
stabilization of an optical cavity. The actuator displays a transfer function
with a flat amplitude response and greater than 135 phase margin up to
200 kHz, allowing a 180 kHz unity gain frequency to be achieved in a closed
servo loop. To the best of our knowledge, this actuator has achieved the
largest servo bandwidth for a piezoelectric transducer (PZT). The actuator
should be very useful in a wide variety of applications requiring precision
control of optical lengths, including laser frequency stabilization, optical
interferometers, and optical communications
Attosecond Precision Multi-km Laser-Microwave Network
Synchronous laser-microwave networks delivering attosecond timing precision
are highly desirable in many advanced applications, such as geodesy,
very-long-baseline interferometry, high-precision navigation and
multi-telescope arrays. In particular, rapidly expanding photon science
facilities like X-ray free-electron lasers and intense laser beamlines require
system-wide attosecond-level synchronization of dozens of optical and microwave
signals up to kilometer distances. Once equipped with such precision, these
facilities will initiate radically new science by shedding light on molecular
and atomic processes happening on the attosecond timescale, such as
intramolecular charge transfer, Auger processes and their impact on X-ray
imaging. Here, we present for the first time a complete synchronous
laser-microwave network with attosecond precision, which is achieved through
new metrological devices and careful balancing of fiber nonlinearities and
fundamental noise contributions. We demonstrate timing stabilization of a
4.7-km fiber network and remote optical-optical synchronization across a 3.5-km
fiber link with an overall timing jitter of 580 and 680 attoseconds RMS,
respectively, for over 40 hours. Ultimately we realize a complete
laser-microwave network with 950-attosecond timing jitter for 18 hours. This
work can enable next-generation attosecond photon-science facilities to
revolutionize many research fields from structural biology to material science
and chemistry to fundamental physics.Comment: 42 pages, 13 figure
Fast autotuning of a hydrogen maser by cavity Q modulation
A new fast autotuner for the hydrogen maser was implemented. By modulating the cavity, a phase shift in the maser output signal is induced which is proportional to the cavity tuning error. The phase shift is detected and fed back to a varactor tuner to stabilize the cavity against long-term drifts. Also, a PIN-diode cavity modulator which gives no incidental frequency shift over a very wide range of operation was developed. Modulated at over 200 Hz, it allows variations in maser cavity frequency to be compensated with a loop gain greater than 1000. Compensation of incidental amplitude modulation of the output was demonstrated
- …