2,634 research outputs found
An Experimental Study of Reduced-Voltage Operation in Modern FPGAs for Neural Network Acceleration
We empirically evaluate an undervolting technique, i.e., underscaling the
circuit supply voltage below the nominal level, to improve the power-efficiency
of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable
Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing
faults due to excessive circuit latency increase. We evaluate the
reliability-power trade-off for such accelerators. Specifically, we
experimentally study the reduced-voltage operation of multiple components of
real FPGAs, characterize the corresponding reliability behavior of CNN
accelerators, propose techniques to minimize the drawbacks of reduced-voltage
operation, and combine undervolting with architectural CNN optimization
techniques, i.e., quantization and pruning. We investigate the effect of
environmental temperature on the reliability-power trade-off of such
accelerators. We perform experiments on three identical samples of modern
Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification
CNN benchmarks. This approach allows us to study the effects of our
undervolting technique for both software and hardware variability. We achieve
more than 3X power-efficiency (GOPs/W) gain via undervolting. 2.6X of this gain
is the result of eliminating the voltage guardband region, i.e., the safe
voltage region below the nominal level that is set by FPGA vendor to ensure
correct functionality in worst-case environmental and circuit conditions. 43%
of the power-efficiency gain is due to further undervolting below the
guardband, which comes at the cost of accuracy loss in the CNN accelerator. We
evaluate an effective frequency underscaling technique that prevents this
accuracy loss, and find that it reduces the power-efficiency gain from 43% to
25%.Comment: To appear at the DSN 2020 conferenc
LEGaTO: first steps towards energy-efficient toolset for heterogeneous computing
LEGaTO is a three-year EU H2020 project which started in December 2017. The LEGaTO project will leverage task-based programming models to provide a software ecosystem for Made-in-Europe heterogeneous hardware composed of CPUs, GPUs, FPGAs and dataflow engines. The aim is to attain one order of magnitude energy savings from the edge to the converged cloud/HPC.Peer ReviewedPostprint (author's final draft
Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems
With the increasing digital services demand, performance and power-efficiency
become vital requirements for digital circuits and systems. However, the
enabling CMOS technology scaling has been facing significant challenges of
device uncertainties, such as process, voltage, and temperature variations. To
ensure system reliability, worst-case corner assumptions are usually made in
each design level. However, the over-pessimistic worst-case margin leads to
unnecessary power waste and performance loss as high as 2.2x. Since
optimizations are traditionally confined to each specific level, those safe
margins can hardly be properly exploited.
To tackle the challenge, it is therefore advised in this Ph.D. thesis to
perform a cross-layer optimization for digital signal processing circuits and
systems, to achieve a global balance of power consumption and output quality.
To conclude, the traditional over-pessimistic worst-case approach leads to
huge power waste. In contrast, the adaptive voltage scaling approach saves
power (25% for the CORDIC application) by providing a just-needed supply
voltage. The power saving is maximized (46% for CORDIC) when a more aggressive
voltage over-scaling scheme is applied. These sparsely occurred circuit errors
produced by aggressive voltage over-scaling are mitigated by higher level error
resilient designs. For functions like FFT and CORDIC, smart error mitigation
schemes were proposed to enhance reliability (soft-errors and timing-errors,
respectively). Applications like Massive MIMO systems are robust against lower
level errors, thanks to the intrinsically redundant antennas. This property
makes it applicable to embrace digital hardware that trades quality for power
savings.Comment: 190 page
Challenges and Opportunities in Near-Threshold DNN Accelerators around Timing Errors
AI evolution is accelerating and Deep Neural Network (DNN) inference accelerators are at the forefront of ad hoc architectures that are evolving to support the immense throughput required for AI computation. However, much more energy efficient design paradigms are inevitable to realize the complete potential of AI evolution and curtail energy consumption. The Near-Threshold Computing (NTC) design paradigm can serve as the best candidate for providing the required energy efficiency. However, NTC operation is plagued with ample performance and reliability concerns arising from the timing errors. In this paper, we dive deep into DNN architecture to uncover some unique challenges and opportunities for operation in the NTC paradigm. By performing rigorous simulations in TPU systolic array, we reveal the severity of timing errors and its impact on inference accuracy at NTC. We analyze various attributes—such as data–delay relationship, delay disparity within arithmetic units, utilization pattern, hardware homogeneity, workload characteristics—and uncover unique localized and global techniques to deal with the timing errors in NTC
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
An experimental study of reduced-voltage operation in modern FPGAs for neural network acceleration
We empirically evaluate an undervolting technique, i.e., underscaling the circuit supply voltage below the nominal level, to improve the power-efficiency of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing faults due to excessive circuit latency increase. We evaluate the reliability-power trade-off for such accelerators. Specifically, we experimentally study the reduced-voltage operation of multiple components of real FPGAs, characterize the corresponding reliability behavior of CNN accelerators, propose techniques to minimize the drawbacks of reduced-voltage operation, and combine undervolting with architectural CNN optimization techniques, i.e., quantization and pruning. We investigate the effect ofenvironmental temperature on the reliability-power trade-off of such accelerators. We perform experiments on three identical samples of modern Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification CNN benchmarks. This approach allows us to study the effects of our undervolting technique for both software and hardware variability. We achieve more than 3X power-efficiency (GOPs/W ) gain via undervolting. 2.6X of this gain is the result of eliminating the voltage guardband region, i.e., the safe voltage region below the nominal level that is set by FPGA vendor to ensure correct functionality in worst-case environmental and circuit conditions. 43% of the power-efficiency gain is due to further undervolting below the guardband, which comes at the cost of accuracy loss in the CNN accelerator. We evaluate an effective frequency underscaling technique that prevents this accuracy loss, and find that it reduces the power-efficiency gain from 43% to 25%.The work done for this paper was partially supported by a HiPEAC Collaboration Grant funded by the H2020 HiPEAC Project under grant agreement No. 779656. The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the LEGaTO Project (www.legato-project.eu), grant agreement No. 780681.Peer ReviewedPostprint (author's final draft
MoRS: An approximate fault modelling framework for reduced-voltage SRAMs
On-chip memory (usually based on Static RAMs-SRAMs) are crucial components for various computing devices including heterogeneous devices, e.g, GPUs, FPGAs, ASICs to achieve high performance. Modern workloads such as Deep Neural Networks (DNNs) running on these heterogeneous fabrics are highly dependent on the on-chip memory architecture for efficient acceleration. Hence, improving the energy-efficiency of such memories directly leads to an efficient system. One of the common methods to save energy is undervolting i.e., supply voltage underscaling below the nominal level. Such systems can be safely undervolted without incurring faults down to a certain voltage limit. This safe range is also called voltage guardband. However, reducing voltage below the guardband level without decreasing frequency causes timing-based faults. In this paper, we propose MoRS, a framework that generates the first approximate undervolting fault model using real faults extracted from experimental undervolting studies on SRAMs to build the model. We inject the faults generated by MoRS into the on-chip memory of the DNN accelerator to evaluate the resilience of the system under the test. MoRS has the advantage of simplicity without any need for high-time overhead experiments while being accurate enough in comparison to a fully randomly-generated fault injection approach. We evaluate our experiment in popular DNN workloads by mapping weights to SRAMs and measure the accuracy difference between the output of the MoRS and the real data. Our results show that the maximum difference between real fault data and the output fault model of MoRS is 6.21%, whereas the maximum difference between real data and random fault injection model is 23.2%. In terms of average proximity to the real data, the output of MoRS outperforms the random fault injection approach by 3.21x.This work is partially funded by Open Transprecision Computing (OPRECOM) project, Summer of Code 2020.Peer ReviewedPostprint (author's final draft
MoRS: An approximate fault modelling framework for reduced-voltage SRAMs
On-chip memory (usually based on Static RAMs-SRAMs) are crucial components for various computing devices including heterogeneous devices, e.g, GPUs, FPGAs, ASICs to achieve high performance. Modern workloads such as Deep Neural Networks (DNNs) running on these heterogeneous fabrics are highly dependent on the on-chip memory architecture for efficient acceleration. Hence, improving the energy-efficiency of such memories directly leads to an efficient system. One of the common methods to save energy is undervolting i.e., supply voltage underscaling below the nominal level. Such systems can be safely undervolted without incurring faults down to a certain voltage limit. This safe range is also called voltage guardband. However, reducing voltage below the guardband level without decreasing frequency causes timing-based faults. In this paper, we propose MoRS, a framework that generates the first approximate undervolting fault model using real faults extracted from experimental undervolting studies on SRAMs to build the model. We inject the faults generated by MoRS into the on-chip memory of the DNN accelerator to evaluate the resilience of the system under the test. MoRS has the advantage of simplicity without any need for high-time overhead experiments while being accurate enough in comparison to a fully randomly-generated fault injection approach. We evaluate our experiment in popular DNN workloads by mapping weights to SRAMs and measure the accuracy difference between the output of the MoRS and the real data. Our results show that the maximum difference between real fault data and the output fault model of MoRS is 6.21%, whereas the maximum difference between real data and random fault injection model is 23.2%. In terms of average proximity to the real data, the output of MoRS outperforms the random fault injection approach by 3.21x.This work is partially funded by Open Transprecision Computing (OPRECOM) project, Summer of Code 2020.Peer ReviewedPostprint (author's final draft
- …