Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

Radar Detection, Tracking and Identification for UAV Sense and Avoid Applications

Advances in Unmanned Aerial Vehicle (UAV) technology have enabled wider access for the general public leading to more stringent flight regulations, such as the line of sight restriction, for hobbyists and commercial applications. Improving sensor technology for Sense And Avoid (SAA) systems is currently a major research area in the unmanned vehicle community. This thesis overviews efforts made to advance intelligent algorithms used to detect, track, and identify commercial UAV targets by enabling rapid prototyping of novel radar techniques such as micro-Doppler radar target identification or cognitive radar. To enable empirical radar signal processing evaluations, an S-Band and X-Band frequency modulated, software-defined radar testbed is designed, implemented, and evaluated with field measurements. The final evaluations provide proof of functionality, performance measurements, and limitations of this testbed and future software-defined radars. The testbed is comprised of open-source software and hardware meant to accelerate the development of a reliable, repeatable, and scalable SAA system for the wide range of new and existing UAVs

Modelling, Simulation and Data Analysis in Acoustical Problems

Modelling and simulation in acoustics is currently gaining importance. In fact, with the development and improvement of innovative computational techniques and with the growing need for predictive models, an impressive boost has been observed in several research and application areas, such as noise control, indoor acoustics, and industrial applications. This led us to the proposal of a special issue about “Modelling, Simulation and Data Analysis in Acoustical Problems”, as we believe in the importance of these topics in modern acoustics’ studies. In total, 81 papers were submitted and 33 of them were published, with an acceptance rate of 37.5%. According to the number of papers submitted, it can be affirmed that this is a trending topic in the scientific and academic community and this special issue will try to provide a future reference for the research that will be developed in coming years

Concealed Explosives Detection using Swept Millimetre Waves

The aim of this project is to develop a system for the stand-o detection (typically ten metres) of concealed body-worn explosives. The system must be capable of detecting a layer of explosive material hidden under clothing and distinguishing explosives from everyday objects. Millimetre wave radar is suitable for this application. Millimetre Waves are suitable because they are not signi cantly attenuated by atmospheric con- ditions and clothing textiles are practically transparent to this radiation. Detection of explosive layers from a few mm in thickness to a few cm thickness is required. A quasi optical focussing element is required to provide su cient antenna directivity to form a narrow, highly directional beam of millimetre waves, which can be directed and scanned over the person being observed. A system of antennae and focussing optics has been modelled and built using designs from nite element analysis (FEA) software. Using the developed system, represen- tative data sets have been acquired using a Vector Network Analyser (VNA) to act as transmitter and receiver, with the data saved for processing at a later time. A novel data analysis algorithm using Matlab has been developed to carry out Fourier Transforms of the data and then perform pattern matching techniques using arti cial neural networks (ANN's). New ways of aligning and sorting data have been found using cross-correlation to order the data by similar data slices and then sorting the data by amplitude to take the strongest 50% of data sets. The signi cant contribution to knowledge of this project will be a system which can be eld tested and which will detect a layer of dielectric at a stando distance, typically of ten metres, and signal processing algorithms which can recognise the di erence 17 between the response of threat and non-threat objects. This has partially been achieved by the development of focussing optics to acquire data sets which have then been aligned by cross-correlation, sorted and then used to train a pattern matching technique using neural networks. This technique has shown good results in di erentiating between a person wearing simulated explosives and a person not carrying simulated explosives. Further work for this project includes acquiring more data sets of everyday objects and training the neural network to distinguish between threat objects and non-threat objects. The operational range also needs increasing using either a larger aperture optical element or a similarly sized Cassegrain antenna. The system needs adapting for real time use with the data processing techniques developed in Matlab. The VNA is operated over a band of 14 to 40 GHz, future work includes moving to a stand-alone transmitter and receiver operating at w-band (75 to 110 GHz)

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Computational Optimizations for Machine Learning

The present book contains the 10 articles finally accepted for publication in the Special Issue “Computational Optimizations for Machine Learning” of the MDPI journal Mathematics, which cover a wide range of topics connected to the theory and applications of machine learning, neural networks and artificial intelligence. These topics include, among others, various types of machine learning classes, such as supervised, unsupervised and reinforcement learning, deep neural networks, convolutional neural networks, GANs, decision trees, linear regression, SVM, K-means clustering, Q-learning, temporal difference, deep adversarial networks and more. It is hoped that the book will be interesting and useful to those developing mathematical algorithms and applications in the domain of artificial intelligence and machine learning as well as for those having the appropriate mathematical background and willing to become familiar with recent advances of machine learning computational optimization mathematics, which has nowadays permeated into almost all sectors of human life and activity

GEONAVPOS: Seminar publications on Geodesy, Navigation and Positioning

Modern geodesy may be defined as "the science of precise georeferencing and change monitoring on or above the Earth’s surface". Modern geodesy relies on space technology and integrates complex Earth observation systems and modelling of geospatial data at higher accuracy in order to understand and predict how the solid Earth, atmosphere, and oceans work as a system. Modern geodesy applications include precise determination of position and velocity of points on the surface of the Earth, precise determination of the shape and changes of the Earth’s ocean and land surfaces, or precise mapping of the spatial and temporal features of the gravity field. Navigation and geodesy relate both on positioning (location) information. Although a connecting element, positioning also makes the difference between navigation and geodesy. In navigation, the positioning information is required instantaneously or almost instantaneously with a certain latency (real-time). On the other hand, in traditional geodesy the position information is obtained post-mission after post-processing calculations. Usually, these calculations are carried out under the assumption that the points are fixed or undergo a very slow movement. However, in navigation, the points are variable, therefore time dependent. The Maa-6.3255 Seminar on Geodesy, Navigation and Positioning is offered to both master and doctoral students of Aalto University. The seminar builds on active participation between the theory and practice, using a student-centred approach for teaching. This publication consists of the best 12 student works prepared by the seminar participants (i.e., 24 students) during 2011-2013: (01) Post-glacial rebound: modelling, measurement, significance on society (02) The Current State of GPS Meteorology and Climatology (03) Matlab Application in VLBI Data Analysis (04) Science Network GNSS-verkon tasoitus ja antennikorkeuden ja - tyypinvaikutus koordinaatteihin (05) Koordinaattien laskenta Precise Point Positioning – menetelmällä (06) GOCE User Toolboxin käyttö Itämeren meritopografian visualisoinnissa (07) GNSS – Risks and threats (08) Global Navigation: Introduction to Satellite Based Augmentation System over Indian Region (09) Positioning Techniques of Modern Smartphones (10) Hybrid Positioning with a Smartphone (11) Dexter Industries GPS sensor for Lego Mindstorms NXT (12) GPS Wildlife Trackin

Sonar attentive underwater navigation in structured environment

One of the fundamental requirements of a persistently Autonomous Underwater Vehicle (AUV) is a robust navigation system. The success of most complex robotic tasks depends on the accuracy of a vehicle’s navigation system. In a basic form, an AUV estimates its position using an on-board navigation sensors through Dead-Reckoning (DR). However DR navigation systems tends to drift in the long run due to accumulated measurement errors. One way of mitigating this problem require the use of Simultaneous Localization and Mapping (SLAM) by concurrently mapping external environment features. The performance of a SLAM navigation system depends on the availability of enough good features in the environment. On the contrary, a typical underwater structured environment (harbour, pier or oilfield) has a limited amount of sonar features in a limited locations, hence exploitation of good features is a key for effective underwater SLAM. This thesis develops a novel attentive sonar line feature based SLAM framework that improves the performance of a SLAM navigation by steering a multibeam sonar sensor,which is mounted on a pan and tilt unit, towards feature-rich regions of the environment. A sonar salience map is generated at each vehicle pose to identify highly informative and stable regions of the environment. Results from a simulated test and real AUV experiment show an attentive SLAM performs better than a passive counterpart by repeatedly visiting good sonar landmarks