Layout regularity metric as a fast indicator of process variations

Integrated circuits design faces increasing challenge as we scale down due to the increase of the effect of sensitivity to process variations. Systematic variations induced by different steps in the lithography process affect both parametric and functional yields of the designs. These variations are known, themselves, to be affected by layout topologies. Design for Manufacturability (DFM) aims at defining techniques that mitigate variations and improve yield. Layout regularity is one of the trending techniques suggested by DFM to mitigate process variations effect. There are several solutions to create regular designs, like restricted design rules and regular fabrics. These regular solutions raised the need for a regularity metric. Metrics in literature are insufficient for different reasons; either because they are qualitative or computationally intensive. Furthermore, there is no study relating either lithography or electrical variations to layout regularity. In this work, layout regularity is studied in details and a new geometrical-based layout regularity metric is derived. This metric is verified against lithographic simulations and shows good correlation. Calculation of the metric takes only few minutes on 1mm x 1mm design, which is considered fast compared to the time taken by simulations. This makes it a good candidate for pre-processing the layout data and selecting certain areas of interest for lithographic simulations for faster throughput. The layout regularity metric is also compared against a model that measures electrical variations due to systematic lithographic variations. The validity of using the regularity metric to flag circuits that have high variability using the developed electrical variations model is shown. The regularity metric results compared to the electrical variability model results show matching percentage that can reach 80%, which means that this metric can be used as a fast indicator of designs more susceptible to lithography and hence electrical variations

トランジスタ・アレイ方式に基づくアナログレイアウトにおける密度最適化

In integrated circuit design of advanced technology nodes, layout density uniformity significantly influences the manufacturability due to the CMP variability. In analog design, especially, designers are suffering from passing the density checking since there are few useful tools. To tackle this issue, we focus on a transistor-array(TA)-style analog layout, and propose a density optimization algorithm consistent with complicated design rules. Based on TA-style, we introduce a density-aware layout format to explicitly control the layout pattern density, and provide the mathematical optimization approach. Hence, a design flow incorporating our density optimization can drastically reduce the design time with fewer iterations. In a design case of an OPAMP layout in a 65nm CMOS process, the result demonstrates that the proposed approach achieves more than 48× speed-up compared with conventional manual layout, meanwhile, it shows a good circuit performance in the post-layout simulation.北九州市立大

Improved Physical Design for Manufacturing Awareness and Advanced VLSI

Increasing challenges arise with each new semiconductor technology node, especially in advanced nodes, where the industry tries to extract every ounce of benefit as it approaches the limits of physics, through manufacturing-aware design technology co-optimization and design-based equivalent scaling. The increasing complexity of design and process technologies, and ever-more complex design rules, also become hurdles for academic researchers, separating academic researchers from the most up-to-date technical issues.This thesis presents innovative methodologies and optimizations to address the above challenges. There are three directions in this thesis: (i) manufacturing-aware design technology co-optimization; (ii) advanced node design-based equivalent scaling; and (iii) an open source academic detailed routing flow.To realize manufacturing-aware design technology co-optimization, this thesis presents two works: (i) a multi-row detailed placement optimization for neighbor diffusion effect mitigation between neighboring standard cells; and (ii) a post-routing optimization to generate 2D block mask layout for dummy segment removal in self-aligned multiple patterning.To achieve advanced node design-based equivalent scaling, this thesis presents two improved physical design methodologies: (i) a post-placement flop tray generation approach for clock power reduction; and (ii) a detailed placement approach to exploit inter-row M1 routing for congestion and wirelength reduction.To address the increasing gap between academia and industry, this thesis presents two works toward an open source academic detailed routing flow: (i) a complete, robust, scalable and design ruleaware dynamic programming-based pin access analysis framework; and (ii) TritonRoute – the open source detailed router that is capable of delivering DRC-clean detailed routing solutions in advanced nodes.This thesis concludes with a summary of its contributions and open directions for future research

Advanced analog layout design automation in compliance with density uniformity

To fabricate a reliable integrated circuit chip, foundries follow specific design rules and layout processing techniques. One of the parameters, which affect circuit performance and final electronic product quality, is the variation of thickness for each semiconductor layer within the fabricated chips. The thickness is closely dependent on the density of geometric features on that layer. Therefore, to ensure consistent thickness, foundries normally have to seriously control distribution of the feature density on each layer by using post-processing operations. In this research, the methods of controlling feature density distribution on different layers of an analog layout during the process of layout migration from an old technology to a new one or updated design specifications in the same technology have been investigated. We aim to achieve density-uniformity-aware layout retargeting for facilitating manufacturing process in the advanced technologies. This can offer an advantage right to the design stage for the designers to evaluate the effects of applying density uniformity to their drafted layouts, which are otherwise usually done by the foundries at the final manufacturing stage without considering circuit performance. Layout modification for density uniformity includes component position change and size modification, which may induce crosstalk noise caused by extra parasitic capacitance. To effectively control this effect, we have also investigated and proposed a simple yet accurate analytic method to model the parasitic capacitance on multi-layer VLSI chips. Supported by this capacitance modeling research, a unique methodology to deal with density-uniformity-aware analog layout retargeting with the capability of parasitic capacitance control has been presented. The proposed operations include layout geometry position rearrangement, interconnect size modification, and extra dummy fill insertion for enhancing layout density uniformity. All of these operations are holistically coordinated by a linear programming optimization scheme. The experimental results demonstrate the efficacy of the proposed methodology compared to the popular digital solutions in terms of minimum density variation and acute parasitic capacitance control

DFM Techniques for the Detection and Mitigation of Hotspots in Nanometer Technology

With the continuous scaling down of dimensions in advanced technology nodes, process variations are getting worse for each new node. Process variations have a large influence on the quality and yield of the designed and manufactured circuits. There is a growing need for fast and efficient techniques to characterize and mitigate the effects of different sources of process variations on the design's performance and yield. In this thesis we have studied the various sources of systematic process variations and their effects on the circuit, and the various methodologies to combat systematic process variation in the design space. We developed abstract and accurate process variability models, that would model systematic intra-die variations. The models convert the variation in process into variation in electrical parameters of devices and hence variation in circuit performance (timing and leakage) without the need for circuit simulation. And as the analysis and mitigation techniques are studied in different levels of the design ow, we proposed a flow for combating the systematic process variation in nano-meter CMOS technology. By calculating the effects of variability on the electrical performance of circuits we can gauge the importance of the accurate analysis and model-driven corrections. We presented an automated framework that allows the integration of circuit analysis with process variability modeling to optimize the computer intense process simulation steps and optimize the usage of variation mitigation techniques. And we used the results obtained from using this framework to develop a relation between layout regularity and resilience of the devices to process variation. We used these findings to develop a novel technique for fast detection of critical failures (hotspots) resulting from process variation. We showed that our approach is superior to other published techniques in both accuracy and predictability. Finally, we presented an automated method for fixing the lithography hotspots. Our method showed success rate of 99% in fixing hotspots

Techniques for Improving Security and Trustworthiness of Integrated Circuits

The integrated circuit (IC) development process is becoming increasingly vulnerable to malicious activities because untrusted parties could be involved in this IC development flow. There are four typical problems that impact the security and trustworthiness of ICs used in military, financial, transportation, or other critical systems: (i) Malicious inclusions and alterations, known as hardware Trojans, can be inserted into a design by modifying the design during GDSII development and fabrication. Hardware Trojans in ICs may cause malfunctions, lower the reliability of ICs, leak confidential information to adversaries or even destroy the system under specifically designed conditions. (ii) The number of circuit-related counterfeiting incidents reported by component manufacturers has increased significantly over the past few years with recycled ICs contributing the largest percentage of the total reported counterfeiting incidents. Since these recycled ICs have been used in the field before, the performance and reliability of such ICs has been degraded by aging effects and harsh recycling process. (iii) Reverse engineering (RE) is process of extracting a circuit’s gate-level netlist, and/or inferring its functionality. The RE causes threats to the design because attackers can steal and pirate a design (IP piracy), identify the device technology, or facilitate other hardware attacks. (iv) Traditional tools for uniquely identifying devices are vulnerable to non-invasive or invasive physical attacks. Securing the ID/key is of utmost importance since leakage of even a single device ID/key could be exploited by an adversary to hack other devices or produce pirated devices. In this work, we have developed a series of design and test methodologies to deal with these four challenging issues and thus enhance the security, trustworthiness and reliability of ICs. The techniques proposed in this thesis include: a path delay fingerprinting technique for detection of hardware Trojans, recycled ICs, and other types counterfeit ICs including remarked, overproduced, and cloned ICs with their unique identifiers; a Built-In Self-Authentication (BISA) technique to prevent hardware Trojan insertions by untrusted fabrication facilities; an efficient and secure split manufacturing via Obfuscated Built-In Self-Authentication (OBISA) technique to prevent reverse engineering by untrusted fabrication facilities; and a novel bit selection approach for obtaining the most reliable bits for SRAM-based physical unclonable function (PUF) across environmental conditions and silicon aging effects

Through-silicon-via-aware prediction and physical design for multi-granularity 3D integrated circuits

The main objective of this research is to predict the wirelength, area, delay, and power of multi-granularity three-dimensional integrated circuits (3D ICs), to develop physical design methodologies and algorithms for the design of multi-granularity 3D ICs, and to investigate the impact of through-silicon vias (TSVs) on the quality of 3D ICs. This dissertation supports these objectives by addressing six research topics. The first pertains to analytical models that predict the interconnects of multi-granularity 3D ICs, and the second focuses on the development of analytical models of the capacitive coupling of TSVs. The third and the fourth topics present design methodologies and algorithms for the design of gate- and block-level 3D ICs, and the fifth topic pertains to the impact of TSVs on the quality of 3D ICs. The final topic addresses topography variation in 3D ICs. The first section of this dissertation presents TSV-aware interconnect prediction models for multi-granularity 3D ICs. As previous interconnect prediction models for 3D ICs did not take TSV area into account, they were not capable of predicting many important characteristics of 3D ICs related to TSVs. This section will present several previous interconnect prediction models that have been improved so that the area occupied by TSVs is taken into account. The new models show numerous important predictions such as the existence of the number of TSVs minimizing wirelength. The second section presents fast estimation of capacitive coupling of TSVs and wires. Since TSV-to-TSV and TSV-to-wire coupling capacitance is dependent on their relative locations, fast estimation of the coupling capacitance of a TSV is essential for the timing optimization of 3D ICs. Simulation results show that the analytical models presented in this section are sufficiently accurate for use at various design steps that require the computation of TSV capacitance. The third and fourth sections present design methodologies and algorithms for gate- and block-level 3D ICs. One of the biggest differences in the design of 2D and 3D ICs is that the latter requires TSV insertion. Since no widely-accepted design methodology designates when, where, and how TSVs are inserted, this work develops and presents several design methodologies for gate- and block-level 3D ICs and physical design algorithms supporting them. Simulation results based on GDSII-level layouts validate the design methodologies and present evidence of their effectiveness. The fifth section explores the impact of TSVs on the quality of 3D ICs. As TSVs become smaller, devices are shrinking, too. Since the relative size of TSVs and devices is more critical to the quality of 3D ICs than the absolute size of TSVs and devices, TSVs and devices should be taken into account in the study of the impact of TSVs on the quality of 3D ICs. In this section, current and future TSVs and devices are combined to produce 3D IC layouts and the impact of TSVs on the quality of 3D ICs is investigated. The final section investigates topography variation in 3D ICs. Since landing pads fabricated in the bottommost metal layer are attached to TSVs, they are larger than TSVs, so they could result in serious topography variation. Therefore, topography variation, especially in the bottommost metal layer, is investigated and two layout optimization techniques are applied to a global placement algorithm that minimizes the topography variation of the bottommost metal layer of 3D ICs.PhDCommittee Chair: Lim, Sung Kyu; Committee Member: Bakir, Muhannad; Committee Member: Kim, Hyesoon; Committee Member: Lee, Hsien-Hsin Sean; Committee Member: Mukhopadhyay, Saiba

Electrical Design for Manufacturability Solutions: Fast Systematic Variation Analysis and Design Enhancement Techniques

The primary objectives in this research are to develop computer-aided design (CAD) tools for Design for Manufacturability (DFM) solutions that enable designers to conduct more rapid and more accurate systematic variation analysis, with different design enhancement techniques. Four main CAD tools are developed throughout my thesis. The first CAD tool facilitates a quantitative study of the impact of systematic variations for different circuits' electrical and geometrical behavior. This is accomplished by automatically performing an extensive analysis of different process variations (lithography and stress) and their dependency on the design context. Such a tool helps to explore and evaluate the systematic variation impact on any type of design. Secondly, solutions in the industry focus on the "design and then fix philosophy", or "fix during design philosophy", whereas the next CAD tool involves the "fix before design philosophy". Here, the standard cell library is characterized in different design contexts, different resolution enhancement techniques, and different process conditions, generating a fully DFM-aware standard cell library using a newly developed methodology that dramatically reduce the required number of silicon simulations. Several experiments are conducted on 65nm and 45nm designs, and demonstrate more robust and manufacturable designs that can be implemented by using the DFM-aware standard cell library. Thirdly, a novel electrical-aware hotspot detection solution is developed by using a device parameter-based matching technique since the state-of-the-art hotspot detection solutions are all geometrical based. This CAD tool proposes a new philosophy by detecting yield limiters, also known as hotspots, through the model parameters of the device, presented in the SPICE netlist. This novel hotspot detection methodology is tested and delivers extraordinary fast and accurate results. Finally, the existing DFM solutions, mainly address the digital designs. Process variations play an increasingly important role in the success of analog circuits. Knowledge of the parameter variances and their contribution patterns is crucial for a successful design process. This information is valuable to find solutions for many problems in design, design automation, testing, and fault tolerance. The fourth CAD solution, proposed in this thesis, introduces a variability-aware DFM solution that detects, analyze, and automatically correct hotspots for analog circuits