Mobile robot teleoperation through eye-gaze (telegaze)

In most teleoperation applications the human operator is required to monitor the status of the robot, as well as, issue controlling commands for the whole duration of the operation. Using a vision based feedback system, monitoring the robot requires the operator to look at a continuous stream of images displayed on an interaction screen. The eyes of the operator therefore, are fully engaged in monitoring and the hands in controlling. Since the eyes of the operator are engaged in monitoring anyway, inputs from their gaze can be used to aid in controlling. This frees the hands of the operator, either partially or fully, from controlling which can then be used to perform any other necessary tasks. However, the challenge here lies in distinguishing between the inputs that can be used for controlling and the inputs that can be used for monitoring. In mobile robot teleoperation, controlling is mainly composed of issuing locomotion commands to drive the robot. Monitoring on the other hand, is looking where the robot goes and looking for any obstacles in the route. Interestingly, there exist a strong correlation between human's gazing behaviours and their moving intentions. This correlation has been exploited in this thesis to investigate novel means for mobile robot teleoperation through eye-gaze, which has been named TeleGaze for short

From Concept to Market: Surgical Robot Development

Surgical robotics and supporting technologies have really become a prime example of modern applied information technology infiltrating our everyday lives. The development of these systems spans across four decades, and only the last few years brought the market value and saw the rising customer base imagined already by the early developers. This chapter guides through the historical development of the most important systems, and provide references and lessons learnt for current engineers facing similar challenges. A special emphasis is put on system validation, assessment and clearance, as the most commonly cited barrier hindering the wider deployment of a system

Learning to grasp in unstructured environments with deep convolutional neural networks using a Baxter Research Robot

Recent advancements in Deep Learning have accelerated the capabilities of robotic systems in terms of visual perception, object manipulation, automated navigation, and human-robot collaboration. The capability of a robotic system to manipulate objects in unstructured environments is becoming an increasingly necessary skill. Due to the dynamic nature of these environments, traditional methods, that require expert human knowledge, fail to adapt automatically. After reviewing the relevant literature a method was proposed to utilise deep transfer learning techniques to detect object grasps from coloured depth images. A grasp describes how a robotic end-effector can be arranged to securely grasp an object and successfully lift it without slippage. In this study, a ResNet-50 convolutional neural network (CNN) model is trained on the Cornell grasp dataset. The training was completed within 30 hours using a workstation PC with accelerated GPU support via an NVIDIA Titan X. The trained grasp detection model was further evaluated with a Baxter research robot and a Microsoft Kinect-v2 and a successful grasp detection accuracy of 93.91% was achieved on a diverse set of novel objects. Physical grasping trials were conducted on a set of 8 different objects. The overall system achieves an average grasp success rate of 65.0% while performing the grasp detection in under 25 milliseconds. The results analysis concluded that the objects with reasonably straight edges and moderately pronounced heights above the table are easily detected and grasped by the system

Autonomous Systems, Robotics, and Computing Systems Capability Roadmap: NRC Dialogue

Contents include the following: Introduction. Process, Mission Drivers, Deliverables, and Interfaces. Autonomy. Crew-Centered and Remote Operations. Integrated Systems Health Management. Autonomous Vehicle Control. Autonomous Process Control. Robotics. Robotics for Solar System Exploration. Robotics for Lunar and Planetary Habitation. Robotics for In-Space Operations. Computing Systems. Conclusion