Estimation and detection techniques for doubly-selective channels in wireless communications

A fundamental problem in communications is the estimation of the channel. The signal transmitted through a communications channel undergoes distortions so that it is often received in an unrecognizable form at the receiver. The receiver must expend significant signal processing effort in order to be able to decode the transmit signal from this received signal. This signal processing requires knowledge of how the channel distorts the transmit signal, i.e. channel knowledge. To maintain a reliable link, the channel must be estimated and tracked by the receiver. The estimation of the channel at the receiver often proceeds by transmission of a signal called the 'pilot' which is known a priori to the receiver. The receiver forms its estimate of the transmitted signal based on how this known signal is distorted by the channel, i.e. it estimates the channel from the received signal and the pilot. This design of the pilot is a function of the modulation, the type of training and the channel. [Continues.

Channel Estimation in Coded Modulation Systems

With the outstanding performance of coded modulation techniques in fading channels, much research efforts have been carried out on the design of communication systems able to operate at low signal-to-noise ratios (SNRs). From this perspective, the so-called iterative decoding principle has been applied to many signal processing tasks at the receiver: demodulation, detection, decoding, synchronization and channel estimation. Nevertheless, at low SNRs, conventional channel estimators do not perform satisfactorily. This thesis is mainly concerned with channel estimation issues in coded modulation systems where different diversity techniques are exploited to combat fading in single or multiple antenna systems. First, for single antenna systems in fast time-varying fading channels, the thesis focuses on designing a training sequence by exploiting signal space diversity (SSD). Motivated by the power/bandwidth efficiency of the SSD technique, the proposed training sequence inserts pilot bits into the coded bits prior to constellation mapping and signal rotation. This scheme spreads the training sequence during a transmitted codeword and helps the estimator to track fast variation of the channel gains. A comprehensive comparison between the proposed training scheme and the conventional training scheme is then carried out, which reveals several interesting conclusions with respect to both error performance of the system and mean square error of the channel estimator. For multiple antenna systems, different schemes are examined in this thesis for the estimation of block-fading channels. For typical coded modulation systems with multiple antennas, the first scheme makes a distinction between the iteration in the channel estimation and the iteration in the decoding. Then, the estimator begins iteration when the soft output of the decoder at the decoding iteration meets some specified reliability conditions. This scheme guarantees the convergence of the iterative receiver with iterative channel estimator. To accelerate the convergence process and decrease the complexity of successive iterations, in the second scheme, the channel estimator estimates channel state information (CSI) at each iteration with a combination of the training sequence and soft information. For coded modulation systems with precoding technique, in which a precoder is used after the modulator, the training sequence and data symbols are combined using a linear precoder to decrease the required training overhead. The power allocation and the placement of the training sequence to be precoded are obtained based on a lower bound on the mean square error of the channel estimation. It is demonstrated that considerable performance improvement is possible when the training symbols are embedded within data symbols with an equi-spaced pattern. In the last scheme, a joint precoder and training sequence is developed to maximize the achievable coding gain and diversity order under imperfect CSI. In particular, both the asymptotic performance behavior of the system with the precoded training scheme under imperfect CSI and the mean square error of the channel estimation are derived to obtain achievable diversity order and coding gain. Simulation results demonstrate that the joint optimized scheme outperforms the existing training schemes for systems with given precoders in terms of error rate and the amount of training overhead

Adaptive averaging channel estimation for DVB-T2 systems

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonIn modern communication systems, the rate of transmitted data is growing rapidly. This leads to the need for more sophisticated methods and techniques of implementation in every block of the transmitter-receiver chain. The weakest link in radio communications is the transmission channel. The signal, which is passed through it, suffers from many degrading factors like noise, attenuation, diffraction, scattering etc. In the receiver side, the modulated signal has to be restored to its initial state in order to extract the useful information. Assuming that the channel acts like a filter with finite impulse, one has to know its coefficients in order to apply the inverse function, which will restore the signal back to its initial state. The techniques which deal with this problem are called channel estimation. Noise is one of the causes that degrade the quality of the received signal. If it could be discarded, then the process of channel estimation would be easier. Transmitting special symbols, called pilots with known amplitude, phase and position to the receiver and assuming that the noise has zero mean, an averaging process could reduce the noise impact to the pilot amplitudes and thus simplify the channel estimation process. In this thesis, a novel channel estimation method based on noise rejection is introduced. The estimator takes into account the time variations of the channel and adapts its buffer size in order to achieve the best performance. Many configurations of the estimator were tested and at the beginning of the research fixed size estimators were tested. The fixed estimator has a very good performance for channels which could be considered as stationary in the time domain, like Additive White Gaussian Noise (AWGN) channels or slowly time-varying channels. AWGN channel is a channel model where the only distorting factor is the noise, where noise is every unwanted signal interfering with the useful signal. The properties of the noise are that it is additive, which means that the noise is superimposed on the transmitted signal, it is white so the power density is constant for all frequencies, and it has a Gaussian distribution in the time domain with zero mean and variance σ2=N. A slowly time varying channel refers to channel with coherence time larger than the transmitted symbol duration. The performance of a fixed size averaging estimator in case of fast time-varying channels is subject to the buffering time. When the buffering time is smaller or equal to a portion of the coherence time the averaging process offers better performance than the conventional estimation, but when the buffering time exceeds this portion of the coherence time the performance of the averaging process degrades fast. So, an extension has been made to the averaging estimator that estimates the Doppler shift and thus the coherence time, where the channel could be assumed as stationary. The improved estimator called Adaptive Averaging Channel Estimator (AACE) is capable to adjust its buffer size and thus to average only successive Orthogonal Frequency Division Multiplexing (OFDM) symbols that have the same channel distortions. The OFDM is a transmission method where instead of transmitting the data stream using only on carrier, the stream is divided into parallel sub-streams where the subcarriers conveying the sub-streams are orthogonal to each other. The use of the OFDM increases the symbol duration making it more robust against Inter-Symbol Interference (ISI), which the interference among successive transmitted symbols, and also divides the channel bandwidth into small sub-bandwidths preventing frequency selectivity because of the multipath nature of the radio channel. Simulations using the Rayleigh channel model were performed and the results clearly demonstrate the benefits of the AACE in the channel estimation process. The performance of the combination of AACE with Least Square estimation (AACE-LS) is superior to the conventional Least Square estimation especially for low Doppler shifts and it is close to the Linear Minimum Mean Square Error (LMMSE) estimation performance. Consequently, if the receiver has low computational resources and/or the channel statistics are unknown, then the AACE-LS estimator is a valid choice for modern radio receivers. Moreover, the proposed adaptive averaging process could be used in any OFDM system based on pilot aided channel estimation. In order to verify the superiority of the AACE algorithm, quantitative results are provided in terms of BER vs SNR. It is demonstrated that AACE-LS is 7dB more sensitive than the LS estimator

An Iterative Receiver for OFDM With Sparsity-Based Parametric Channel Estimation

In this work we design a receiver that iteratively passes soft information between the channel estimation and data decoding stages. The receiver incorporates sparsity-based parametric channel estimation. State-of-the-art sparsity-based iterative receivers simplify the channel estimation problem by restricting the multipath delays to a grid. Our receiver does not impose such a restriction. As a result it does not suffer from the leakage effect, which destroys sparsity. Communication at near capacity rates in high SNR requires a large modulation order. Due to the close proximity of modulation symbols in such systems, the grid-based approximation is of insufficient accuracy. We show numerically that a state-of-the-art iterative receiver with grid-based sparse channel estimation exhibits a bit-error-rate floor in the high SNR regime. On the contrary, our receiver performs very close to the perfect channel state information bound for all SNR values. We also demonstrate both theoretically and numerically that parametric channel estimation works well in dense channels, i.e., when the number of multipath components is large and each individual component cannot be resolved.Comment: Major revision, accepted for IEEE Transactions on Signal Processin

Channel Estimation in Multi-user Massive MIMO Systems by Expectation Propagation based Algorithms

Massive multiple input multiple output (MIMO) technology uses large antenna arrays with tens or hundreds of antennas at the base station (BS) to achieve high spectral efficiency, high diversity, and high capacity. These benefits, however, rely on obtaining accurate channel state information (CSI) at the receiver for both uplink and downlink channels. Traditionally, pilot sequences are transmitted and used at the receiver to estimate the CSI. Since the length of the pilot sequences scale with the number of transmit antennas, for massive MIMO systems downlink channel estimation requires long pilot sequences resulting in reduced spectral efficiency and the so-called pilot contamination due to sharing of the pilots in adjacent cells. In this dissertation we first review the problem of channel estimation in massive MIMO systems. Next, we study the problem of semi-blind channel estimation in the uplink in the case of spatially correlated time-varying channels. The proposed method uses the transmitted data symbols as virtual pilots to enhance channel estimation. An expectation propagation (EP) algorithm is developed to iteratively approximate the joint a posterior distribution of the unknown channel matrix and the transmitted data symbols with a distribution from an exponential family. The distribution is then used for direct estimation of the channel matrix and detection of the data symbols. A modified version of Kalman filtering algorithm referred to as KF-M emerges from our EP derivation and it is used to initialize our algorithm. Simulation results demonstrate that channel estimation error and the symbol error rate of the proposed algorithm improve with the increase in the number of BS antennas or the number of data symbols in the transmitted frame. Moreover, the proposed algorithms can mitigate the effects of pilot contamination as well as time-variations of the channel. Next, we study the problem of downlink channel estimation in multi-user massive MIMO systems. Our approach is based on Bayesian compressive sensing in which the clustered sparse structure of the channel in the angular domain is exploited to reduce the pilot overhead. To capture the clustered structure, we employ a conditionally independent identically distributed Bernoulli-Gaussian prior on the sparse vector representing the channel, and a Markov prior on its support vector. An EP algorithm is developed to approximate the intractable joint distribution on the sparse vector and its support with a distribution from an exponential family. This distribution is then used for direct estimation of the channel. The EP algorithm requires the model parameters which are unknown. We estimate these parameters using the expectation maximization (EM) algorithm. Simulation results show that the proposed combination of EM and EP referred to as EM-EP algorithm outperforms several recently-proposed algorithms in the literature

Channel Estimation in Half and Full Duplex Relays

abstract: Both two-way relays (TWR) and full-duplex (FD) radios are spectrally efficient, and their integration shows great potential to further improve the spectral efficiency, which offers a solution to the fifth generation wireless systems. High quality channel state information (CSI) are the key components for the implementation and the performance of the FD TWR system, making channel estimation in FD TWRs crucial. The impact of channel estimation on spectral efficiency in half-duplex multiple-input-multiple-output (MIMO) TWR systems is investigated. The trade-off between training and data energy is proposed. In the case that two sources are symmetric in power and number of antennas, a closed-form for the optimal ratio of data energy to total energy is derived. It can be shown that the achievable rate is a monotonically increasing function of the data length. The asymmetric case is discussed as well. Efficient and accurate training schemes for FD TWRs are essential for profiting from the inherent spectrally efficient structures of both FD and TWRs. A novel one-block training scheme with a maximum likelihood (ML) estimator is proposed to estimate the channels between the nodes and the residual self-interference (RSI) channel simultaneously. Baseline training schemes are also considered to compare with the one-block scheme. The Cramer-Rao bounds (CRBs) of the training schemes are derived and analyzed by using the asymptotic properties of Toeplitz matrices. The benefit of estimating the RSI channel is shown analytically in terms of Fisher information. To obtain fundamental and analytic results of how the RSI affects the spectral efficiency, one-way FD relay systems are studied. Optimal training design and ML channel estimation are proposed to estimate the RSI channel. The CRBs are derived and analyzed in closed-form so that the optimal training sequence can be found via minimizing the CRB. Extensions of the training scheme to frequency-selective channels and multiple relays are also presented. Simultaneously sensing and transmission in an FD cognitive radio system with MIMO is considered. The trade-off between the transmission rate and the detection accuracy is characterized by the sum-rate of the primary and the secondary users. Different beamforming and combining schemes are proposed and compared.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Low-Complexity Algorithms for Channel Estimation in Optimised Pilot-Assisted Wireless OFDM Systems

Orthogonal frequency division multiplexing (OFDM) has recently become a dominant transmission technology considered for the next generation fixed and mobile broadband wireless communication systems. OFDM has an advantage of lessening the severe effects of the frequency-selective (multipath) fading due to the band splitting into relatively flat fading subchannels, and allows for low-complexity transceiver implementation based on the fast Fourier transform algorithms. Combining OFDM modulation with multilevel frequency-domain symbol mapping (e.g., QAM) and spatial multiplexing (SM) over the multiple-input multiple-output (MIMO) channels, can theoretically achieve near Shannon capacity of the communication link. However, the high-rate and spectrumefficient system implementation requires coherent detection at the receiving end that is possible only when accurate channel state information (CSI) is available. Since in practice, the response of the wireless channel is unknown and is subject to random variation with time, the receiver typically employs a channel estimator for CSI acquisition. The channel response information retrieved by the estimator is then used by the data detector and can also be fed back to the transmitter by means of in-band or out-of-band signalling, so the latter could adapt power loading, modulation and coding parameters according to the channel conditions. Thus, design of an accurate and robust channel estimator is a crucial requirement for reliable communication through the channel, which is selective in time and frequency. In a MIMO configuration, a separate channel estimator has to be associated with each transmit/receive antenna pair, making the estimation algorithm complexity a primary concern. Pilot-assisted methods, relying on the insertion of reference symbols in certain frequencies and time slots, have been found attractive for identification of the doubly-selective radio channels from both the complexity and performance standpoint. In this dissertation, a family of the reduced-complexity estimators for the single and multiple-antenna OFDM systems is developed. The estimators are based on the transform-domain processing and have the same order of computational complexity, irrespective of the number of pilot subcarriers and their positioning. The common estimator structure represents a cascade of successive small-dimension filtering modules. The number of modules, as well as their order inside the cascade, is determined by the class of the estimator (one or two-dimensional) and availability of the channel statistics (correlation and signal-to-noise power ratio). For fine precision estimation in the multipath channels with statistics not known a priori, we propose recursive design of the filtering modules. Simulation results show that in the steady state, performance of the recursive estimators approaches that of their theoretical counterparts, which are optimal in the minimum mean square error (MMSE) sense. In contrast to the majority of the channel estimators developed so far, our modular-type architectures are suitable for the reconfigurable OFDM transceivers where the actual channel conditions influence the decision of what class of filtering algorithm to use, and how to allot pilot subcarrier positions in the band. In the pilot-assisted transmissions, channel estimation and detection are performed separately from each other over the distinct subcarrier sets. The estimator output is used only to construct the detector transform, but not as the detector input. Since performance of both channel estimation and detection depends on the signal-to-noise power vi ratio (SNR) at the corresponding subcarriers, there is a dilemma of the optimal power allocation between the data and the pilot symbols as these are conflicting requirements under the total transmit power constraint. The problem is exacerbated by the variety of channel estimators. Each kind of estimation algorithm is characterised by its own SNR gain, which in general can vary depending on the channel correlation. In this dissertation, we optimise pilot-data power allocation for the case of developed low-complexity one and two-dimensional MMSE channel estimators. The resultant contribution is manifested by the closed-form analytical expressions of the upper bound (suboptimal approximate value) on the optimal pilot-to-data power ratio (PDR) as a function of a number of design parameters (number of subcarriers, number of pilots, number of transmit antennas, effective order of the channel model, maximum Doppler shift, SNR, etc.). The resultant PDR equations can be applied to the MIMO-OFDM systems with arbitrary arrangement of the pilot subcarriers, operating in an arbitrary multipath fading channel. These properties and relatively simple functional representation of the derived analytical PDR expressions are designated to alleviate the challenging task of on-the-fly optimisation of the adaptive SM-MIMO-OFDM system, which is capable of adjusting transmit signal configuration (e.g., block length, number of pilot subcarriers or antennas) according to the established channel conditions

Timing and Frequency Synchronization and Channel Estimation in OFDM-based Systems

Orthogonal frequency division multiplexing (OFDM) due to its appealing features, such as robustness against frequency selective fading and simple channel equalization, is adopted in communications systems such as WLAN, WiMAX and DVB. However, OFDM systems are sensitive to synchronization errors caused by timing and frequency offsets. Besides, the OFDM receiver has to perform channel estimation for coherent detection. The goal of this thesis is to investigate new methods for timing and frequency synchronization and channel estimation in OFDM-based systems. First, we investigate new methods for preamble-aided coarse timing estimation in OFDM systems. Two novel timing metrics using high order statistics-based correlation and differential normalization functions are proposed. The performance of the new timing metrics is evaluated using different criteria including class-separability, robustness to the carrier frequency offset, and computational complexity. It is shown that the new timing metrics can considerably increase the class-separability due to their more distinct values at correct and wrong timing instants, and thus give a significantly better detection performance than the existing timing metrics do. Furthermore, a new method for coarse estimation of the start of the frame is proposed, which remarkably reduces the probability of inter-symbol interference (ISI). The improved performances of the new schemes in multipath fading channels are shown by the probabilities of false alarm, missed-detection and ISI obtained through computer simulations. Second, a novel pilot-aided algorithm is proposed for the detection of integer frequency offset (IFO) in OFDM systems. By transforming the IFO into two new integer parameters, the proposed method can largely reduce the number of trial values for the true IFO. The two new integer parameters are detected using two different pilot sequences, a periodic pilot sequence and an aperiodic pilot sequence. It is shown that the new scheme can significantly reduce the computational complexity while achieving almost the same performance as the previous methods do. Third, we propose a method for joint timing and frequency synchronization and channel estimation for OFDM systems that operate in doubly selective channels. Basis expansion modeling (BEM) that captures the time variations of the channel is used to reduce the number of unknown channel parameters. The BEM coefficients along with the timing and frequency offsets are estimated by using a maximum likelihood (ML) approach. An efficient algorithm is then proposed for reducing the computational complexity of the joint estimation. The complexity of the new method is assessed in terms of the number of multiplications. The mean square estimation error of the proposed method is evaluated in comparison with previous methods, indicating a remarkable performance improvement by the new method. Fourth, we present a new scheme for joint estimation of CFO and doubly selective channel in orthogonal frequency division multiplexing systems. In the proposed preamble-aided method, the time-varying channel is represented using BEM. CFO and BEM coefficients are estimated using the principles of particle and Kalman filtering. The performance of the new method in multipath time-varying channels is investigated in comparison with previous schemes. The simulation results indicate a remarkable performance improvement in terms of the mean square errors of CFO and channel estimates. Fifth, a novel algorithm is proposed for timing and frequency synchronization and channel estimation in the uplink of orthogonal frequency division multiple access (OFDMA) systems by considering high-mobility situations and the generalized subcarrier assignment. By using BEM to represent a doubly selective channel, a maximum likelihood (ML) approach is proposed to jointly estimate the timing and frequency offsets of different users as well as the BEM coefficients of the time-varying channels. A space-alternating generalized expectation-maximization algorithm is then employed to transform the maximization problem for all users into several simpler maximization problems for each user. The computational complexity of the new timing and frequency offset estimator is analyzed and its performance in comparison with that of existing methods using the mean square error is evaluated . Finally, two novel approaches for joint CFO and doubly selective channel estimation in the uplink of multiple-input multiple-output orthogonal frequency division multiple access (MIMO-OFDMA) systems are presented. Considering high-mobility situations, where channels change within an OFDMA symbol interval, and the time varying nature of CFOs, BEM is employed to represent the time variations of the channel. Two new approaches are then proposed based on Schmidt Kalman filtering (SKF). The first approach utilizes Schmidt extended Kalman filtering for each user to estimate the CFO and BEM coefficients. The second approach uses Gaussian particle filter along with SKF to estimate the CFO and BEM coefficients of each user. The Bayesian Cramer Rao bound is derived, and performance of the new schemes are evaluated using mean square error. It is demonstrated that the new schemes can significantly improve the mean square error performance in comparison with that of the existing methods