Synchronization Algorithms for FBMC Systems

Filter bank multicarrier (FBMC) systems, such as FMT and OFDM/OQAM systems, can provide reduced sensitivity to narrowband interference, high flexibility to allocate group of subchannels to different users and a high spectral containment. On the other hand, as all the multicarrier modulation schemes, one of their major drawbacks is their sensitivity to CFO and symbol timing errors. In this thesis the problem of CFO and symbol timing synchronization is examined and new data-aided and blind estimation techniques are proposed. Specifically, it is presented a new joint symbol timing and CFO synchronization algorithm based on the LS approach. Moreover, the joint ML phase offset, CFO and symbol timing estimator for a multiple access OFDM/OQAM system is considered. It is also proposed a closed-form CFO estimator based on the best linear unbiased estimation principle for FMT systems. Blind CFO estimators based on the ML principle for low SNR are also considered and, moreover, a closed-form CFO synchronization algorithm based on the LS method is derived. Finally, it is also proposed, under the assumption of low SNR, the joint ML symbol timing and phase offset estimator

Advanced methods in automatic modulation classification for emerging technologies

Modulation classification (MC) is of large importance in both military and commercial communication applications. It is a challenging problem, especially in non-cooperative wireless environments, where channel fading and no prior knowledge on the incoming signal are major factors that deteriorate the reception performance. Although the average likelihood ratio test method can provide an optimal solution to the MC problem with unknown parameters, it suffers from high computational complexity and in some cases mathematical intractability. Instead, in this research, an array-based quasi-hybrid likelihood ratio test (qHLRT) algorithm is proposed, which depicts two major advantages. First, it is simple yet accurate enough parameter estimation with reduced complexity. Second the incorporation of antenna arrays offers an effective ability to combat fading. Furthermore, a practical array-based qHLRT classifier scheme is implemented, which applies maximal ratio combining (MRC) to increase the accuracy of both carrier frequency offset (CFO) estimation and likelihood function calculation in channel fading. In fact, double CFO estimations are executed in this classifier. With the first the unknown CFO, phase offsets and amplitudes are estimated as prerequisite for MRC operation. Then, MRC is performed using these estimates, followed by a second CFO estimator. Since the input of the second CFO estimator is the output of the MRC, fading effects on the incoming signals are removed significantly and signal-to-noise ratio (SNR) is augmented. As a result, a more accurate CFO estimate is obtained. Consequently, the overall classification performance is improved, especially in low SNR environment. Recently, many state-of-the-arts communication technologies, such as orthogonal frequency division multiplexing (OFDM) modulations, have been emerging. The need for distinguishing OFDM signal from single carrier has become obvious. Besides, some vital parameters of OFDM signals should be extracted for further processing. In comparison to the research on MC for single carrier single antenna transmission, much less attention has been paid to the MC for emerging modulation methods. A comprehensive classification system is proposed for recognizing the OFDM signal and extracting its parameters. An automatic OFDM modulation classifier is proposed, which is based on the goodness-of-fittest. Since OFDM signal is Gaussian, Cramer-von Mises technique, working on the empirical distribution function, has been applied to test the presence of the normality. Numerical results show that such approach can successfully identify OFDM signals from single carrier modulations over a wide SNR range. Moreover, the proposed scheme can provide the acceptable performance when frequency-selective fading is present. Correlation test is then applied to estimate OFDM cyclic prefix duration. A two-phase searching scheme, which is based on Fast Fourier Transform (FFT) as well as Gaussianity test, is devised to detect the number of subcarriers. In the first phase, a coarse search is carried out iteratively. The exact number of subcarriers is determined by the fine tune in the second phase. Both analytical work and numerical results are presented to verify the efficiency of the proposed scheme

Algorithms for channel impairment mitigation in broadband wireless communications

Ph.DDOCTOR OF PHILOSOPH

Transmit diversity and linear and decision-feedback equalizations for frequency-selective fading channels

Abstract-Rapid growth and increasing demands for near-ubiquitous high-quality high-data-rate services present the most challenges for wireless system design. As an effective method to provide such services, space-time (ST) coding is gaining more and more attention. This paper extends ST coding, originally designed for known frequency-nonselective fading channels, to unknown frequency-selective channels. A novel scheme is presented to suppress intersymbol interference, coherently demodulate the information symbols with estimated channel state information in an ST transmit diversity wireless time-division multiple-access system that is equipped with multiple antennas at both transmit and receive sides. The proposed algorithm is powerful and computationally efficient. In addition to the discussion of system identifiability, both theoretical analysis and numerical simulation are presented to illustrate the performance of the proposed estimator and receiver in multipath fading channels

Simultaneous Positioning and Communications: Hybrid Radio Architecture, Estimation Techniques, and Experimental Validation

abstract: Limited spectral access motivates technologies that adapt to diminishing resources and increasingly cluttered environments. A joint positioning-communications system is designed and implemented on \acf{COTS} hardware. This system enables simultaneous positioning of, and communications between, nodes in a distributed network of base-stations and unmanned aerial systems (UASs). This technology offers extreme ranging precision ($<$ 5 cm) with minimal bandwidth (10 MHz), a secure communications link to protect against cyberattacks, a small form factor that enables integration into numerous platforms, and minimal resource consumption which supports high-density networks. The positioning and communications tasks are performed simultaneously with a single, co-use waveform, which efficiently utilizes limited resources and supports higher user densities. The positioning task uses a cooperative, point-to-point synchronization protocol to estimate the relative position and orientation of all users within the network. The communications task distributes positioning information between users and secures the positioning task against cyberattacks. This high-performance system is enabled by advanced time-of-arrival estimation techniques and a modern phase-accurate distributed coherence synchronization algorithm. This technology may be installed in ground-stations, ground vehicles, unmanned aerial systems, and airborne vehicles, enabling a highly-mobile, re-configurable network with numerous applications.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Recent Advances in Wireless Communications and Networks

This book focuses on the current hottest issues from the lowest layers to the upper layers of wireless communication networks and provides "real-time" research progress on these issues. The authors have made every effort to systematically organize the information on these topics to make it easily accessible to readers of any level. This book also maintains the balance between current research results and their theoretical support. In this book, a variety of novel techniques in wireless communications and networks are investigated. The authors attempt to present these topics in detail. Insightful and reader-friendly descriptions are presented to nourish readers of any level, from practicing and knowledgeable communication engineers to beginning or professional researchers. All interested readers can easily find noteworthy materials in much greater detail than in previous publications and in the references cited in these chapters