Pedestrian Counting Based on Piezoelectric Vibration Sensor

Pedestrian counting has attracted much interest of the academic and industry communities for its widespread application in many real-world scenarios. While many recent studies have focused on computer vision-based solutions for the problem, the deployment of cameras brings up concerns about privacy invasion. This paper proposes a novel indoor pedestrian counting approach, based on footstep-induced structural vibration signals with piezoelectric sensors. The approach is privacy-protecting because no audio or video data is acquired. Our approach analyzes the space-differential features from the vibration signals caused by pedestrian footsteps and outputs the number of pedestrians. The proposed approach supports multiple pedestrians walking together with signal mixture. Moreover, it makes no requirement about the number of groups of walking people in the detection area. The experimental results show that the averaged F1-score of our approach is over 0.98, which is better than the vibration signal-based state-of-the-art methods.Peer reviewe

Coffee Queue Project

In this paper, a computer vision system for counting people standing in line is presented. In this application, common techniques such as Adaptive Background Subtraction (ABS), blob tracking with Kalman filter, and occlusion resistive techniques are used to detect and track people. Additionally, a novel method using Dual Adaptive Background Subtractors (DABS) is implemented for dynamically determining the line region in a real-world crowded scene, and also as an alternative target acquisition to regular ABS. The DABS technique acts as a temporal bandpass filter for motion, helping identify people standing in line while in the presence of other moving people. This is achieved by using two ABS with different temporal adaptiveness. Unlike other computer vision papers which perform tests in highly controlled environments, the DABS technique is tested in a crowded Starbucks© at the Cal Poly student union. For any length of people standing in line, result shows that DABS has a lower mean error by one or more people when compared to ABS. Even in challenging crowded scenes where the line can reach 19 people in length, DABS achieves a Normalized RMS Error of 43%

A Microscopic Simulation Laboratory for Evaluation of Off-street Parking Systems

The parking industry produces an enormous amount of data every day that, properly analyzed, will change the way the industry operates. The collected data form patterns that, in most cases, would allow parking operators and property owners to better understand how to maximize revenue and decrease operating expenses and support the decisions such as how to set specific parking policies (e.g. electrical charging only parking space) to achieve the sustainable and eco-friendly parking. However, there lacks an intelligent tool to assess the layout design and operational performance of parking lots to reduce the externalities and increase the revenue. To address this issue, this research presents a comprehensive agent-based framework for microscopic off-street parking system simulation. A rule-based parking simulation logic programming model is formulated. The proposed simulation model can effectively capture the behaviors of drivers and pedestrians as well as spatial and temporal interactions of traffic dynamics in the parking system. A methodology for data collection, processing, and extraction of user behaviors in the parking system is also developed. A Long-Short Term Memory (LSTM) neural network is used to predict the arrival and departure of the vehicles. The proposed simulator is implemented in Java and a Software as a Service (SaaS) graphic user interface is designed to analyze and visualize the simulation results. This study finds the active capacity of the parking system, which is defined as the largest number of actively moving vehicles in the parking system under the facility layout. In the system application of the real world testbed, the numerical tests show (a) the smart check-in device has marginal benefits in vehicle waiting time; (b) the flexible pricing policy may increase the average daily revenue if the elasticity of the price is not involved; (c) the number of electrical charging only spots has a negative impact on the performance of the parking facility; and (d) the rear-in only policy may increase the duration of parking maneuvers and reduce the efficiency during the arrival rush hour. Application of the developed simulation system using a real-world case demonstrates its capability of providing informative quantitative measures to support decisions in designing, maintaining, and operating smart parking facilities

적분 및 매개변수 기법 융합을 이용한 스마트폰 다중 동작에서 보행 항법

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 기계항공공학부, 2020. 8. 박찬국.In this dissertation, an IA-PA fusion-based PDR (Pedestrian Dead Reckoning) using low-cost inertial sensors is proposed to improve the indoor position estimation. Specifically, an IA (Integration Approach)-based PDR algorithm combined with measurements from PA (Parametric Approach) is constructed so that the algorithm is operated even in various poses that occur when a pedestrian moves with a smartphone indoors. In addition, I propose an algorithm that estimates the device attitude robustly in a disturbing situation by an ellipsoidal method. In addition, by using the machine learning-based pose recognition, it is possible to improve the position estimation performance by varying the measurement update according to the poses. First, I propose an adaptive attitude estimation based on ellipsoid technique to accurately estimate the direction of movement of a smartphone device. The AHRS (Attitude and Heading Reference System) uses an accelerometer and a magnetometer as measurements to calculate the attitude based on the gyro and to compensate for drift caused by gyro sensor errors. In general, the attitude estimation performance is poor in acceleration and geomagnetic disturbance situations, but in order to effectively improve the estimation performance, this dissertation proposes an ellipsoid-based adaptive attitude estimation technique. When a measurement disturbance comes in, it is possible to update the measurement more accurately than the adaptive estimation technique without considering the direction by adjusting the measurement covariance with the ellipsoid method considering the direction of the disturbance. In particular, when the disturbance only comes in one axis, the proposed algorithm can use the measurement partly by updating the other two axes considering the direction. The proposed algorithm shows its effectiveness in attitude estimation under disturbances through the rate table and motion capture equipment. Next, I propose a PDR algorithm that integrates IA and PA that can be operated in various poses. When moving indoors using a smartphone, there are many degrees of freedom, so various poses such as making a phone call, texting, and putting a pants pocket are possible. In the existing smartphone-based positioning algorithms, the position is estimated based on the PA, which can be used only when the pedestrian's walking direction and the device's direction coincide, and if it does not, the position error due to the mismatch in angle is large. In order to solve this problem, this dissertation proposes an algorithm that constructs state variables based on the IA and uses the position vector from the PA as a measurement. If the walking direction and the device heading do not match based on the pose recognized through machine learning technique, the position is updated in consideration of the direction calculated using PCA (Principal Component Analysis) and the step length obtained through the PA. It can be operated robustly even in various poses that occur. Through experiments considering various operating conditions and paths, it is confirmed that the proposed method stably estimates the position and improves performance even in various indoor environments.본 논문에서는 저가형 관성센서를 이용한 보행항법시스템 (PDR: Pedestrian Dead Reckoning)의 성능 향상 알고리즘을 제안한다. 구체적으로 보행자가 실내에서 스마트폰을 들고 이동할 때 발생하는 다양한 동작 상황에서도 운용될 수 있도록, 매개변수 기반 측정치를 사용하는 적분 기반의 보행자 항법 알고리즘을 구성한다. 또한 타원체 기반 자세 추정 알고리즘을 구성하여 외란 상황에서도 강인하게 자세를 추정하는 알고리즘을 제안한다. 추가적으로 기계학습 기반의 동작 인식 정보를 이용, 동작에 따른 측정치 업데이트를 달리함으로써 위치 추정 성능을 향상시킨다. 먼저 스마트폰 기기의 이동 방향을 정확하게 추정하기 위해 타원체 기법 기반 적응 자세 추정을 제안한다. 자세 추정 기법 (AHRS: Attitude and Heading Reference System)은 자이로를 기반으로 자세를 계산하고 자이로 센서오차에 의해 발생하는 드리프트를 보정하기 위해 측정치로 가속도계와 지자계를 사용한다. 일반적으로 가속 및 지자계 외란 상황에서는 자세 추정 성능이 떨어지는데, 추정 성능을 효과적으로 향상시키기 위해 본 논문에서는 타원체 기반 적응 자세 추정 기법을 제안한다. 측정치 외란이 들어오는 경우, 외란의 방향을 고려하여 타원체 기법으로 측정치 공분산을 조정해줌으로써 방향을 고려하지 않은 적응 추정 기법보다 정확하게 측정치 업데이트를 할 수 있다. 특히 외란이 한 축으로만 들어오는 경우, 제안한 알고리즘은 방향을 고려해 나머지 두 축에 대해서는 업데이트 해줌으로써 측정치를 부분적으로 사용할 수 있다. 레이트 테이블, 모션 캡쳐 장비를 통해 제안한 알고리즘의 자세 성능이 향상됨을 확인하였다. 다음으로 다양한 동작에서도 운용 가능한 적분 및 매개변수 기법을 융합하는 보행항법 알고리즘을 제안한다. 스마트폰을 이용해 실내를 이동할 때에는 자유도가 크기 때문에 전화 걸기, 문자, 바지 주머니 넣기 등 다양한 동작이 발생 가능하다. 기존의 스마트폰 기반 보행 항법에서는 매개변수 기법을 기반으로 위치를 추정하는데, 이는 보행자의 진행 방향과 기기의 방향이 일치하는 경우에만 사용 가능하며 일치하지 않는 경우 자세 오차로 인한 위치 오차가 크게 발생한다. 이러한 문제를 해결하기 위해 본 논문에서는 적분 기반 기법을 기반으로 상태변수를 구성하고 매개변수 기법을 통해 나오는 위치 벡터를 측정치로 사용하는 알고리즘을 제안한다. 만약 기계학습을 통해 인식한 동작을 바탕으로 진행 방향과 기기 방향이 일치하지 않는 경우, 주성분 분석을 통해 계산한 진행방향을 이용해 진행 방향을, 매개변수 기법을 통해 얻은 보폭으로 거리를 업데이트해 줌으로써 보행 중 발생하는 여러 동작에서도 강인하게 운용할 수 있다. 다양한 동작 상황 및 경로를 고려한 실험을 통해 위에서 제안한 방법이 다양한 실내 환경에서도 안정적으로 위치를 추정하고 성능이 향상됨을 확인하였다.Chapter 1 Introduction 1 1.1 Motivation and Background 1 1.2 Objectives and Contribution 5 1.3 Organization of the Dissertation 6 Chapter 2 Pedestrian Dead Reckoning System 8 2.1 Overview of Pedestrian Dead Reckoning 8 2.2 Parametric Approach 9 2.2.1 Step detection algorithm 11 2.2.2 Step length estimation algorithm 13 2.2.3 Heading estimation 14 2.3 Integration Approach 15 2.3.1 Extended Kalman filter 16 2.3.2 INS-EKF-ZUPT 19 2.4 Activity Recognition using Machine Learning 21 2.4.1 Challenges in HAR 21 2.4.2 Activity recognition chain 22 Chapter 3 Attitude Estimation in Smartphone 26 3.1 Adaptive Attitude Estimation in Smartphone 26 3.1.1 Indirect Kalman filter-based attitude estimation 26 3.1.2 Conventional attitude estimation algorithms 29 3.1.3 Adaptive attitude estimation using ellipsoidal methods 30 3.2 Experimental Results 36 3.2.1 Simulation 36 3.2.2 Rate table experiment 44 3.2.3 Handheld rotation experiment 46 3.2.4 Magnetic disturbance experiment 49 3.3 Summary 53 Chapter 4 Pedestrian Dead Reckoning in Multiple Poses of a Smartphone 54 4.1 System Overview 55 4.2 Machine Learning-based Pose Classification 56 4.2.1 Training dataset 57 4.2.2 Feature extraction and selection 58 4.2.3 Pose classification result using supervised learning in PDR 62 4.3 Fusion of the Integration and Parametric Approaches in PDR 65 4.3.1 System model 67 4.3.2 Measurement model 67 4.3.3 Mode selection 74 4.3.4 Observability analysis 76 4.4 Experimental Results 82 4.4.1 AHRS results 82 4.4.2 PCA results 84 4.4.3 IA-PA results 88 4.5 Summary 100 Chapter 5 Conclusions 103 5.1 Summary of the Contributions 103 5.2 Future Works 105 국문초록 125 Acknowledgements 127Docto

ZiZoNet: A Zoom-In and Zoom-Out Mechanism for Crowd Counting in Static Images

As people gather during different social, political or musical events, automated crowd analysis can lead to effective and better management of such events to prevent any unwanted scene as well as avoid political manipulation of crowd numbers. Crowd counting remains an integral part of crowd analysis and also an active research area in the field of computer vision. Existing methods fail to perform where crowd density is either too high or too low in an image, thus resulting in either overestimation or underestimation. These methods also mix crowd-like cluttered background regions (e.g. tree leaves or small and continuous patterns) in images with actual crowd, resulting in further crowd overestimation. In this work, we present a novel deep convolutional neural network (CNN) based framework ZiZoNet for automated crowd counting in static images in very low to very high crowd density scenarios to address above issues. ZiZoNet consists of three modules namely Crowd Density Classifier (CDC), Decision Module (DM) and Count Regressor Module (CRM). The test image, divided into 224x224 patches, passes through the CDC module that classifies each patch to a class label (no-crowd, low-crowd, medium-crowd, high-crowd). Based on the CDC information and using either heuristic Rule-set Engine (RSE) or machine learning based Random Forest based Decision Block (RFDB), DM decides which mode (zoom-in, normal or zoom-out) this image should use for crowd counting. CRM then performs patch-wise crowd estimate for this image accordingly as decided or instructed by the DM module. Extensive experiments on three diverse and challenging crowd counting benchmarks (UCF-QNRF, ShanghaiTech, AHU-Crowd) show that our method outperforms current state-of-the-art models under most of the evaluation criteria