Novel high performance techniques for high definition computer aided tomography

Mención Internacional en el título de doctorMedical image processing is an interdisciplinary field in which multiple research areas are involved: image acquisition, scanner design, image reconstruction algorithms, visualization, etc. X-Ray Computed Tomography (CT) is a medical imaging modality based on the attenuation suffered by the X-rays as they pass through the body. Intrinsic differences in attenuation properties of bone, air, and soft tissue result in high-contrast images of anatomical structures. The main objective of CT is to obtain tomographic images from radiographs acquired using X-Ray scanners. The process of building a 3D image or volume from the 2D radiographs is known as reconstruction. One of the latest trends in CT is the reduction of the radiation dose delivered to patients through the decrease of the amount of acquired data. This reduction results in artefacts in the final images if conventional reconstruction methods are used, making it advisable to employ iterative reconstruction algorithms. There are numerous reconstruction algorithms available, from which we can highlight two specific types: traditional algorithms, which are fast but do not enable the obtaining of high quality images in situations of limited data; and iterative algorithms, slower but more reliable when traditional methods do not reach the quality standard requirements. One of the priorities of reconstruction is the obtaining of the final images in near real time, in order to reduce the time spent in diagnosis. To accomplish this objective, new high performance techniques and methods for accelerating these types of algorithms are needed. This thesis addresses the challenges of both traditional and iterative reconstruction algorithms, regarding acceleration and image quality. One common approach for accelerating these algorithms is the usage of shared-memory and heterogeneous architectures. In this thesis, we propose a novel simulation/reconstruction framework, namely FUX-Sim. This framework follows the hypothesis that the development of new flexible X-ray systems can benefit from computer simulations, which may also enable performance to be checked before expensive real systems are implemented. Its modular design abstracts the complexities of programming for accelerated devices to facilitate the development and evaluation of the different configurations and geometries available. In order to obtain near real execution times, low-level optimizations for the main components of the framework are provided for Graphics Processing Unit (GPU) architectures. Other alternative tackled in this thesis is the acceleration of iterative reconstruction algorithms by using distributed memory architectures. We present a novel architecture that unifies the two most important computing paradigms for scientific computing nowadays: High Performance Computing (HPC). The proposed architecture combines Big Data frameworks with the advantages of accelerated computing. The proposed methods presented in this thesis provide more flexible scanner configurations as they offer an accelerated solution. Regarding performance, our approach is as competitive as the solutions found in the literature. Additionally, we demonstrate that our solution scales with the size of the problem, enabling the reconstruction of high resolution images.El procesamiento de imágenes médicas es un campo interdisciplinario en el que participan múltiples áreas de investigación como la adquisición de imágenes, diseño de escáneres, algoritmos de reconstrucción de imágenes, visualización, etc. La tomografía computarizada (TC) de rayos X es una modalidad de imágen médica basada en el cálculo de la atenuación sufrida por los rayos X a medida que pasan por el cuerpo a escanear. Las diferencias intrínsecas en la atenuación de hueso, aire y tejido blando dan como resultado imágenes de alto contraste de estas estructuras anatómicas. El objetivo principal de la TC es obtener imágenes tomográficas a partir estas radiografías obtenidas mediante escáneres de rayos X. El proceso de construir una imagen o volumen en 3D a partir de las radiografías 2D se conoce como reconstrucción. Una de las últimas tendencias en la tomografía computarizada es la reducción de la dosis de radiación administrada a los pacientes a través de la reducción de la cantidad de datos adquiridos. Esta reducción da como resultado artefactos en las imágenes finales si se utilizan métodos de reconstrucción convencionales, por lo que es aconsejable emplear algoritmos de reconstrucción iterativos. Existen numerosos algoritmos de reconstrucción disponibles a partir de los cuales podemos destacar dos categorías: algoritmos tradicionales, rápidos pero no permiten obtener imágenes de alta calidad en situaciones en las que los datos son limitados; y algoritmos iterativos, más lentos pero más estables en situaciones donde los métodos tradicionales no alcanzan los requisitos en cuanto a la calidad de la imagen. Una de las prioridades de la reconstrucción es la obtención de las imágenes finales en tiempo casi real, con el fin de reducir el tiempo de diagnóstico. Para lograr este objetivo, se necesitan nuevas técnicas y métodos de alto rendimiento para acelerar estos algoritmos. Esta tesis aborda los desafíos de los algoritmos de reconstrucción tradicionales e iterativos, con respecto a la aceleración y la calidad de imagen. Un enfoque común para acelerar estos algoritmos es el uso de arquitecturas de memoria compartida y heterogéneas. En esta tesis, proponemos un nuevo sistema de simulación/reconstrucción, llamado FUX-Sim. Este sistema se construye alrededor de la hipótesis de que el desarrollo de nuevos sistemas de rayos X flexibles puede beneficiarse de las simulaciones por computador, en los que también se puede realizar un control del rendimiento de los nuevos sistemas a desarrollar antes de su implementación física. Su diseño modular abstrae las complejidades de la programación para aceleradores con el objetivo de facilitar el desarrollo y la evaluación de las diferentes configuraciones y geometrías disponibles. Para obtener ejecuciones en casi tiempo real, se proporcionan optimizaciones de bajo nivel para los componentes principales del sistema en las arquitecturas GPU. Otra alternativa abordada en esta tesis es la aceleración de los algoritmos de reconstrucción iterativa mediante el uso de arquitecturas de memoria distribuidas. Presentamos una arquitectura novedosa que unifica los dos paradigmas informáticos más importantes en la actualidad: computación de alto rendimiento (HPC) y Big Data. La arquitectura propuesta combina sistemas Big Data con las ventajas de los dispositivos aceleradores. Los métodos propuestos presentados en esta tesis proporcionan configuraciones de escáner más flexibles y ofrecen una solución acelerada. En cuanto al rendimiento, nuestro enfoque es tan competitivo como las soluciones encontradas en la literatura. Además, demostramos que nuestra solución escala con el tamaño del problema, lo que permite la reconstrucción de imágenes de alta resolución.This work has been mainly funded thanks to a FPU fellowship (FPU14/03875) from the Spanish Ministry of Education. It has also been partially supported by other grants: • DPI2016-79075-R. “Nuevos escenarios de tomografía por rayos X”, from the Spanish Ministry of Economy and Competitiveness. • TIN2016-79637-P Towards unification of HPC and Big Data Paradigms from the Spanish Ministry of Economy and Competitiveness. • Short-term scientific missions (STSM) grant from NESUS COST Action IC1305. • TIN2013-41350-P, Scalable Data Management Techniques for High-End Computing Systems from the Spanish Ministry of Economy and Competitiveness. • RTC-2014-3028-1 NECRA Nuevos escenarios clinicos con radiología avanzada from the Spanish Ministry of Economy and Competitiveness.Programa Oficial de Doctorado en Ciencia y Tecnología InformáticaPresidente: José Daniel García Sánchez.- Secretario: Katzlin Olcoz Herrero.- Vocal: Domenico Tali

Latest developments in the improvement and quantification of high resolution X-ray tomography data

X-ray Computed Tomography (CT) is a powerful tool to visualize the internal structure of objects. Although X-ray CT is often used for medical purposes, it has many applications in the academic and industrial world. X-ray CT is a non destructive tool which provides the possibility to obtain a three dimensional (3D) representation of the investigated object. The currently available high resolution systems can achieve resolutions of less than one micrometer which makes it a valuable technique for various scientific and industrial applications. At the Centre for X-ray Tomography of the Ghent University (UGCT) research is performed on the improvement and application of high resolution X-ray CT (µCT). Important aspects of this research are the development of state of the art high resolution CT scanners and the development of software for controlling the scanners, reconstruction software and analysis software. UGCT works closely together with researchers from various research fields and each of them have their specific requirements. To obtain the best possible results in any particular case, the scanners are developed in a modular way, which allows for optimizations, modifications and improvements during use. Another way of improving the image quality lies in optimization of the reconstruction software, which is why the software package Octopus was developed in house. Once a scanned volume is reconstructed, an important challenge lies in the interpretation of the obtained data. For this interpretation visualization alone is often insufficient and quantitative information is needed. As researchers from different fields have different needs with respect to quantification of their data, UGCT developed the 3D software analysis package Morpho+ for analysing all kinds of samples. The research presented in this work focuses on improving the accuracy and extending the amount of the quantitative information which can be extracted from µCT data. Even if a perfect analysis algorithm would exist, it would be impossible to accurately quantify data of which the image quality is insufficient. As image quality can significantly be improved with the aid of adequate reconstruction techniques, the research presented in this work focuses on analysis as well as reconstruction software. As the datasets obtained with µCT at UGCT are of substantial size, the possibility to process large datasets in a limited amount of time is crucial in the development of new algorithms. The contributions of the author can be subdivided in three major aspects of the processing of CT data: The modification of iterative reconstruction algorithms, the extension and optimization of 3D analysis algorithms and the development of a new algorithm for discrete tomography. These topics are discussed in more detail below. A main aspect in the improvement of image quality is the reduction of artefacts which often occur in µCT such as noise-, cone beam- and beam hardening artefacts. Cone beam artefacts are a result of the cone beam geometry which is often used in laboratory based µCT and beam hardening is a consequence of the polychromaticity of the beam. Although analytical reconstruction algorithms based on filtered back projection are still most commonly used for the reconstruction of µCT datasets, there is another approach which is becoming a valuable alternative: iterative reconstruction algorithms. Iterative algorithms are inherently better at coping with the previously mentioned artefacts. Additionally iterative algorithms can improve image quality in case the number of available projections or the angular range is limited. In chapter 3 the possibility to modify these algorithms to further improve image quality is investigated. It is illustrated that streak artefacts which can occur when metals are present in a sample can be significantly reduced by modifying the reconstruction algorithm. Additionally, it is demonstrated that the incorporation of an initial solution (if available) allows reducing the required number of projections for a second slightly modified sample. To reduce beam hardening artefacts, the physics of the process is modelled and incorporated in the iterative reconstruction algorithm, which results in an easy to use and efficient algorithm for the reduction of beam hardening artefacts and requires no prior knowledge about the sample. In chapter 4 the 3D analysis process is described. In the scope of this work, algorithms of the 3D-analysis software package Morpho+ were optimized and new methods were added to the program, focusing on quantifying connectivity and shape of the phases and elements in the sample, as well as obtaining accurate segmentation, which is essential step in the analysis process is the segmentation of the reconstructed sample. Evidently, the different phases in the sample need to be separated from one another. However, often a second segmentation step is needed in order to separate the different elements present in a volume, such as pores in a pore network, or to separate elements which are physically separated but appear to be connected on the reconstructed images to limited resolution and/or limited contrast of the scan. The latter effect often occurs in the process of identifying different grains in a geological sample. Algorithms which are available for this second segmentation step often result in over-segmentation, i.e. elements are not only separated from one another but also separations inside a single element occur. To overcome this effect an algorithm is presented to semi-automically rejoin the separated parts of a single element. Additionally, Morpho+ was extended with tools to extract information about the connectivity of a sample, which is difficult to quantify but important for samples from various research fields. The connectivity can be described with the aid of the calculation of the Euler Number and tortuosity. Moreover, the number of neighbouring objects of each object can be determined and the connections between objects can be quantified. It is now also possible to extract a skeleton, which describes the basic structure of the volume. A calculation of several shape parameters was added to the program as well, resulting in the possibility to visualize the different objects on a disc-rod diagram. The many possibilities to characterize reconstructed samples with the aid of Morpho+ are illustrated on several applications. As mentioned in the previous section, an important aspect for correctly quantifying µCT data is the correct segmentation of the different phases present in the sample. Often it is the case that a sample consists of only one or a limited number of materials (and surrounding air). In this case this prior knowledge about the sample can be incorporated in the reconstruction algorithm. These kind of algorithms are referred to as discrete reconstruction algorithms, which are used when only a limited number of projections is available. Chapter 5 deals with discrete reconstruction algorithms. One of these algorithms is the Discrete Algebraic Reconstruction Technique, which combines iterative with discrete reconstruction and has shown excellent results. DART requires knowledge about the attenuation coefficient(s) and segmentation threshold(s) of the material(s). For µCT applications (resulting in large datasets) reconstruction times can significantly increase when DART is used in comparison with standard iterative reconstruction, as DART requires more iterations. This complicates the practical applicability of DART for routine applications at UGCT. Therefore a modified algorithm (based on the DART algorithm) for reconstruction of samples consisting out of only one material and surrounding air was developed in the scope of this work, which is referred to as the Experimental Discrete Algebraic Reconstruction Technique (EDART). The goal of this algorithm is to obtain better reconstruction results in comparison with standard iterative reconstruction algorithms, without significantly increasing reconstruction time. Moreover, a fast and intuitive technique to estimate the attenuation coefficient and threshold was developed as a part of the EDART algorithm. In chapter 5 it is illustrated that EDART provides improved image quality for both phantom and real data, in comparison with standard iterative reconstruction algorithms, when only a limited number of projections is available. The algorithms presented in this work can be subsequently applied but can also be combined with one another. It is for example illustrated in chapter 5 that the beam hardening correction method can also be incorporated in the EDART algorithm. The combination of the introduced methods allows for an improvement in the process of extracting accurate quantitative information from µCT data

Global and Local Structural Health Monitoring Methods Based on Wireless Telemetry and Boundary-based Thermography

Our nation’s economy is dependent upon its transportation system for the movement of people, goods and services. Infrastructure plays a vital role in supporting transportation services. Given their importance, structures must be maintained to offer safe and reliable operations over extended life-cycles. Structural health monitoring (SHM) has emerged to offer owners a quantitative approach to monitoring structures, assessing system performance and estimating structural conditions. While SHM systems have been successfully deployed to structures, their full potential has not been reaped due to the gap that exists between SHM data and the decision-making needs of owners. This thesis contributes to the field by bridging this gap through two approaches. First, the thesis explores the advancement of wireless monitoring systems whose instrumentation strategy is defined by the needs of the decision-making process of the owner. This is illustrated in the thesis by exploring wireless monitoring systems and associated data-to-decision (D2D) frameworks in the United States Coast Guard (USCG) high-speed aluminum Response Boat-Medium (RB-M) and in the Harahan Bridge. In the former, the wireless hull monitoring system is tailored to derive RB-M hull response data over a short-period to create relationships between the environmental and operational conditions (EOC) of the vessel and the accumulation of fatigue in a critical hull component. In doing so, the vessel owner can make life-cycle decisions centered on managing fatigue accumulation by considering the future operational profile of the vessel. In the latter application, a wireless monitoring system is installed on the Harahan Bridge (which is a steel truss railroad bridge) to monitor bridge responses to triggered load events including trains, collisions, and earthquakes. Again, a fatigue critical eyebar element is considered with an alerting framework created to alert the bridge owner of overloading conditions that can accelerate fatigue accumulation. While the two case studies showcase clear benefits to designing wireless monitoring systems around the decision-making of the asset owner, they also highlight the value of local structural measurements for component health assessment. To extend the benefits offered by local sensing further, the thesis explores the creation of a cost-effective approach to damage detection through thermal conduction. Using point heaters and temperature sensors, a thermal-based computed tomography (CT) image reconstruction method is developed for two-dimensional (2D) mapping of structural conditions. This powerful local damage imaging method is implemented using a wireless impedance analyzer developed for use in structural wireless monitoring systems. In summary, a new approach to designing SHM systems is developed that looks first at the desired outcome, or decision that the data should inform. This is showcased in two unique wireless monitoring system and D2D framework studies. Next, a novel thermal imaging technique is proposed and validated. Lastly, a first-of-its-kind multi-functional wireless impedance analyzer is developed that is capable of enabling the wireless and permanent installation of multiple spatial sensing techniques.PHDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/138654/1/nephi_1.pd

Characterization of multiphase flows integrating X-ray imaging and virtual reality

Multiphase flows are used in a wide variety of industries, from energy production to pharmaceutical manufacturing. However, because of the complexity of the flows and difficulty measuring them, it is challenging to characterize the phenomena inside a multiphase flow. To help overcome this challenge, researchers have used numerous types of noninvasive measurement techniques to record the phenomena that occur inside the flow. One technique that has shown much success is X-ray imaging. While capable of high spatial resolutions, X-ray imaging generally has poor temporal resolution. This research improves the characterization of multiphase flows in three ways. First, an X-ray image intensifier is modified to use a high-speed camera to push the temporal limits of what is possible with current tube source X-ray imaging technology. Using this system, sample flows were imaged at 1000 frames per second without a reduction in spatial resolution. Next, the sensitivity of X-ray computed tomography (CT) measurements to changes in acquisition parameters is analyzed. While in theory CT measurements should be stable over a range of acquisition parameters, previous research has indicated otherwise. The analysis of this sensitivity shows that, while raw CT values are strongly affected by changes to acquisition parameters, if proper calibration techniques are used, acquisition parameters do not significantly influence the results for multiphase flow imaging. Finally, two algorithms are analyzed for their suitability to reconstruct an approximate tomographic slice from only two X-ray projections. These algorithms increase the spatial error in the measurement, as compared to traditional CT; however, they allow for very high temporal resolutions for 3D imaging. The only limit on the speed of this measurement technique is the image intensifier-camera setup, which was shown to be capable of imaging at a rate of at least 1000 FPS. While advances in measurement techniques for multiphase flows are one part of improving multiphase flow characterization, the challenge extends beyond measurement techniques. For improved measurement techniques to be useful, the data must be accessible to scientists in a way that maximizes the comprehension of the phenomena. To this end, this work also presents a system for using the Microsoft Kinect sensor to provide natural, non-contact interaction with multiphase flow data. Furthermore, this system is constructed so that it is trivial to add natural, non-contact interaction to immersive visualization applications. Therefore, multiple visualization applications can be built that are optimized to specific types of data, but all leverage the same natural interaction. Finally, the research is concluded by proposing a system that integrates the improved X-ray measurements, with the Kinect interaction system, and a CAVE automatic virtual environment (CAVE) to present scientists with the multiphase flow measurements in an intuitive and inherently three-dimensional manner

Flame front propagation velocity measurement and in-cylinder combustion reconstruction using POET

The objective of this thesis is to develop an intelligent diagnostic technique POET (Passive Optical Emission Tomography) for the investigation of in cylinder combustion chemiluminescence. As a non-intrusive optical system, the POET system employs 40 fibre optic cables connected to 40 PMTs (Photo Multiplier Tube) to monitor the combustion process and flame front propagation in a modified commercial OHV (Over Head Valve) Pro 206 IC engine. The POET approach overcomes several limitations of present combustion research methods using a combination of fibre optic detection probes, photomultipliers and a tomographic diagnostics. The fibre optic probes are placed on a specially designed cylinder head gasket for non-invasively inserting cylinder. Each independent probe can measure the turbulent chemiluminescence of combustion flame front at up to 20 kHz. The resultant intensities can then be gathered tomographically using MART (Multiplicative Algebraic Reconstruction Technique) software to reconstruct an image of the complete flame-front. The approach is essentially a lensless imaging technique, which has the advantage of not requiring a specialized engine construction with conventional viewing ports to visualize the combustion image. The fibre optic system, through the use of 40, 2m long thermally isolated fibre optic cables can withstand combustion temperatures and is immune from electronic noise, typically generated by the spark plug. The POET system uses a MART tomographic methodology to reconstruct the turbulent combustion process. The data collected has been reconstructed to produce a temporal and spatial image of the combustion flame front. The variations of lame turbulence are monitored by sequences of reconstructed images. Therefore, the POET diagnostic technique reduces the complications of classic flame front propagation measurement systems and successfully demonstrates the in-cylinder combustion process. In this thesis, a series of calibration exercises have been performed to ensure that the photomultipliers of the POET system have sufficient temporal and spatial resolution to quantitatively map the flow velocity turbulence and chemiluminescence of the flame front. In the results, the flame has been analyzed using UV filters and blue filters to monitor the modified natural gas fuel engine. The flame front propagation speed has been evaluated and it is, on average, 12 m/s at 2280 rpm. Sequences of images have been used to illustrate the combustion explosion process at different rpm

Simulation of Clinical PET Studies for the Assessment of Quantification Methods

On this PhD thesis we developed a methodology for evaluating the robustness of SUV measurements based on MC simulations and the generation of novel databases of simulated studies based on digital anthropomorphic phantoms. This methodology has been applied to different problems related to quantification that were not previously addressed. Two methods for estimating the extravasated dose were proposed andvalidated in different scenarios using MC simulations. We studied the impact of noise and low counting in the accuracy and repeatability of three commonly used SUV metrics (SUVmax, SUVmean and SUV50). The same model was used to study the effect of physiological muscular uptake variations on the quantification of FDG-PET studies. Finally, our MC models were applied to simulate 18F-fluorocholine (FCH) studies. The aim was to study the effect of spill-in counts from neighbouring regions on the quantification of small regions close to high activity extended sources

Fast algorithm for real-time rings reconstruction

The GAP project is dedicated to study the application of GPU in several contexts in which real-time response is important to take decisions. The definition of real-time depends on the application under study, ranging from answer time of μs up to several hours in case of very computing intensive task. During this conference we presented our work in low level triggers [1] [2] and high level triggers [3] in high energy physics experiments, and specific application for nuclear magnetic resonance (NMR) [4] [5] and cone-beam CT [6]. Apart from the study of dedicated solution to decrease the latency due to data transport and preparation, the computing algorithms play an essential role in any GPU application. In this contribution, we show an original algorithm developed for triggers application, to accelerate the ring reconstruction in RICH detector when it is not possible to have seeds for reconstruction from external trackers