Accelerating SPICE Model-Evaluation using FPGAs

Single-FPGA spatial implementations can provide an order of magnitude speedup over sequential microprocessor implementations for data-parallel, floating-point computation in SPICE model-evaluation. Model-evaluation is a key component of the SPICE circuit simulator and it is characterized by large irregular floating-point compute graphs. We show how to exploit the parallelism available in these graphs on single-FPGA designs with a low-overhead VLIW-scheduled architecture. Our architecture uses spatial floating-point operators coupled to local high-bandwidth memories and interconnected by a time-shared network. We retime operation inputs in the model-evaluation to allow independent scheduling of computation and communication. With this approach, we demonstrate speedups of 2–18× over a dual-core 3GHz Intel Xeon 5160 when using a Xilinx Virtex 5 LX330T for a variety of SPICE device models

Compiler and Architecture Design for Coarse-Grained Programmable Accelerators

abstract: The holy grail of computer hardware across all market segments has been to sustain performance improvement at the same pace as silicon technology scales. As the technology scales and the size of transistors shrinks, the power consumption and energy usage per transistor decrease. On the other hand, the transistor density increases significantly by technology scaling. Due to technology factors, the reduction in power consumption per transistor is not sufficient to offset the increase in power consumption per unit area. Therefore, to improve performance, increasing energy-efficiency must be addressed at all design levels from circuit level to application and algorithm levels. At architectural level, one promising approach is to populate the system with hardware accelerators each optimized for a specific task. One drawback of hardware accelerators is that they are not programmable. Therefore, their utilization can be low as they perform one specific function. Using software programmable accelerators is an alternative approach to achieve high energy-efficiency and programmability. Due to intrinsic characteristics of software accelerators, they can exploit both instruction level parallelism and data level parallelism. Coarse-Grained Reconfigurable Architecture (CGRA) is a software programmable accelerator consists of a number of word-level functional units. Motivated by promising characteristics of software programmable accelerators, the potentials of CGRAs in future computing platforms is studied and an end-to-end CGRA research framework is developed. This framework consists of three different aspects: CGRA architectural design, integration in a computing system, and CGRA compiler. First, the design and implementation of a CGRA and its instruction set is presented. This design is then modeled in a cycle accurate system simulator. The simulation platform enables us to investigate several problems associated with a CGRA when it is deployed as an accelerator in a computing system. Next, the problem of mapping a compute intensive region of a program to CGRAs is formulated. From this formulation, several efficient algorithms are developed which effectively utilize CGRA scarce resources very well to minimize the running time of input applications. Finally, these mapping algorithms are integrated in a compiler framework to construct a compiler for CGRADissertation/ThesisDoctoral Dissertation Computer Science 201

Performance evaluation of MPEG-4 Video encoder on Adres

Curs 2006-2007Actualment un típic embedded system (ex. telèfon mòbil) requereix alta qualitat per portar a terme tasques com codificar/descodificar a temps real; han de consumir poc energia per funcionar hores o dies utilitzant bateries lleugeres; han de ser el suficientment flexibles per integrar múltiples aplicacions i estàndards en un sol aparell; han de ser dissenyats i verificats en un període de temps curt tot i l’augment de la complexitat. Els dissenyadors lluiten contra aquestes adversitats, que demanen noves innovacions en arquitectures i metodologies de disseny. Coarse-grained reconfigurable architectures (CGRAs) estan emergent com a candidats potencials per superar totes aquestes dificultats. Diferents tipus d’arquitectures han estat presentades en els últims anys. L’alta granularitat redueix molt el retard, l’àrea, el consum i el temps de configuració comparant amb les FPGAs. D’altra banda, en comparació amb els tradicionals processadors coarse-grained programables, els alts recursos computacionals els permet d’assolir un alt nivell de paral•lelisme i eficiència. No obstant, els CGRAs existents no estant sent aplicats principalment per les grans dificultats en la programació per arquitectures complexes. ADRES és una nova CGRA dissenyada per I’Interuniversity Micro-Electronics Center (IMEC). Combina un processador very-long instruction word (VLIW) i un coarse-grained array per tenir dues opcions diferents en un mateix dispositiu físic. Entre els seus avantatges destaquen l’alta qualitat, poca redundància en les comunicacions i la facilitat de programació. Finalment ADRES és un patró enlloc d’una arquitectura concreta. Amb l’ajuda del compilador DRESC (Dynamically Reconfigurable Embedded System Compile), és possible trobar millors arquitectures o arquitectures específiques segons l’aplicació. Aquest treball presenta la implementació d’un codificador MPEG-4 per l’ADRES. Mostra l’evolució del codi per obtenir una bona implementació per una arquitectura donada. També es presenten les característiques principals d’ADRES i el seu compilador (DRESC). Els objectius són de reduir al màxim el nombre de cicles (temps) per implementar el codificador de MPEG-4 i veure les diferents dificultats de treballar en l’entorn ADRES. Els resultats mostren que els cícles es redueixen en un 67% comparant el codi inicial i final en el mode VLIW i un 84% comparant el codi inicial en VLIW i el final en mode CGA.Nowadays, a typical embedded system requires high performance to perform tasks such as video encoding/decoding at run-time. It should consume little energy to work hours or even days using a lightweight battery. It should be flexible enough to integrate multiple applications and standards in one single device. It has to be designed and verified in short time-to-market despite substantially increased complexity. The designers are struggling to meet these huge challenges, which call for innovations of both architectures and design methodology. Coarse-grained reconfigurable architectures (CGRAs) are emerging as potential candidates to meet the above challenges. Many of them were proposed in recent years. This coarse granularity greatly reduces delay, area, power and configuration time compared with FPGAs. On the other hand, compared with traditional "coarse-grained" programmable processors, their massive computational resources enable them to achieve high parallelism and efficiency. However, existing CGRAs have yet been widely adopted mainly because of programming difficulty for such complex architecture. ADRES is a novel CGRA designed by Interuniversity Micro-Electronics Center (IMEC). It tightly couples a very-long instruction word (VLIW) processor and a coarse-grained array by providing two functional views on the same physical resources. It brings advantages such as high performance, low communication overhead and easiness of programming. Finally, ADRES is a template instead of a concrete architecture. With the retargetable compilation support from DRESC (Dynamically Reconfigurable Embedded System Compile), architectural exploration becomes possible to discover better architectures or design domain-specific architectures. In this thesis, a performance of an MPEG-4 encoder in ADRES is presented. The thesis shows the code evolution to obtain a good implementation for a given architecture. The main features of ADRES and its compiler (DRESC) are presented. The objectives are to reduce as much as possible the amount of cycles (time) spent to encode video in MPEG-4 and test different issues working with ADRES environment. The cycles decrease a 67% comparing initial and final code in VLIW and 84% between initial VLIW and CGA mode.Director/a: Moisès Serra i SerraSupervisor: Eric Delfoss

Simulation Native des Systèmes Multiprocesseurs sur Puce à l'aide de la Virtualisation Assistée par le Matériel

L'intégration de plusieurs processeurs hétérogènes en un seul système sur puce (SoC) est une tendance claire dans les systèmes embarqués. La conception et la vérification de ces systèmes nécessitent des plateformes rapides de simulation, et faciles à construire. Parmi les approches de simulation de logiciels, la simulation native est un bon candidat grâce à l'exécution native de logiciel embarqué sur la machine hôte, ce qui permet des simulations à haute vitesse, sans nécessiter le développement de simulateurs d'instructions. Toutefois, les techniques de simulation natives existantes exécutent le logiciel de simulation dans l'espace de mémoire partagée entre le matériel modélisé et le système d'exploitation hôte. Il en résulte de nombreux problèmes, par exemple les conflits l'espace d'adressage et les chevauchements de mémoire ainsi que l'utilisation des adresses de la machine hôte plutôt des celles des plates-formes matérielles cibles. Cela rend pratiquement impossible la simulation native du code existant fonctionnant sur la plate-forme cible. Pour surmonter ces problèmes, nous proposons l'ajout d'une couche transparente de traduction de l'espace adressage pour séparer l'espace d'adresse cible de celui du simulateur de hôte. Nous exploitons la technologie de virtualisation assistée par matériel (HAV pour Hardware-Assisted Virtualization) à cet effet. Cette technologie est maintenant disponibles sur plupart de processeurs grande public à usage général. Les expériences montrent que cette solution ne dégrade pas la vitesse de simulation native, tout en gardant la possibilité de réaliser l'évaluation des performances du logiciel simulé. La solution proposée est évolutive et flexible et nous fournit les preuves nécessaires pour appuyer nos revendications avec des solutions de simulation multiprocesseurs et hybrides. Nous abordons également la simulation d'exécutables cross- compilés pour les processeurs VLIW (Very Long Instruction Word) en utilisant une technique de traduction binaire statique (SBT) pour généré le code natif. Ainsi il n'est pas nécessaire de faire de traduction à la volée ou d'interprétation des instructions. Cette approche est intéressante dans les situations où le code source n'est pas disponible ou que la plate-forme cible n'est pas supporté par les compilateurs reciblable, ce qui est généralement le cas pour les processeurs VLIW. Les simulateurs générés s'exécutent au-dessus de notre plate-forme basée sur le HAV et modélisent les processeurs de la série C6x de Texas Instruments (TI). Les résultats de simulation des binaires pour VLIW montrent une accélération de deux ordres de grandeur par rapport aux simulateurs précis au cycle près.Integration of multiple heterogeneous processors into a single System-on-Chip (SoC) is a clear trend in embedded systems. Designing and verifying these systems require high-speed and easy-to-build simulation platforms. Among the software simulation approaches, native simulation is a good candidate since the embedded software is executed natively on the host machine, resulting in high speed simulations and without requiring instruction set simulator development effort. However, existing native simulation techniques execute the simulated software in memory space shared between the modeled hardware and the host operating system. This results in many problems, including address space conflicts and overlaps as well as the use of host machine addresses instead of the target hardware platform ones. This makes it practically impossible to natively simulate legacy code running on the target platform. To overcome these issues, we propose the addition of a transparent address space translation layer to separate the target address space from that of the host simulator. We exploit the Hardware-Assisted Virtualization (HAV) technology for this purpose, which is now readily available on almost all general purpose processors. Experiments show that this solution does not degrade the native simulation speed, while keeping the ability to accomplish software performance evaluation. The proposed solution is scalable as well as flexible and we provide necessary evidence to support our claims with multiprocessor and hybrid simulation solutions. We also address the simulation of cross-compiled Very Long Instruction Word (VLIW) executables, using a Static Binary Translation (SBT) technique to generated native code that does not require run-time translation or interpretation support. This approach is interesting in situations where either the source code is not available or the target platform is not supported by any retargetable compilation framework, which is usually the case for VLIW processors. The generated simulators execute on top of our HAV based platform and model the Texas Instruments (TI) C6x series processors. Simulation results for VLIW binaries show a speed-up of around two orders of magnitude compared to the cycle accurate simulators.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

A hardware-software codesign framework for cellular computing

Until recently, the ever-increasing demand of computing power has been met on one hand by increasing the operating frequency of processors and on the other hand by designing architectures capable of exploiting parallelism at the instruction level through hardware mechanisms such as super-scalar execution. However, both these approaches seem to have reached a plateau, mainly due to issues related to design complexity and cost-effectiveness. To face the stabilization of performance of single-threaded processors, the current trend in processor design seems to favor a switch to coarser-grain parallelization, typically at the thread level. In other words, high computational power is achieved not only by a single, very fast and very complex processor, but through the parallel operation of several processors, each executing a different thread. Extrapolating this trend to take into account the vast amount of on-chip hardware resources that will be available in the next few decades (either through further shrinkage of silicon fabrication processes or by the introduction of molecular-scale devices), together with the predicted features of such devices (e.g., the impossibility of global synchronization or higher failure rates), it seems reasonable to foretell that current design techniques will not be able to cope with the requirements of next-generation electronic devices and that novel design tools and programming methods will have to be devised. A tempting source of inspiration to solve the problems implied by a massively parallel organization and inherently error-prone substrates is biology. In fact, living beings possess characteristics, such as robustness to damage and self-organization, which were shown in previous research as interesting to be implemented in hardware. For instance, it was possible to realize relatively simple systems, such as a self-repairing watch. Overall, these bio-inspired approaches seem very promising but their interest for a wider audience is problematic because their heavily hardware-oriented designs lack some of the flexibility achievable with a general purpose processor. In the context of this thesis, we will introduce a processor-grade processing element at the heart of a bio-inspired hardware system. This processor, based on a single-instruction, features some key properties that allow it to maintain the versatility required by the implementation of bio-inspired mechanisms and to realize general computation. We will also demonstrate that the flexibility of such a processor enables it to be evolved so it can be tailored to different types of applications. In the second half of this thesis, we will analyze how the implementation of a large number of these processors can be used on a hardware platform to explore various bio-inspired mechanisms. Based on an extensible platform of many FPGAs, configured as a networked structure of processors, the hardware part of this computing framework is backed by an open library of software components that provides primitives for efficient inter-processor communication and distributed computation. We will show that this dual software–hardware approach allows a very quick exploration of different ways to solve computational problems using bio-inspired techniques. In addition, we also show that the flexibility of our approach allows it to exploit replication as a solution to issues that concern standard embedded applications

Green radios systems

Essential overview of GRS implementation scenarios. The needs of GRS and some concrete cases exampleope

Instruction scheduling optimizations for energy efficient VLIW processors

Very Long Instruction Word (VLIW) processors are wide-issue statically scheduled processors. Instruction scheduling for these processors is performed by the compiler and is therefore a critical factor for its operation. Some VLIWs are clustered, a design that improves scalability to higher issue widths while improving energy efficiency and frequency. Their design is based on physically partitioning the shared hardware resources (e.g., register file). Such designs further increase the challenges of instruction scheduling since the compiler has the additional tasks of deciding on the placement of the instructions to the corresponding clusters and orchestrating the data movements across clusters. In this thesis we propose instruction scheduling optimizations for energy-efficient VLIW processors. Some of the techniques aim at improving the existing state-of-theart scheduling techniques, while others aim at using compiler techniques for closing the gap between lightweight hardware designs and more complex ones. Each of the proposed techniques target individual features of energy efficient VLIW architectures. Our first technique, called Aligned Scheduling, makes use of a novel scheduling heuristic for hiding memory latencies in lightweight VLIW processors without hardware load-use interlocks (Stall-On-Miss). With Aligned Scheduling, a software-only technique, a SOM processor coupled with non-blocking caches can better cope with the cache latencies and it can perform closer to the heavyweight designs. Performance is improved by up to 20% across a range of benchmarks from the Mediabench II and SPEC CINT2000 benchmark suites. The rest of the techniques target a class of VLIW processors known as clustered VLIWs, that are more scalable and more energy efficient and operate at higher frequencies than their monolithic counterparts. The second scheme (LUCAS) is an improved scheduler for clustered VLIW processors that solves the problem of the existing state-of-the-art schedulers being very susceptible to the inter-cluster communication latency. The proposed unified clustering and scheduling technique is a hybrid scheme that performs instruction by instruction switching between the two state-of-the-art clustering heuristics, leading to better scheduling than either of them. It generates better performing code compared to the state-of-the-art for a wide range of inter-cluster latency values on the Mediabench II benchmarks. The third technique (called CAeSaR) is a scheduler for clustered VLIW architectures that minimizes inter-cluster communication by local caching and reuse of already received data. Unlike dynamically scheduled processors, where this can be supported by the register renaming hardware, in VLIWs it has to be done by the code generator. The proposed instruction scheduler unifies cluster assignment, instruction scheduling and communication minimization in a single unified algorithm, solving the phase ordering issues between all three parts. The proposed scheduler shows an improvement in execution time of up to 20.3% and 13.8% on average across a range of benchmarks from the Mediabench II and SPEC CINT2000 benchmark suites. The last technique, applies to heterogeneous clustered VLIWs that support dynamic voltage and frequency scaling (DVFS) independently per cluster. In these processors there are no hardware interlocks between clusters to honor the data dependencies. Instead, the scheduler has to be aware of the DVFS decisions to guarantee correct execution. Effectively controlling DVFS, to selectively decrease the frequency of clusters with slack in their schedule, can lead to significant energy savings. The proposed technique (called UCIFF) solves the phase ordering problem between frequency selection and scheduling that is present in existing algorithms. The results show that UCIFF produces better code than the state-of-the-art and very close to the optimal across the Mediabench II benchmarks. Overall, the proposed instruction scheduling techniques lead to either better efficiency on existing designs or allow simpler lightweight designs to be competitive against ones with more complex hardware