PHALANX: Expendable Projectile Sensor Networks for Planetary Exploration

Technologies enabling long-term, wide-ranging measurement in hard-to-reach areas are a critical need for planetary science inquiry. Phenomena of interest include flows or variations in volatiles, gas composition or concentration, particulate density, or even simply temperature. Improved measurement of these processes enables understanding of exotic geologies and distributions or correlating indicators of trapped water or biological activity. However, such data is often needed in unsafe areas such as caves, lava tubes, or steep ravines not easily reached by current spacecraft and planetary robots. To address this capability gap, we have developed miniaturized, expendable sensors which can be ballistically lobbed from a robotic rover or static lander - or even dropped during a flyover. These projectiles can perform sensing during flight and after anchoring to terrain features. By augmenting exploration systems with these sensors, we can extend situational awareness, perform long-duration monitoring, and reduce utilization of primary mobility resources, all of which are crucial in surface missions. We call the integrated payload that includes a cold gas launcher, smart projectiles, planning software, network discovery, and science sensing: PHALANX. In this paper, we introduce the mission architecture for PHALANX and describe an exploration concept that pairs projectile sensors with a rover mothership. Science use cases explored include reconnaissance using ballistic cameras, volatiles detection, and building timelapse maps of temperature and illumination conditions. Strategies to autonomously coordinate constellations of deployed sensors to self-discover and localize with peer ranging (i.e. a local GPS) are summarized, thus providing communications infrastructure beyond-line-of-sight (BLOS) of the rover. Capabilities were demonstrated through both simulation and physical testing with a terrestrial prototype. The approach to developing a terrestrial prototype is discussed, including design of the launching mechanism, projectile optimization, micro-electronics fabrication, and sensor selection. Results from early testing and characterization of commercial-off-the-shelf (COTS) components are reported. Nodes were subjected to successful burn-in tests over 48 hours at full logging duty cycle. Integrated field tests were conducted in the Roverscape, a half-acre planetary analog environment at NASA Ames, where we tested up to 10 sensor nodes simultaneously coordinating with an exploration rover. Ranging accuracy has been demonstrated to be within +/-10cm over 20m using commodity radios when compared to high-resolution laser scanner ground truthing. Evolution of the design, including progressive miniaturization of the electronics and iterated modifications of the enclosure housing for streamlining and optimized radio performance are described. Finally, lessons learned to date, gaps toward eventual flight mission implementation, and continuing future development plans are discussed

AI and IoT Meet Mobile Machines: Towards a Smart Working Site

Infrastructure construction is society's cornerstone and economics' catalyst. Therefore, improving mobile machinery's efficiency and reducing their cost of use have enormous economic benefits in the vast and growing construction market. In this thesis, I envision a novel concept smart working site to increase productivity through fleet management from multiple aspects and with Artificial Intelligence (AI) and Internet of Things (IoT)

AI and IoT Meet Mobile Machines

Infrastructure construction is society's cornerstone and economics' catalyst. Therefore, improving mobile machinery's efficiency and reducing their cost of use have enormous economic benefits in the vast and growing construction market. In this thesis, I envision a novel concept smart working site to increase productivity through fleet management from multiple aspects and with Artificial Intelligence (AI) and Internet of Things (IoT)

Towards secure & robust PNT for automated systems

This dissertation makes four contributions in support of secure and robust position, navigation, and timing (PNT) for automated systems. The first two relate to PNT security while the latter two address robust positioning for automated ground vehicles. The first contribution is a fundamental theory for provably-secure clock synchronization between two agents in a distributed automated system. All one-way synchronization protocols, such as those based on the Global Positioning System (GPS) and other Global Navigation Satellite Systems (GNSS), are shown to be vulnerable to man-in-the-middle delay attacks. This contribution is the first to identify the necessary and sufficient conditions for provably secure clock synchronization. The second contribution, also related to PNT security, is a three-year study of the world-wide GPS interference landscape based on data from a dual-frequency GNSS receiver operating continuously on the International Space Station (ISS). This work is the first publicly-reported space-based survey of GNSS interference, and unveils previously-unreported GNSS interference activity. The third contribution is a novel ground vehicle positioning technique that is robust to GNSS signal blockage, poor lighting conditions, and adverse weather events such as heavy rain and dense fog. The technique relies on sensors that are commonly available on automated vehicles and are insensitive to lighting and inclement weather: automotive radar, low-cost inertial measurement units (IMUs), and GNSS. Remarkably, it is shown that, given a prior radar map, the proposed technique operating on data from off-the-shelf all-weather automotive sensors can maintain sub-50-cm horizontal position accuracy during 60 min of GNSS-denied driving in downtown Austin, TX. This dissertation’s final contribution is an analysis and demonstration of the feasibility of crowd-sourced digital mapping for automated vehicles. Localization techniques, such as the one described in the previous contribution, rely on such digital maps for accuracy and robustness. A key enabler for large-scale up-to-date maps is enlisting the help of the very consumer vehicles that need the map to build and update it. A method for fusing multi-session vision data into a unified digital map is developed. The asymptotic limit of such a map’s globally-referenced position accuracy is explored for the case in which the mapping agents rely on low-cost GNSS receivers performing standard code-phase-based navigation. Experimental validation along a semi-urban route shows that low-cost consumer vehicles incrementally tighten the accuracy of the jointly-optimized digital map over time enough to support sub-lane-level positioning in a global frame of reference.Electrical and Computer Engineerin

Bridge Inspection: Human Performance, Unmanned Aerial Systems and Automation

Unmanned aerial systems (UASs) have become of considerable private and commercial interest for a variety of jobs and entertainment in the past 10 years. This paper is a literature review of the state of practice for the United States bridge inspection programs and outlines how automated and unmanned bridge inspections can be made suitable for present and future needs. At its best, current technology limits UAS use to an assistive tool for the inspector to perform a bridge inspection faster, safer, and without traffic closure. The major challenges for UASs are satisfying restrictive Federal Aviation Administration regulations, control issues in a GPS-denied environment, pilot expenses and availability, time and cost allocated to tuning, maintenance, post-processing time, and acceptance of the collected data by bridge owners. Using UASs with self-navigation abilities and improving image-processing algorithms to provide results near real-time could revolutionize the bridge inspection industry by providing accurate, multi-use, autonomous three-dimensional models and damage identification

Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery

One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions