Design of asynchronous microprocessor for power proportionality

PhD ThesisMicroprocessors continue to get exponentially cheaper for end users following Moore’s law, while the costs involved in their design keep growing, also at an exponential rate. The reason is the ever increasing complexity of processors, which modern EDA tools struggle to keep up with. This makes further scaling for performance subject to a high risk in the reliability of the system. To keep this risk low, yet improve the performance, CPU designers try to optimise various parts of the processor. Instruction Set Architecture (ISA) is a significant part of the whole processor design flow, whose optimal design for a particular combination of available hardware resources and software requirements is crucial for building processors with high performance and efficient energy utilisation. This is a challenging task involving a lot of heuristics and high-level design decisions. Another issue impacting CPU reliability is continuous scaling for power consumption. For the last decades CPU designers have been mainly focused on improving performance, but “keeping energy and power consumption in mind”. The consequence of this was a development of energy-efficient systems, where energy was considered as a resource whose consumption should be optimised. As CMOS technology was progressing, with feature size decreasing and power delivered to circuit components becoming less stable, the energy resource turned from an optimisation criterion into a constraint, sometimes a critical one. At this point power proportionality becomes one of the most important aspects in system design. Developing methods and techniques which will address the problem of designing a power-proportional microprocessor, capable to adapt to varying operating conditions (such as low or even unstable voltage levels) and application requirements in the runtime, is one of today’s grand challenges. In this thesis this challenge is addressed by proposing a new design flow for the development of an ISA for microprocessors, which can be altered to suit a particular hardware platform or a specific operating mode. This flow uses an expressive and powerful formalism for the specification of processor instruction sets called the Conditional Partial Order Graph (CPOG). The CPOG model captures large sets of behavioural scenarios for a microarchitectural level in a computationally efficient form amenable to formal transformations for synthesis, verification and automated derivation of asynchronous hardware for the CPU microcontrol. The feasibility of the methodology, novel design flow and a number of optimisation techniques was proven in a full size asynchronous Intel 8051 microprocessor and its demonstrator silicon. The chip showed the ability to work in a wide range of operating voltage and environmental conditions. Depending on application requirements and power budget our ASIC supports several operating modes: one optimised for energy consumption and the other one for performance. This was achieved by extending a traditional datapath structure with an auxiliary control layer for adaptable and fault tolerant operation. These and other optimisations resulted in a reconfigurable and adaptable implementation, which was proven by measurements, analysis and evaluation of the chip.EPSR

Master of Science

thesisIntegrated circuits often consist of multiple processing elements that are regularly tiled across the two-dimensional surface of a die. This work presents the design and integration of high speed relative timed routers for asynchronous network-on-chip. It researches NoC's efficiency through simplicity by directly translating simple T-router, source-routing, single-flit packet to higher radix routers. This work is intended to study performance and power trade-offs adding higher radix routers, 3D topologies, Virtual Channels, Accurate NoC modeling, and Transmission line communication links. Routers with and without virtual channels are designed and integrated to arrayed communication networks. Furthermore, the work investigates 3D networks with diffusive RC wires and transmission lines on long wrap interconnects

Network Interface Design for Network-on-Chip

In the culture of globalized integrated circuit (IC, a.k.a chip) production, the use of Intellectual Property (IP) cores, computer aided design tools (CAD) and testing services from un-trusted vendors are prevalent to reduce the time to market. Unfortunately, the globalized business model potentially creates opportunities for hardware tampering and modification from adversary, and this tampering is known as hardware Trojan (HT). Network-on-chip (NoC) has emerged as an efficient on-chip communication infrastructure. In this work, the security aspects of NoC network interface (NI), one of the most critical components in NoC will be investigated and presented. Particularly, the NI design, hardware attack models and countermeasures for NI in a NoC system are explored. An OCP compatible NI is implemented in an IBM0.18ìm CMOS technology. The synthesis results are presented and compared with existing literature. Second, comprehensive hardware attack models targeted for NI are presented from system level to circuit level. The impact of hardware Trojans on NoC functionality and performance are evaluated. Finally, a countermeasure method is proposed to address the hardware attacks in NIs

Asynchronous nanowire crossbar architecture for manufacturability, modularity and robustness

This thesis spotlights the dawn of a promising new nanowire crossbar architecture, the Asynchronous crossbar architecture, in the form of three different articles. It combines the reduced size of the nanowire crossbar architecture with the clock-free nature of Null Conventional Logic, which are the primary advantages. The first paper explains the proposed architecture with illustrations, including the design of an optimized full adder. This architecture has an elementary structure termed as a Programmable Gate Macro Block (PGMB) which is analogous to a threshold gate in NCL. The other two papers concentrate on mapping and placement techniques which are important due to defects involved in crossbars. These defects have to be tolerated and logic has to be routed appropriately for successful functioning of the circuit --Introduction, page 1

Asynchronous techniques for new generation variation-tolerant FPGA

PhD ThesisThis thesis presents a practical scenario for asynchronous logic implementation that would benefit the modern Field-Programmable Gate Arrays (FPGAs) technology in improving reliability. A method based on Asynchronously-Assisted Logic (AAL) blocks is proposed here in order to provide the right degree of variation tolerance, preserve as much of the traditional FPGAs structure as possible, and make use of asynchrony only when necessary or beneficial for functionality. The newly proposed AAL introduces extra underlying hard-blocks that support asynchronous interaction only when needed and at minimum overhead. This has the potential to avoid the obstacles to the progress of asynchronous designs, particularly in terms of area and power overheads. The proposed approach provides a solution that is complementary to existing variation tolerance techniques such as the late-binding technique, but improves the reliability of the system as well as reducing the design’s margin headroom when implemented on programmable logic devices (PLDs) or FPGAs. The proposed method suggests the deployment of configurable AAL blocks to reinforce only the variation-critical paths (VCPs) with the help of variation maps, rather than re-mapping and re-routing. The layout level results for this method's worst case increase in the CLB’s overall size only of 6.3%. The proposed strategy retains the structure of the global interconnect resources that occupy the lion’s share of the modern FPGA’s soft fabric, and yet permits the dual-rail iv completion-detection (DR-CD) protocol without the need to globally double the interconnect resources. Simulation results of global and interconnect voltage variations demonstrate the robustness of the method

Physical design of USB1.1

In earlier days, interfacing peripheral devices to host computer has a big problematic. There existed so many different kinds’ ports like serial port, parallel port, PS/2 etc. And their use restricts many situations, Such as no hot-pluggability and involuntary configuration. There are very less number of methods to connect the peripheral devices to host computer. The main reason that Universal Serial Bus was implemented to provide an additional benefits compared to earlier interfacing ports. USB is designed to allow many peripheral be connecting using single standardize interface. It provides an expandable fast, cost effective, hot-pluggable plug and play serial hardware interface that makes life of computer user easier allowing them to plug different devices to into USB port and have them configured automatically. In this thesis demonstrated the USB v1.1 architecture part in briefly and generated gate level net list form RTL code by applying the different constraints like timing, area and power. By applying the various types design constraints so that the performance was improved by 30%. And then it implemented in physically by using SoC encounter EDI system, estimation of chip size, power analysis and routing the clock signal to all flip-flops presented in the design. To reduce the clock switching power implemented register clustering algorithm (DBSCAN). In this design implementation TSMC 180nm technology library is used