1,106 research outputs found
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks
In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Optimization of Energy Aware Path Routing Protocol in Wireless Sensor Networks
Strength conservation is one of the biggest challenges to the successful WSNs since the tiny very limited resource nodes such as energy, memory space| as well as communication and computation capabilities. the sensors are unattended Implemented and battery recharge is almost impossible. So many investigations have be done in redirecting energy efficient algorithms or protocols for WSNs. Our reasons behinds the study of number is based on the following three aspects. Initially of all First, we see That immediate transmittal is employed under small scale while multi-hop network transmittal network is employed under mass. All of us want to find the Which factors influence the transmittal manner. Second, it is Commonly That multi-hop agree transmitting more energy efficient than Usually transmitting When the average solitary source to destination distance is large. Yet ,}how to look for the optimal hop number in order That the overall energy consumption is nominal is not well tackled. Third, the hot location phenomenon the networking lifetime influences directly. After that all of us recommend to Optimization of energy aware routing path (OEAPR) algorithm, Which incorporate the overall routing mechanism With hop-based direction-finding nature During process in WSNs
Joint optimization for wireless sensor networks in critical infrastructures
Energy optimization represents one of the main goals in wireless sensor network design
where a typical sensor node has usually operated by making use of the battery with
limited-capacity. In this thesis, the following main problems are addressed: first, the
joint optimization of the energy consumption and the delay for conventional wireless sensor networks is presented. Second, the joint optimization of the information quality and
energy consumption of the wireless sensor networks based structural health monitoring
is outlined. Finally, the multi-objectives optimization of the former problem under several constraints is shown. In the first main problem, the following points are presented:
we introduce a joint multi-objective optimization formulation for both energy and delay
for most sensor nodes in various applications. Then, we present the Karush-Kuhn-Tucker
analysis to demonstrate the optimal solution for each formulation. We introduce a method
of determining the knee on the Pareto front curve, which meets the network designer interest for focusing on more practical solutions. The sensor node placement optimization has
a significant role in wireless sensor networks, especially in structural health monitoring.
In the second main problem of this work, the existing work optimizes the node placement
and routing separately (by performing routing after carrying out the node placement).
However, this approach does not guarantee the optimality of the overall solution. A joint
optimization of sensor placement, routing, and flow assignment is introduced and is solved
using mixed-integer programming modelling. In the third main problem of this study, we
revisit the placement problem in wireless sensor networks of structural health monitoring by using multi-objective optimization. Furthermore, we take into consideration more
constraints that were not taken into account before. This includes the maximum capacity
per link and the node-disjoint routing. Since maximum capacity constraint is essential
to study the data delivery over limited-capacity wireless links, node-disjoint routing is
necessary to achieve load balancing and longer wireless sensor networks lifetime. We list
the results of the previous problems, and then we evaluate the corresponding results
Socio-economic aware data forwarding in mobile sensing networks and systems
The vision for smart sustainable cities is one whereby urban sensing is core to optimising city
operation which in turn improves citizen contentment. Wireless Sensor Networks are envisioned
to become pervasive form of data collection and analysis for smart cities but deployment of
millions of inter-connected sensors in a city can be cost-prohibitive. Given the ubiquity and
ever-increasing capabilities of sensor-rich mobile devices, Wireless Sensor Networks with Mobile
Phones (WSN-MP) provide a highly flexible and ready-made wireless infrastructure for future
smart cities. In a WSN-MP, mobile phones not only generate the sensing data but also relay the
data using cellular communication or short range opportunistic communication. The largest
challenge here is the efficient transmission of potentially huge volumes of sensor data over
sometimes meagre or faulty communications networks in a cost-effective way.
This thesis investigates distributed data forwarding schemes in three types of WSN-MP: WSN
with mobile sinks (WSN-MS), WSN with mobile relays (WSN-HR) and Mobile Phone Sensing
Systems (MPSS). For these dynamic WSN-MP, realistic models are established and distributed
algorithms are developed for efficient network performance including data routing and forwarding,
sensing rate control and and pricing. This thesis also considered realistic urban sensing
issues such as economic incentivisation and demonstrates how social network and mobility
awareness improves data transmission. Through simulations and real testbed experiments, it
is shown that proposed algorithms perform better than state-of-the-art schemes.Open Acces
Exploiting the power of multiplicity: a holistic survey of network-layer multipath
The Internet is inherently a multipath network: For an underlying network with only a single path, connecting various nodes would have been debilitatingly fragile. Unfortunately, traditional Internet technologies have been designed around the restrictive assumption of a single working path between a source and a destination. The lack of native multipath support constrains network performance even as the underlying network is richly connected and has redundant multiple paths. Computer networks can exploit the power of multiplicity, through which a diverse collection of paths is resource pooled as a single resource, to unlock the inherent redundancy of the Internet. This opens up a new vista of opportunities, promising increased throughput (through concurrent usage of multiple paths) and increased reliability and fault tolerance (through the use of multiple paths in backup/redundant arrangements). There are many emerging trends in networking that signify that the Internet's future will be multipath, including the use of multipath technology in data center computing; the ready availability of multiple heterogeneous radio interfaces in wireless (such as Wi-Fi and cellular) in wireless devices; ubiquity of mobile devices that are multihomed with heterogeneous access networks; and the development and standardization of multipath transport protocols such as multipath TCP. The aim of this paper is to provide a comprehensive survey of the literature on network-layer multipath solutions. We will present a detailed investigation of two important design issues, namely, the control plane problem of how to compute and select the routes and the data plane problem of how to split the flow on the computed paths. The main contribution of this paper is a systematic articulation of the main design issues in network-layer multipath routing along with a broad-ranging survey of the vast literature on network-layer multipathing. We also highlight open issues and identify directions for future work
- …