Comparison of multi-layer bus interconnection and a network on chip solution

Abstract. This thesis explains the basic subjects that are required to take in consideration when designing a network on chip solutions in the semiconductor world. For example, general topologies such as mesh, torus, octagon and fat tree are explained. In addition, discussion related to network interfaces, switches, arbitration, flow control, routing, error avoidance and error handling are provided. Furthermore, there is discussion related to design flow, a computer aided designing tools and a few comprehensive researches. However, several networks are designed for the minimum latency, although there are also versions which trade performance for decreased bus widths. These designed networks are compared with a corresponding multi-layer bus interconnection and both synthesis and register transfer level simulations are run. For example, results from throughput, latency, logic area and power consumptions are gathered and compared. It was discovered that overall throughput was well balanced with the network on chip solutions, although its maximum throughput was limited by protocol conversions. For example, the multi-layer bus interconnection was capable of providing a few times smaller latencies and higher throughputs when only a single interface was injected at the time. However, with parallel traffic and high-performance requirements a network on chip solution provided better results, even though the difference decreased when performance requirements were lower. Furthermore, it was discovered that the network on chip solutions required approximately 3–4 times higher total cell area than the multi-layer bus interconnection and that resources were mainly located at network interfaces and switches. In addition, power consumption was approximately 2–3 times higher and was mostly caused by dynamic consumption.Monitasoisen väyläarkkitehtuurin ja tietokoneverkkomaisen ratkaisun vertailua. Tiivistelmä. Tutkielmassa käsitellään tärkeimpiä aihealueita, jotka tulee huomioida suunniteltaessa tietokoneverkkomaisia väyläratkaisuja puolijohdemaailmassa. Esimerkiksi yleiset rakenteet, kuten verkko-, torus-, kahdeksankulmio- ja puutopologiat käsitellään lyhyesti. Lisäksi alustetaan verkon liitäntäkohdat, kytkimet, vuorottelu, vuon hallinta, reititys, virheiden välttely ja -käsittely. Lopuksi kerrotaan suunnitteluvuon oleellisimmat välivaiheet ja niihin soveltuvia kaupallisia työkaluja, sekä käsitellään lyhyesti muutaman aiemman julkaisun tuloksia. Tutkielmassa käytetään suunnittelutyökalua muutaman tietokoneverkkomaisen ratkaisun toteutukseen ja tavoitteena on saavuttaa pienin mahdollinen latenssi. Toisaalta myös hieman suuremman latenssin versioita suunnitellaan, mutta pienemmillä väylänleveyksillä. Lisäksi suunniteltuja tietokoneverkkomaisia ratkaisuja vertaillaan perinteisempään monitasoiseen väyläarkkitehtuuriin. Esimerkiksi synteesi- ja simulaatiotuloksia, kuten logiikan vaatimaa pinta-alaa, tehonkulutusta, latenssia ja suorituskykyä, vertaillaan keskenään. Tutkielmassa selvisi, että suunnittelutyökalulla toteutetut tietokoneverkkomaiset ratkaisut mahdollistivat tasaisemman suorituskyvyn, joskin niiden suurin saavutettu suorituskyky ja pienin latenssi määräytyivät protokollan käännöksen aiheuttamasta viiveestä. Tutkielmassa havaittiin, että perinteisemmillä menetelmillä saavutettiin noin kaksi kertaa suurempi suorituskyky ja pienempi latenssi, kun verkossa ei ollut muuta liikennettä. Rinnakkaisen liikenteen lisääntyessä tietokoneverkkomainen ratkaisu tarjosi keskimäärin paremman suorituskyvyn, kun sille asetetut tehokkuusvaateet olivat suuret, mutta suorituskykyvaatimuksien laskiessa erot kapenivat. Lisäksi huomattiin, että tietokoneverkkomaisten ratkaisujen käyttämä pinta-ala oli noin 3–4 kertaa suurempi kuin monitasoisella väyläarkkitehtuurilla ja että resurssit sijaitsivat enimmäkseen verkon liittymäkohdissa ja kytkimissä. Lisäksi tehonkulutuksen huomattiin olevan noin 2–3 kertaa suurempi, joskin sen havaittiin koostuvan pääosin dynaamisesta kulutuksesta

Round Robin based Arbitration Mechanism for Signaling Approach based Router Architecture

In Network-on-Chip the effectiveness of the network resource allocation is demonstrated by the flow control mechanism. There are two types of flow control mechanisms: buffered and bufferless. Compared to buffered flow control methods, buffer less flow control mechanisms are easier to use, need less power, and take up less space. When there are congestion and resource conflicts, it experiences higher packet loss and packet misrouting inside the network. A good buffered control mechanism useful as it overcomes the limitations of buffer less mechanism. There are numerous buffered and bufferless flow control methods available. In this paper, signaling-based Virtual Output Queue Router Arbiter Mechanism is used to explore credit-based flow control. This mechanism worked on new concept that is “stress value”. This information is generated in the form of credit whenever any input buffer has free space. Then, using this credit data, the node's stress value is determined. Free buffer space takes precedence over stress value if it is bigger. The stress value will increase if there is less available buffer space. To handle the congestion problem, the signaling block then sends this stress value to a neighboring router. To help the arbitrator make a more accurate decision, the crediting system constantly operates in tandem with arbitration

Fuse-N: Framework for unified simulation environment for network-on-chip

Steady advancements in semiconductor technology over the past few decades have marked incipience of Multi-Processor System-on-Chip (MPSoCs). Owing to the inability of traditional bus-based communication system to scale well with improving microchip technologies, researchers have proposed Network-on-Chip (NoC) as the on-chip communication model. Current uni-processor centric modeling methodology does not address the new design challenges introduced by MPSoCs, thus calling for efficient simulation frameworks capable of capturing the interplay between the application, the architecture, and the network. Addressing these new challenges requires a framework that assists the designer at different abstraction levels of system design; This thesis concentrates on developing a framework for unified simulation environment for NoCs (fuse-N) which simplifies the design space exploration for NoCs by offering a comprehensive simulation support. The framework synthesizes the network infrastructure and the communication model and optimizes application mapping for design constraints. The proposed framework is a hardware-software co-design implementation using SystemC 2.1 and C++. Simulation results show the architectural, network and resource allocation behavior and highlight the quantitative relationships between various design choices; Also, a novel off-line non-preemptive static Traffic Aware Scheduling (TAS) policy is proposed for hard NoC platforms. The proposed scheduling policy maps the application onto the NoC architecture keeping track of the network traffic, which is generated with every resource and communication path allocation. TAS has been evaluated for various design metrics such as application completion time, resource utilization and task throughput. Simulation results show significant improvements over traditional approaches

Adaptive Routing Approaches for Networked Many-Core Systems

Through advances in technology, System-on-Chip design is moving towards integrating tens to hundreds of intellectual property blocks into a single chip. In such a many-core system, on-chip communication becomes a performance bottleneck for high performance designs. Network-on-Chip (NoC) has emerged as a viable solution for the communication challenges in highly complex chips. The NoC architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication challenges such as wiring complexity, communication latency, and bandwidth. Furthermore, the combined benefits of 3D IC and NoC schemes provide the possibility of designing a high performance system in a limited chip area. The major advantages of 3D NoCs are the considerable reductions in average latency and power consumption. There are several factors degrading the performance of NoCs. In this thesis, we investigate three main performance-limiting factors: network congestion, faults, and the lack of efficient multicast support. We address these issues by the means of routing algorithms. Congestion of data packets may lead to increased network latency and power consumption. Thus, we propose three different approaches for alleviating such congestion in the network. The first approach is based on measuring the congestion information in different regions of the network, distributing the information over the network, and utilizing this information when making a routing decision. The second approach employs a learning method to dynamically find the less congested routes according to the underlying traffic. The third approach is based on a fuzzy-logic technique to perform better routing decisions when traffic information of different routes is available. Faults affect performance significantly, as then packets should take longer paths in order to be routed around the faults, which in turn increases congestion around the faulty regions. We propose four methods to tolerate faults at the link and switch level by using only the shortest paths as long as such path exists. The unique characteristic among these methods is the toleration of faults while also maintaining the performance of NoCs. To the best of our knowledge, these algorithms are the first approaches to bypassing faults prior to reaching them while avoiding unnecessary misrouting of packets. Current implementations of multicast communication result in a significant performance loss for unicast traffic. This is due to the fact that the routing rules of multicast packets limit the adaptivity of unicast packets. We present an approach in which both unicast and multicast packets can be efficiently routed within the network. While suggesting a more efficient multicast support, the proposed approach does not affect the performance of unicast routing at all. In addition, in order to reduce the overall path length of multicast packets, we present several partitioning methods along with their analytical models for latency measurement. This approach is discussed in the context of 3D mesh networks.Siirretty Doriast

Artificial intelligence (AI) methods in optical networks: A comprehensive survey

Producción CientíficaArtificial intelligence (AI) is an extensive scientific discipline which enables computer systems to solve problems by emulating complex biological processes such as learning, reasoning and self-correction. This paper presents a comprehensive review of the application of AI techniques for improving performance of optical communication systems and networks. The use of AI-based techniques is first studied in applications related to optical transmission, ranging from the characterization and operation of network components to performance monitoring, mitigation of nonlinearities, and quality of transmission estimation. Then, applications related to optical network control and management are also reviewed, including topics like optical network planning and operation in both transport and access networks. Finally, the paper also presents a summary of opportunities and challenges in optical networking where AI is expected to play a key role in the near future.Ministerio de Economía, Industria y Competitividad (Project EC2014-53071-C3-2-P, TEC2015-71932-REDT

Configurable data center switch architectures

In this thesis, we explore alternative architectures for implementing con_gurable Data Center Switches along with the advantages that can be provided by such switches. Our first contribution centers around determining switch architectures that can be implemented on Field Programmable Gate Array (FPGA) to provide configurable switching protocols. In the process, we identify a gap in the availability of frameworks to realistically evaluate the performance of switch architectures in data centers and contribute a simulation framework that relies on realistic data center traffic patterns. Our framework is then used to evaluate the performance of currently existing as well as newly proposed FPGA-amenable switch designs. Through collaborative work with Meng and Papaphilippou, we establish that only small-medium range switches can be implemented on today's FPGAs. Our second contribution is a novel switch architecture that integrates a custom in-network hardware accelerator with a generic switch to accelerate Deep Neural Network training applications in data centers. Our proposed accelerator architecture is prototyped on an FPGA, and a scalability study is conducted to demonstrate the trade-offs of an FPGA implementation when compared to an ASIC implementation. In addition to the hardware prototype, we contribute a light weight load-balancing and congestion control protocol that leverages the unique communication patterns of ML data-parallel jobs to enable fair sharing of network resources across different jobs. Our large-scale simulations demonstrate the ability of our novel switch architecture and light weight congestion control protocol to both accelerate the training time of machine learning jobs by up to 1.34x and benefit other latency-sensitive applications by reducing their 99%-tile completion time by up to 4.5x. As for our final contribution, we identify the main requirements of in-network applications and propose a Network-on-Chip (NoC)-based architecture for supporting a heterogeneous set of applications. Observing the lack of tools to support such research, we provide a tool that can be used to evaluate NoC-based switch architectures.Open Acces

Development, production and performance testing of a three axes CNC router

Nowadays there are Computer Numerical Control (CNC) machines with up to 9 axes, which allow the fabrication of high complexity parts in a single machining operation. However, considering the cost and difficulty to operate, such machines are inadequate for most users. Even though there are very affordable options on the market, these are very limited in usable work volume and cutting capabilities. The present work focuses on the development and fabrication of a three axes CNC router that shows a good performance/cost relation. The performance can be translated as a combi-nation of a high volume of work with a good cutting precision and accuracy. The cutting pre-cision and accuracy are verified through a set of experiments designed for that purpose. The results obtained evidence that user with experience in building equipment can, with relative ease, create CNC routers as the one developed in this work. Additionally, a fourth axis was also considered for a future iteration of the machine.Atualmente existem máquinas controladas numericamente por computador (CNC) com até nove eixos, as quais permitem fabricar peças com elevada complexidade com uma única operação de fixação. No entanto, dado o custo e a dificuldade de operação destas máquinas para muitos utilizadores estes equipamentos são desadequados. Por outro lado, existem no mercado máquinas ferramentas a custos acessíveis, mas que tendem a ser muito limitadas quanto ao volume de trabalho e à capacidade de corte. O trabalho desenvolvido centra-se no desenvolvimento e na fabricação de uma fresa-dora CNC de três eixos que apresente uma boa relação desempenho custo. O desempenho traduz-se na conjugação de um grande volume de trabalho com uma boa exatidão de corte. A exatidão do corte verifica-se através de um conjunto de ensaios elaborados com esse propósito. Os resultados obtidos evidenciam que os utilizadores com boa experiência na construção de equipamentos podem, com relativa facilidade, implementar fresadoras como a desenvolvida neste trabalho. Foi também considerada a implementação de um quarto eixo numa próxima versão da fresadora

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems