Scalable parallel communications

Coarse-grain parallelism in networking (that is, the use of multiple protocol processors running replicated software sending over several physical channels) can be used to provide gigabit communications for a single application. Since parallel network performance is highly dependent on real issues such as hardware properties (e.g., memory speeds and cache hit rates), operating system overhead (e.g., interrupt handling), and protocol performance (e.g., effect of timeouts), we have performed detailed simulations studies of both a bus-based multiprocessor workstation node (based on the Sun Galaxy MP multiprocessor) and a distributed-memory parallel computer node (based on the Touchstone DELTA) to evaluate the behavior of coarse-grain parallelism. Our results indicate: (1) coarse-grain parallelism can deliver multiple 100 Mbps with currently available hardware platforms and existing networking protocols (such as Transmission Control Protocol/Internet Protocol (TCP/IP) and parallel Fiber Distributed Data Interface (FDDI) rings); (2) scale-up is near linear in n, the number of protocol processors, and channels (for small n and up to a few hundred Mbps); and (3) since these results are based on existing hardware without specialized devices (except perhaps for some simple modifications of the FDDI boards), this is a low cost solution to providing multiple 100 Mbps on current machines. In addition, from both the performance analysis and the properties of these architectures, we conclude: (1) multiple processors providing identical services and the use of space division multiplexing for the physical channels can provide better reliability than monolithic approaches (it also provides graceful degradation and low-cost load balancing); (2) coarse-grain parallelism supports running several transport protocols in parallel to provide different types of service (for example, one TCP handles small messages for many users, other TCP's running in parallel provide high bandwidth service to a single application); and (3) coarse grain parallelism will be able to incorporate many future improvements from related work (e.g., reduced data movement, fast TCP, fine-grain parallelism) also with near linear speed-ups

Fault management and service provisioning process model of next generation access networks

Network operators are nowadays upgrading their access networks to cope with the increasing number of users and the increasing bandwidth required by services. However, cost plays a crucial factor. In order to decide which next generation access network will be implemented, an accurate cost evaluation should be performed. This evaluation requires a total cost of ownership model including a detailed model of the most costly operational processes: fault management and customer provisioning. These models help identifying the most costly sub-processes, where network providers should improve their cost efficiency. This paper presents detailed models for these operational processes and gives an approach to use them for estimating future operational costs

Techno-economics of Fiber vs. Microwave for Mobile Transport Network Deployments [Invited]

One of the challenges for network operators is to design and deploy cost-efficient transport networks (TNs) to meet the high capacity and strict latency/reliability requirements of today’s emerging services. Therefore, they need to consider different aspects, including the appropriate technology, the level of reconfigurability, and the functional split option. A crucial aspect of network design is assessing the impact of these aspects against the total cost of ownership (TCO), latency, and reliability performance of a given solution. For this reason, this paper proposes a framework to investigate the TCO, latency, and reliability performance of a set of fiber and microwave-based TN architectures. They are categorized based on their baseband functional split option and the reconfigurability capabilities of the equipment used. The results, based on real data from a non-incumbent operator, show that in most of the considered scenarios, a microwavebased TN exhibits lower TCO than a fiber-based one. The TCO gain may vary with the choice of the functional split option, geo-type, reconfigurability features, fiber trenching costs, and cost of microwave equipment, with a more significant impact in a dense urban geo-type, where for a low layer functional split option the fiber- and microwave-based architectures have a comparable TCO. Finally, it was found that the considered fiber and microwave architectures have almost similar average latency and connection availability performance. Both are suitable to meet the service requirements of 5G and beyond 5G services in most of the considered scenarios. Only in extreme latency-critical scenarios, a small number of the cells might not fully satisfy the latency requirements of a low layer split option due to multiple microwave hops in the microwave-based architecture

Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions

Traditional power grids are being transformed into Smart Grids (SGs) to address the issues in existing power system due to uni-directional information flow, energy wastage, growing energy demand, reliability and security. SGs offer bi-directional energy flow between service providers and consumers, involving power generation, transmission, distribution and utilization systems. SGs employ various devices for the monitoring, analysis and control of the grid, deployed at power plants, distribution centers and in consumers' premises in a very large number. Hence, an SG requires connectivity, automation and the tracking of such devices. This is achieved with the help of Internet of Things (IoT). IoT helps SG systems to support various network functions throughout the generation, transmission, distribution and consumption of energy by incorporating IoT devices (such as sensors, actuators and smart meters), as well as by providing the connectivity, automation and tracking for such devices. In this paper, we provide a comprehensive survey on IoT-aided SG systems, which includes the existing architectures, applications and prototypes of IoT-aided SG systems. This survey also highlights the open issues, challenges and future research directions for IoT-aided SG systems

Design and Service Provisioning Methods for Optical Networks in 5G and Beyond Scenarios

Network operators are deploying 5G while also considering the evolution towards 6G. They consider different enablers and address various challenges. One trend in the 5G deployment is network densification, i.e., deploying many small cell sites close to the users, which need a well-designed transport network (TN). The choice of the TN technology and the location for processing the 5G protocol stack functions are critical to contain capital and operational expenditures. Furthermore, it is crucial to ensure the resiliency of the TN infrastructure in case of a failure in nodes and/or links while the resource efficiency is maximized.Operators are also interested in 5G networks with flexibility and scalability features. In this context, one main question is where to deploy network functions so that the connectivity and compute resources are utilized efficiently while meeting strict service latency and availability requirements. Off-loading compute resources to large and central data centers (DCs) has some advantages, i.e., better utilization of compute resources at a lower cost. A backup path can be added to address service availability requirements when using compute off-loading strategies. This might impact the service blocking ratio and limit operators’ profit. The importance of this trade-off becomes more critical with the emergence of new 6G verticals.This thesis proposes novel methods to address the issues outlined above. To address the challenge of cost-efficient TN deployment, the thesis introduces a framework to study the total cost of ownership (TCO), latency, and reliability performance of a set of TN architectures for high-layer and low-layer functional split options. The architectural options are fiber- or microwave-based. To address the strict availability requirement, the thesis proposes a resource-efficient protection strategy against single node/link failure of the midhaul segment. The method selects primary and backup DCs for each aggregation node (i.e., nodes to which cell sites are connected) while maximizing the sharing of backup resources. Finally, to address the challenge of resource efficiency while provisioning services, the thesis proposes a backup-enhanced compute off-loading strategy (i.e., resource-efficient provisioning (REP)). REP selects a DC, a connectivity path, and (optionally) a backup path for each service request with the aim of minimizing resource usage while the service latency and availability requirements are met.Our results of the techno-economic assessment of the TN options reveal that, in some cases, microwave can be a good substitute for fiber technology. Several factors, including the geo-type, functional split option, and the cost of fiber trenching and microwave equipment, influence the effectiveness of the microwave. The considered architectures show similar latency and reliability performance and meet the 5G service requirements. The thesis also shows that a protection strategy based on shared connectivity and compute resources can lead to significant cost savings compared to benchmarks based on dedicated backup resources. Finally, the thesis shows that the proposed backup-enhanced compute off-loading strategy offers advantages in service blocking ratio and profit gain compared to a conventional off-loading approach that does not add a backup path. Benefits are even more evident considering next-generation services, e.g., expected on the market in 3 to 5 years, as the demand for services with stringent latency and availability will increase

Future benefits and applications of intelligent on-board processing to VSAT services

The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified

Intersatellite Link (ISL) application to commercial communications satellites. Volume 1: Executive summary

Based on a comprehensive evaluation of the fundamental Intersatellite Link (ISL) systems characteristics, potential applications of ISLs to domestic, regional, and global commercial satellite communications were identified, and their cost-effectiveness and other systems benefits quantified wherever possible. Implementation scenarios for the cost-effective communications satellite systems employing ISLs were developed for the first launch in 1993 to 1994 and widespread use of ISLs in the early 2000's. Critical technology requirements for both the microwave (60 GHz) and optical (0.85 micron) ISL implementations were identified, and their technology development programs, including schedule and cost estimates, were derived

Total Cost of Ownership of Digital vs. Analog Radio-Over-Fiber Architectures for 5G Fronthauling

The article analyzes the total cost of ownership (TCO) of 5G fronthauling solutions based on analog and digital radio-over-fiber (RoF) architectures in cloud radio access networks (C-RANs). The capital and operational expenditures (CAPEX, OPEX) are assessed, for a 10-year period, considering three different RoF techniques: intermediate frequency analog RoF (IF-A-RoF), digital signal processing (DSP) assisted analog RoF (DSP-A-RoF), and digital RoF (D-RoF) based on the common public radio interface (CPRI) specifications. The greenfield deployment scenario under exam includes both fiber trenching (FT) and fiber leasing (FL) options. The TCO is assessed while varying (i) the number of aggregated subcarriers, (ii) the number of three-sector antennas located at the base station, and (iii) the mean fiber-hop length. The comparison highlights the significance that subcarrier aggregation has on the cost efficiency of the analog RoF solutions. In addition, the analysis details the contribution of each cost category to the overall CAPEX and OPEX values. The obtained results indicate that subcarrier aggregation via DSP results in high cost efficiency for a mobile fronthaul network, while a CPRI-based architecture together with FL brings the highest OPEX value