A rate-splitting approach to multiple-antenna broadcasting

Signal processing techniques for multiple-antenna transmission can exploit the spatial dimension of the wireless channel to serve multiple users simultaneously, achieving high spectral efficiencies. Realizing such gains; however, is strongly dependent on the availability of highly accurate and up-to-date Channel State Information at the Transmitter (CSIT). This stems from the necessity to deal with multiuser interference through preprocessing; as receivers cannot coordinate in general. In wireless systems, CSIT is subject to uncertainty due to estimation and quantization errors, delays and mismatches. This thesis proposes optimized preprocessing techniques for broadcasting scenarios where a multi-antenna transmitter communicates with single-antenna receivers under CSIT uncertainties. First, we consider a scenario where the transmitter communicates an independent message to each receiver. The most popular preprocessing techniques in this setup are based on linear precoding (or beamforming). Despite their near-optimum rate performances when highly accurate CSIT is available, we show that such techniques exhibit severe losses under CSIT uncertainties, even when optimally designed. We depart from this conventional approach and adopt an unorthodox transmission strategy based on Rate-Splitting (RS), which relies on broadcasting a common data stream on top of the private data streams precoded using partial CSIT. We propose an average Weighted Minimum Mean Square Error (WMMSE) algorithm to maximize the ergodic sum-rate performance. While the ergodic sum-rate measure captures the long-term overall performance, it is not well suited for delay-limited or fairness based transmissions. Hence, we generalize the RS strategy to formulate the problem of achieving robust max-min fairness over one random fading state under a bounded CSIT uncertainty model. We derive new performance limits in terms of the symmetric-DoF under heterogeneous CSIT qualities across users to identify the RS gains. Then, a robust WMMSE algorithm based on the cutting-set method is proposed to solve the semi-infinite optimization problem. This framework is extended to address the problem of power minimization under Quality of Service (QoS) constraints. Finally, we consider the problem of achieving max-min fairness in a multigroup multicasting scenario, where each message is intended to a group of users. We assume perfect CSIT in this setup, where the presence of multiple users in each group is thought of as a source of (finite) uncertainty. The DoF performance of conventional beamforming techniques are derived from which their limitations are identified. The RS strategy is then extended to this scenario, where we show that significant DoF gains can be achieved. The RS precoder optimization problem in this setup is then solved using the WMMSE approach.Open Acces

From the conventional MIMO to massive MIMO systems: performance analysis and energy efficiency optimization

The main topic of this thesis is based on multiple-input multiple-output (MIMO) wireless communications, which is a novel technology that has attracted great interest in the last twenty years. Conventional MIMO systems using up to eight antennas play a vital role in the urban cellular network, where the deployment of multiple antennas have significantly enhanced the throughput without taking extra spectrum or power resources. The massive MIMO systems “scales” up the benefits that offered by the conventional MIMO systems. Using sixty four or more antennas at the BS not only improves the spectrum efficiency significantly, but also provides additional link robustness. It is considered as a key technology in the fifth generation of mobile communication technology standards network, and the design of new algorithms for these two systems is the basis of the research in this thesis. Firstly, at the receiver side of the conventional MIMO systems, a general framework of bit error rate (BER) approximation for the detection algorithms is proposed, which aims to support an adaptive modulation scheme. The main idea is to utilize a simplified BER approximation scheme, which is based on the union bound of the maximum-likelihood detector (MLD), whereby the bit error rate (BER) performance of the detector for the varying channel qualities can be efficiently predicted. The K-best detector is utilized in the thesis because its quasi- MLD performance and the parallel computational structure. The simulation results have clearly shown the adaptive K-best algorithm, by applying the simplified approximation method, has much reduced computational complexity while still maintaining a promising BER performance. Secondly, in terms of the uplink channel estimation for the massive MIMO systems with the time-division-duplex operation, the performance of the Grassmannian line packing (GLP) based uplink pilot codebook design is investigated. It aims to eliminate the pilot contamination effect in order to increase the downlink achievable rate. In the case of a limited channel coherence interval, the uplink codebook design can be treated as a line packing problem in a Grassmannian manifold. The closed-form analytical expressions of downlink achievable rate for both the single-cell and multi-cell systems are proposed, which are intended for performance analysis and optimization. The numerical results validate the proposed analytical expressions and the rate gains by using the GLP-based uplink codebook design. Finally, the study is extended to the energy efficiency (EE) of the massive MIMO system, as the reduction carbon emissions from the information and communication technology is a long-term target for the researchers. An effective framework of maximizing the EE for the massive MIMO systems is proposed in this thesis. The optimization starts from the maximization of the minimum user rate, which is aiming to increase the quality-of-service and provide a feasible constraint for the EE maximization problem. Secondly, the EE problem is a non-concave problem and can not be solved directly, so the combination of fractional programming and the successive concave approximation based algorithm are proposed to find a good suboptimal solution. It has been shown that the proposed optimization algorithm provides a significant EE improvement compared to a baseline case

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Approximations for Performance Analysis in Wireless Communications and Applications to Reconfigurable Intelligent Surfaces

In the last few decades, the field of wireless communications has witnessed significant technological advancements to meet the needs of today’s modern world. The rapidly emerging technologies, however, are becoming increasingly sophisticated, and the process of investigating their performance and assessing their applicability in the real world is becoming more challenging. That has aroused a relatively wide range of solutions in the literature to study the performance of the different communication systems or even draw new results that were difficult to obtain. These solutions include field measurements, computer simulations, and theoretical solutions such as alternative representations, approximations, or bounds of classic functions that commonly appear in performance analyses. Field measurements and computer simulations have significantly improved performance evaluation in communication theory. However, more advanced theoretical solutions can be further developed in order to avoid using the ex- pensive and time-consuming wireless communications measurements, replace the numerical simulations, which can sometimes be unreliable and suffer from failures in numerical evaluation, and achieve analytically simpler results with much higher accuracy levels than the existing theoretical ones. To this end, this thesis firstly focuses on developing new approximations and bounds using unified approaches and algorithms that can efficiently and accurately guide researchers through the design of their adopted wireless systems and facilitate the conducted performance analyses in the various communication systems. Two performance measures are of primary interest in this study, namely the average error probability and the ergodic capacity, due to their valuable role in conducting a better understanding of the systems’ behavior and thus enabling systems engineers to quickly detect and resolve design issues that might arise. In particular, several parametric expressions of different analytical forms are developed to approximate or bound the Gaussian Q-function, which occurs in the error probability analysis. Additionally, any generic function of the Q-function is approximated or bounded using a tractable exponential expression. Moreover, a unified logarithmic expression is proposed to approximate or bound the capacity integrals that occur in the capacity analysis. A novel systematic methodology and a modified version of the classical Remez algorithm are developed to acquire optimal coefficients for the accompanying parametric approximation or bound in the minimax sense. Furthermore, the quasi-Newton algorithm is implemented to acquire optimal coefficients in terms of the total error. The average symbol error probability and ergodic capacity are evaluated for various applications using the developed tools. Secondly, this thesis analyzes a couple of communication systems assisted with reconfigurable intelligent surfaces (RISs). RIS has been gaining significant attention lately due to its ability to control propagation environments. In particular, two communication systems are considered; one with a single RIS and correlated Rayleigh fading channels, and the other with multiple RISs and non-identical generic fading channels. Both systems are analyzed in terms of outage probability, average symbol error probability, and ergodic capacity, which are derived using the proposed tools. These performance measures reveal that better performance is achieved when assisting the communication system with RISs, increasing the number of reflecting elements equipped on the RISs, or locating the RISs nearer to either communication node. In conclusion, the developed approximations and bounds, together with the optimized coefficients, provide more efficient tools than those available in the literature, with richer capabilities reflected by the more robust closed-form performance analysis, significant increase in accuracy levels, and considerable reduction in analytical complexity which in turns can offer more understanding into the systems’ behavior and the effect of the different parameters on their performance. Therefore, they are expected to lay the groundwork for the investigation of the latest communication technologies, such as RIS technology, whose performance has been studied for some system models in this thesis using the developed tools

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics