Optimized techniques for real-time microwave and millimeter wave SAR imaging

Microwave and millimeter wave synthetic aperture radar (SAR)-based imaging techniques, used for nondestructive evaluation (NDE), have shown tremendous usefulness for the inspection of a wide variety of complex composite materials and structures. Studies were performed for the optimization of uniform and nonuniform sampling (i.e., measurement positions) since existing formulations of SAR resolution and sampling criteria do not account for all of the physical characteristics of a measurement (e.g., 2D limited-size aperture, electric field decreasing with distance from the measuring antenna, etc.) and nonuniform sampling criteria supports sampling below the Nyquist rate. The results of these studies demonstrate optimum sampling given design requirements that fully explain resolution dependence on sampling criteria. This work was then extended to manually-selected and nonuniformly distributed samples such that the intelligence of the user may be utilized by observing SAR images being updated in real-time. Furthermore, a novel reconstruction method was devised that uses components of the SAR algorithm to advantageously exploit the inherent spatial information contained in the data, resulting in a superior final SAR image. Furthermore, better SAR images can be obtained if multiple frequencies are utilized as compared to single frequency. To this end, the design of an existing microwave imaging array was modified to support multiple frequency measurement. Lastly, the data of interest in such an array may be corrupted by coupling among elements since they are closely spaced, resulting in images with an increased level of artifacts. A method for correcting or pre-processing the data by using an adaptation of correlation canceling technique is presented as well --Abstract, page iii

Real-time and portable microwave imaging system

Microwave and millimeter wave imaging has shown tremendous utility in a wide variety of applications. These techniques are primarily based on measuring coherent electric field distribution on the target being imaged. Mechanically scanned systems are the simple and low cost solution in microwave imaging. However, these systems are typically bulky and slow. This dissertation presents a design for a 2D switched imaging array that utilizes modulated scattering techniques for spatial multiplexing of the signal. The system was designed to be compact, coherent, possessing high dynamic range, and capable of video frame rate imaging. Various aspects of the system design were optimized to achieve the design objectives. The 2D imaging system as designed and described in this dissertation utilized PIN diode loaded resonant elliptical slot antennas as array elements. The slot antennas allow for incorporating the switching into the antennas thus reducing the cost and size of the array. Furthermore, these slots are integrated in a simple low loss waveguide network. Moreover, the sensitivity and dynamic range of this system is improved by utilizing a custom designed heterodyne receiver and matched filter. This dissertation also presents an analysis on the properties of this system. The performance of the multiplexing scheme, the noise floor and the dynamic range of the receivers are investigated. Furthermore, sources of errors such as mutual coupling and array response dispersion are also investigated. Finally, utilizing this imaging system for various applications such as 2D electric field mapping, scatterer localization, and nondestructive imaging is demonstrated --Abstract, Page iii

Hardware architectures for compact microwave and millimeter wave cameras

Millimeter wave SAR imaging has shown promise as an inspection tool for human skin for characterizing burns and skin cancers. However, the current state-of-the-art in microwave camera technology is not yet suited for developing a millimeter wave camera for human skin inspection. Consequently, the objective of this dissertation has been to build the necessary foundation of research to achieve such a millimeter wave camera. First, frequency uncertainty in signals generated by a practical microwave source, which is prone to drift in output frequency, was studied to determine its effect on SAR-generated images. A direct relationship was found between the level of image distortions caused by frequency uncertainty and the product of frequency uncertainty and distance between the imaging measurement grid and sample under test. The second investigation involved the development of a millimeter wave imaging system that forms the basic building block for a millimeter wave camera. The imaging system, composed of two system-on-chip transmitters and receivers and an antipodal Vivaldi-style antenna, operated in the 58-64 GHz frequency range and employed the ω-k SAR algorithm. Imaging tests on burnt pigskin showed its potential for imaging and characterizing flaws in skin. The final investigation involved the development of a new microwave imaging methodology, named Chaotic Excitation Synthetic Aperture Radar (CESAR), for designing microwave and millimeter wave cameras at a fraction of the size and hardware complexity of previous systems. CESAR is based on transmitting and receiving from all antennas in a planar array simultaneously. A small microwave camera operating in the 23-25 GHz frequency was designed and fabricated based on CESAR. Imaging results with the camera showed it was capable of basic feature detection for various applications --Abstract, page iv

Development and Improvement of Airborne Remote Sensing Radar Platforms

With the recent record ice melt in the Arctic as well as the dramatic changes occurring in the Antarctic, the need and urgency to characterize ice sheets in these regions has become a research thrust of both the NSF and NASA. Airborne remote sensing is the most effective way to collect the necessary data on a large scale with fine resolution. Current models for determining the relationship between the world's great ice sheets and global sea-level are limited by the availability of data on bed topography, glacier volume, internal layers, and basal conditions. This need could be satisfied by equipping long range aircraft with an appropriately sensitive suite of sensors. The goal of this work is to enable two new airborne radar installations for use in cryospheric surveying, and improve these systems as well as future systems by addressing aircraft integration effects on antenna-array performance. An aerodynamic fairing is developed to enable a NASA DC-8 to support a 5-element array for CReSIS's MCoRDS radar, and several structures are also developed to enable a NASA P-3 to support a 15-element MCoRDS array, as well as three other radar antenna-arrays used for cryospheric surveying. Together, these aircraft have flown almost 200 missions and collected 550 TB of unique science data. In addition, a compensation method is developed to improve beamforming and clutter suppression on wing-mounted arrays by mitigating phase center errors due to wing-flexure. This compensation method is applied to the MVDR beamforming algorithm to improve clutter suppression by using element displacement information to apply appropriate phase shifts. The compensation demonstrated an average SINR increase of 5-10 dB. The hardware contributions of this work have substantially contributed to the state-of-the-art for polar remotes sensing, as evidenced by new data sets made available to the science community and widespread use and citation of the data. The investigations of aircraft integration effects on antenna-arrays will improve future data sets by characterizing the performance degradation. The wing-flexure compensation will greatly improve beam formation and clutter suppression. Increased clutter suppression in airborne radars is crucial to improving next generation ice sheet models and sea-level rise predictions

Index to NASA Tech Briefs, 1974

The following information was given for 1974: (1) abstracts of reports dealing with new technology derived from the research and development activities of NASA or the U.S. Atomic Energy Commission, arranged by subjects: electronics/electrical, electronics/electrical systems, physical sciences, materials/chemistry, life sciences, mechanics, machines, equipment and tools, fabrication technology, and computer programs, (2) indexes for the above documents: subject, personal author, originating center

Microwaves in Quantum Computing

Quantum information processing systems rely on a broad range of microwave technologies and have spurred development of microwave devices and methods in new operating regimes. Here we review the use of microwave signals and systems in quantum computing, with specific reference to three leading quantum computing platforms: trapped atomic ion qubits, spin qubits in semiconductors, and superconducting qubits. We highlight some key results and progress in quantum computing achieved through the use of microwave systems, and discuss how quantum computing applications have pushed the frontiers of microwave technology in some areas. We also describe open microwave engineering challenges for the construction of large-scale, fault-tolerant quantum computers.Comment: Invited review article, to appear in IEEE Journal of Microwaves. 29 pages, 13 figures, $10^{6}$ to $10^{11}$ H

NASA patent abstracts bibliography: A continuing bibliography. Section 1: Abstracts (supplement 32)

Abstracts are provided for 136 patents and patent applications entered into the NASA scientific and technical information system during the period July through December 1987. Each entry consists of a citation , an abstract, and in most cases, a key illustration selected from the patent or patent application

Communication satellite technology: State of the art and development opportunities

Opportunities in communication satellite technology are identified and defined. Factors that tend to limit the ready availability of satellite communication to an increasingly wide group of users are evaluated. Current primary limitations on this wide utilization are the availability of frequency and/or synchronous equatorial satellite positions and the cost of individual user Earth terminals. The former could be ameliorated through the reuse of frequencies, the use of higher frequency bands, and the reduction of antenna side lobes. The latter limitation requires innovative hardware, design, careful system design, and large scale production