An Open Core System-on-chip Platform

The design cycle required to produce a System-on-Chip can be reduced by providing pre-designed built-in features and functions such as configurable I/O, power and ground grids, block RAMs, timing generators and other embedded intellectual property (IP) blocks. A basic combination of such built-in features is known as a platform. The major objective of this thesis was to design and implement one such System-on-Chip platform using open IP cores targeting the TSMC-0.18 CMOS process. The integrated System-on-Chip platform, which contains approximately four million transistors, was synthesized using Synopsys - Design Compiler and placed and routed using Cadence - First Encounter, Silicon Ensemble. Design verification was done at the pre-synthesis, post-synthesis and post-layout levels using Mentor Graphics - ModelSim. Final layout was imported into Cadence - Virtuoso to perform design rule check. A tutorial was written to enable others to create derivative designs of this platform quickly

Decoupling User Interface Design Using Libraries of Reusable Components

The integration of electronic and mechanical hardware, software and interaction design presents a challenging design space for researchers developing physical user interfaces and interactive artifacts. Currently in the academic research community, physical user interfaces and interactive artifacts are predominantly designed and prototyped either as one-off instances from the ground up, or using functionally rich hardware toolkits and prototyping systems. During this prototyping phase, undertaking an integral design of the interface or interactive artifact’s electronic hardware is frequently constraining due to the tight couplings between the different design realms and the typical need for iterations as the design matures. Several current toolkit designs have consequently embraced component-sharing and component-swapping modular designs with a view to extending flexibility and improving researcher freedom by disentangling and softening the cause-effect couplings. Encouraged by early successes of these toolkits, this research work strives to further enhance these freedoms by pursuing an alternative style and dimension of hardware modularity. Another motivation is our goal to facilitate the design and development of certain classes of interfaces and interactive artifacts for which current electronic design approaches are argued to be restrictively constraining (e.g., relating to scale and complexity). Unfortunately, this goal of a new platform architecture is met with conceptual and technical challenges on the embedded system networking front. In response, this research investigates and extends a growing field of multi-module distributed embedded systems. We identify and characterize a sub-class of these systems, calling them embedded aggregates. We then outline and develop a framework for realizing the embedded aggregate class of systems. Toward this end, this thesis examines several architectures, topologies and communication protocols, making the case for and substantial steps toward the development of a suite of networking protocols and control algorithms to support embedded aggregates. We define a set of protocols, mechanisms and communication packets that collectively form the underlying framework for the aggregates. Following the aggregates design, we develop blades and tiles to support user interface researchers

NASA space station automation: AI-based technology review. Executive summary

Research and Development projects in automation technology for the Space Station are described. Artificial Intelligence (AI) based technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics

SystemVerilog Verification of Wishbone-Compliant Serial Peripheral Interface

Synchronous serial interfaces provide economical on-board communication between the processor, digital to analog and analog to digital converters, memory, and other building blocks on the chip. A number of Integrated Circuit (IC) manufacturers develop and produce components that are compatible with serial interfaces. The common serial interfaces include Serial Peripheral Interface (SPI), Inter-Integrated Circuit (I2C), Universal Asynchronous Receiver Transmitter (UART), and Universal Serial Bus (USB). SPI is widely used and advantageous over other serial interfaces due to its features of simplicity, low cost, clock synchronous, and non-interrupting high-speed data transfer rate. SPI is the core controller of the design. An open source hardware computer bus Wishbone is selected as the host controller enabling parallel data exchange for faster communication. Both the hardware buses employ a master-slave configuration which makes the bus-interfacing easier. This research presents a verification environment using SystemVerilog for the SPI Master device. An existing design from Open Cores is re-used, described as per latest specifications in Verilog at the Register Transfer Level (RTL) and is in conformity with the design-reuse methodology. This paper provides an understanding of the verification, layered test benches, Object-Oriented Technology (OOT), SystemVerilog, SPI features, SPI advantages, disadvantages, and applications, SPI data transmission and transfer formats, SPI registers, SPI sub-system and Wishbone-SPI architecture, and the test bench development methodology. The focus is to understand how OOT and SystemVerilog improve productivity and functional coverage in a verification environment by the use of different constructs, constrained-random techniques, coverage, and assertions. A test bench was developed to verify the SPI master core. Testbench components include a random transaction generator, a Wishbone driver, an SPI master as the design under test, a receiver as the SPI slave, a monitor with tasks to monitor the host and the core, test cases, and a scoreboard to record metrics, assertions and store expected and actual data

DESIGN MODULAR COMMAND AND DATA HANDLING SUBSYSTEM HARDWARE ARCHITECTURES

Over the past few years, On-Board Computing Systems for satellites have been facing a limited level of modularity. Modularity is the ability to reuse and reconstruct the system from a set of predesigned units, with minimal additional engineering effort. CDHS hardware systems currently available have a limited ability to scale with mission needs. This thesis addresses the integration of smaller form factor CDHS modules used for nanosatellites with the larger counterparts that are used for larger missions. In particular, the thesis discusses the interfacing between Modular Computer Systems based on Open Standard commonly used in large spacecrafts and PC/104 used for nanosatellites. It also aims to create a set of layers that would represent a hardware library of COTS-like modules. At the beginning, a review of related and previous work has been done to identify the gaps in previous studies and understand more about Modular Computer Systems based on Open Standard commonly used in large spacecrafts, such as cPCI Serial Space and SpaceVPX. Next, the design requirements have been set to achieve this thesis objectives, which included conducting a prestudy of system alternatives before creating a modular CDHS hardware architecture which was later tested. After, the hardware suitable for this architecture based on the specified requirements was chosen and the PCB was designed based on global standards. Later, several functional tests and communication tests were conducted to assess the practicality of the proposed architecture. Finally, thermal vacuum testing was done on one of the architecture’s layers to test its ability to withstand the space environment, with the aim to perform the vibration testing of the full modular architecture in the future. The aim of this thesis has been achieved after going through several tests, comparing between interfaces, and understanding the process of interfacing between different levels of the CDHS. The findings of this study pave the way for future research in the field and offer valuable insights that could contribute to the development of modular architectures for other satellite subsystems

A Model-Based Development and Verification Framework for Distributed System-on-Chip Architecture

The capabilities and thus, design complexity of VLSI-based embedded systems have increased tremendously in recent years, riding the wave of Moore’s law. The time-to-market requirements are also shrinking, imposing challenges to the designers, which in turn, seek to adopt new design methods to increase their productivity. As an answer to these new pressures, modern day systems have moved towards on-chip multiprocessing technologies. New architectures have emerged in on-chip multiprocessing in order to utilize the tremendous advances of fabrication technology. Platform-based design is a possible solution in addressing these challenges. The principle behind the approach is to separate the functionality of an application from the organization and communication architecture of hardware platform at several levels of abstraction. The existing design methodologies pertaining to platform-based design approach don’t provide full automation at every level of the design processes, and sometimes, the co-design of platform-based systems lead to sub-optimal systems. In addition, the design productivity gap in multiprocessor systems remain a key challenge due to existing design methodologies. This thesis addresses the aforementioned challenges and discusses the creation of a development framework for a platform-based system design, in the context of the SegBus platform - a distributed communication architecture. This research aims to provide automated procedures for platform design and application mapping. Structural verification support is also featured thus ensuring correct-by-design platforms. The solution is based on a model-based process. Both the platform and the application are modeled using the Unified Modeling Language. This thesis develops a Domain Specific Language to support platform modeling based on a corresponding UML profile. Object Constraint Language constraints are used to support structurally correct platform construction. An emulator is thus introduced to allow as much as possible accurate performance estimation of the solution, at high abstraction levels. VHDL code is automatically generated, in the form of “snippets” to be employed in the arbiter modules of the platform, as required by the application. The resulting framework is applied in building an actual design solution for an MP3 stereo audio decoder application.Siirretty Doriast

Achieving a better balance between productivity and performance on FPGAs through Heterogeneous Extensible Multiprocessor Systems

Field Programmable Gate Arrays (FPGAs) were first introduced circa 1980, and they held the promise of delivering performance levels associated with customized circuits, but with productivity levels more closely associated with software development. Achieving both performance and productivity objectives has been a long standing challenge problem for the reconfigurable computing community and remains unsolved today. On one hand, Vendor supplied design flows have tended towards achieving the high levels of performance through gate level customization, but at the cost of very low productivity. On the other hand, FPGA densities are following Moore\u27s law and and can now support complete multiprocessor system architectures. Thus FPGAs can be turned into an architecture with programmable processors which brings productivity but sacrifices the peak performance advantages of custom circuits. In this thesis we explore how the two use cases can be combined to achieve the best from both. The flexibility of the FPGAs to host a heterogeneous multiprocessor system with different types of programmable processors and custom accelerators allows the software developers to design a platform that matches the unique performance needs of their application. However, currently no automated approaches are publicly available to create such heterogeneous architectures as well as the software support for these platforms. Creating base architectures, configuring multiple tool chains, and repetitive engineering design efforts can and should be automated. This thesis introduces Heterogeneous Extensible Multiprocessor System (HEMPS) template approach which allows an FPGA to be programmed with productivity levels close to those associated with parallel processing, and with performance levels close to those associated with customized circuits. The work in this thesis introduces an ArchGen script to automate the generation of HEMPS systems as well as a library of portable and self tuning polymorphic functions. These tools will abstract away the HW/SW co-design details and provide a transparent programming language to capture different levels of parallelisms, without sacrificing productivity or portability

Using Platform Express for System-on-Chip Design

The advent of nanoscale technology brings with it an increase in system complexity with integrated circuit transistor numbers reaching hundreds of millions. Systems-on-chip are attaining a level of complexity where design turn-around times are a major factor. Reusing existing intellectual property blocks that are already verified for functionality could help minimize the design time and increase system reliability. This allows the designers to focus on more important product design aspects. Platform-based design is an effective method to deal with the increasing pressure on time-to-market. The approach also provides a practical solution to reduce the design and manufacturing costs. This thesis is a result of the of the ongoing Volunteer SoC project at the University of Tennessee and in this, we explore the possibility of employing the Platform Express (PX) tool for designing SoCs. The PX application enables system designers to rapidly build and verify SoC design concepts. The tool also promotes Intellectual Property (IP) integration within the built-in PX libraries. The tool utilizes XML for describing the IP data, which allows smooth integration of IP into a single design from many different sources. We have followed the complete IP integration flow and have successfully installed a component into the tool’s library and have also generated a system design using the same IP