Store-and-forward based methods for the signal control problem in large-scale congested urban road networks

The problem of designing network-wide traffic signal control strategies for large-scale congested urban road networks is considered. One known and two novel methodologies, all based on the store-and-forward modeling paradigm, are presented and compared. The known methodology is a linear multivariable feedback regulator derived through the formulation of a linear-quadratic optimal control problem. An alternative, novel methodology consists of an open-loop constrained quadratic optimal control problem, whose numerical solution is achieved via quadratic programming. Yet a different formulation leads to an open-loop constrained nonlinear optimal control problem, whose numerical solution is achieved by use of a feasible-direction algorithm. A preliminary simulation-based investigation of the signal control problem for a large-scale urban road network using these methodologies demonstrates the comparative efficiency and real-time feasibility of the developed signal control methods

Optimizing Coordinated Vehicle Platooning: An Analytical Approach Based on Stochastic Dynamic Programming

Platooning connected and autonomous vehicles (CAVs) can improve traffic and fuel efficiency. However, scalable platooning operations require junction-level coordination, which has not been well studied. In this paper, we study the coordination of vehicle platooning at highway junctions. We consider a setting where CAVs randomly arrive at a highway junction according to a general renewal process. When a CAV approaches the junction, a system operator determines whether the CAV will merge into the platoon ahead according to the positions and speeds of the CAV and the platoon. We formulate a Markov decision process to minimize the discounted cumulative travel cost, i.e. fuel consumption plus travel delay, over an infinite time horizon. We show that the optimal policy is threshold-based: the CAV will merge with the platoon if and only if the difference between the CAV's and the platoon's predicted times of arrival at the junction is less than a constant threshold. We also propose two ready-to-implement algorithms to derive the optimal policy. Comparison with the classical value iteration algorithm implies that our approach explicitly incorporating the characteristics of the optimal policy is significantly more efficient in terms of computation. Importantly, we show that the optimal policy under Poisson arrivals can be obtained by solving a system of integral equations. We also validate our results in simulation with Real-time Strategy (RTS) using real traffic data. The simulation results indicate that the proposed method yields better performance compared with the conventional method

Constrained dynamic control of traffic junctions

Excessive traffic in our urban environments has detrimental effects on our health, economy and standard of living. To mitigate this problem, an adaptive traffic lights signalling scheme is developed and tested in this paper. This scheme is based on a state space representation of traffic dynamics, controlled via a dynamic programme. To minimise implementation costs, only one loop detector is assumed at each link. The comparative advantages of the proposed system over optimal fixed time control are highlighted through an example. Results will demonstrate the flexibility of the system when applied to different junctions. Monte Carlo runs of the developed scheme highlight the consistency and repeatability of these results.peer-reviewe

A rolling-horizon quadratic-programming approach to the signal control problem in large-scale congested urban road networks

The paper investigates the efficiency of a recently developed signal control methodology, which offers a computationally feasible technique for real-time network-wide signal control in large-scale urban traffic networks and is applicable also under congested traffic conditions. In this methodology, the traffic flow process is modeled by use of the store-and-forward modeling paradigm, and the problem of network-wide signal control (including all constraints) is formulated as a quadratic-programming problem that aims at minimizing and balancing the link queues so as to minimize the risk of queue spillback. For the application of the proposed methodology in real time, the corresponding optimization algorithm is embedded in a rolling-horizon (model-predictive) control scheme. The control strategy’s efficiency and real-time feasibility is demonstrated and compared with the Linear-Quadratic approach taken by the signal control strategy TUC (Traffic-responsive Urban Control) as well as with optimized fixed-control settings via their simulation-based application to the road network of the city centre of Chania, Greece, under a number of different demand scenarios. The comparative evaluation is based on various criteria and tools including the recently proposed fundamental diagram for urban network traffic

An Approximate Dynamic Programming Approach to Vehicle Platooning Coordination in Networks

Platooning connected and autonomous vehicles (CAVs) provide significant benefits in terms of traffic efficiency and fuel economy. However, most existing platooning systems assume the availability of pre-determined plans, which is not feasible in real-time scenarios. In this paper, we address this issue in time-dependent networks by formulating a Markov decision process at each junction, aiming to minimize travel time and fuel consumption. Initially, we analyze coordinated platooning without routing to explore the cooperation among controllers on an identical path. We propose two novel approaches based on approximate dynamic programming, offering suboptimal control in the context of a stochastic finite horizon problem. The results demonstrate the superiority of the approximation in the policy space. Furthermore, we investigate platooning in a network setting, where speed profiles and routes are determined simultaneously. To simplify the problem, we decouple the action space by prioritizing routing decisions based on travel time estimation. We subsequently employ the aforementioned policy approximation to determine speed profiles, considering essential parameters such as travel times. Our simulation results in SUMO indicate that our method yields better performance than conventional approaches, leading to potential travel cost savings of up to 40%. Additionally, we evaluate the resilience of our approach in dynamically changing networks, affirming its ability to maintain efficient platooning operations

A Link-based Mixed Integer LP Approach for Adaptive Traffic Signal Control

This paper is concerned with adaptive signal control problems on a road network, using a link-based kinematic wave model (Han et al., 2012). Such a model employs the Lighthill-Whitham-Richards model with a triangular fundamental diagram. A variational type argument (Lax, 1957; Newell, 1993) is applied so that the system dynamics can be determined without knowledge of the traffic state in the interior of each link. A Riemann problem for the signalized junction is explicitly solved; and an optimization problem is formulated in continuous-time with the aid of binary variables. A time-discretization turns the optimization problem into a mixed integer linear program (MILP). Unlike the cell-based approaches (Daganzo, 1995; Lin and Wang, 2004; Lo, 1999b), the proposed framework does not require modeling or computation within a link, thus reducing the number of (binary) variables and computational effort. The proposed model is free of vehicle-holding problems, and captures important features of signalized networks such as physical queue, spill back, vehicle turning, time-varying flow patterns and dynamic signal timing plans. The MILP can be efficiently solved with standard optimization software.Comment: 15 pages, 7 figures, current version is accepted for presentation at the 92nd Annual Meeting of Transportation Research Boar

Objectives, stimulus and feedback in signal control of road traffic

This article identifies the prospective role of a range of intelligent transport systems technologies for the signal control of road traffic. We discuss signal control within the context of traffic management and control in urban road networks and then present a control-theoretic formulation for it that distinguishes the various roles of detector data, objectives of optimization, and control feedback. By reference to this, we discuss the importance of different kinds of variability in traffic flows and review the state of knowledge in respect of control in the presence of different combinations of them. In light of this formulation and review, we identify a range of important possibilities for contributions to traffic management and control through traffic measurement and detection technology, and contemporary flexible optimization techniques that use various kinds of automated learning