Analysis of Simulation Methods for Far-end Crosstalk Cancellation

The information capacity of current digital subscriber lines is limited mainly by a crosstalk in metallic cables. The influence of near-end crosstalk (NEXT) can be well cancelled by frequency duplex method, but the elimination of far-end crosstalk (FEXT) is not so easy. Therefore FEXT is the dominant source of disturbance in current digital subscriber lines (xDSL). One of the most promising solutions for far-end crosstalk cancellation is Vectored Discrete Multi-tone modulation (VDMT). For the testing of VDMT modulation efficiency it will be necessary to implement advanced methods for modeling of far-end crosstalk to obtain required predictions of the crosstalk behavior in a cable. The actual simple FEXT model is not very accurate and does not provide realistic results. That is why the new method for modeling of far-end crosstalk was developed and is presented in this paper. This advanced model is based on the capacitive and inductive unbalances between pairs in a cable and it also respects the cable’s internal structure. The results of the model are subsequently used for the simulation of VDMT modulation and its impact on the FEXT cancellation. These simulations are based on the estimations of transmission speed of VDSL2 lines with VDMT modulation

Real-time dynamic spectrum management for multi-user multi-carrier communication systems

Dynamic spectrum management is recognized as a key technique to tackle interference in multi-user multi-carrier communication systems and networks. However existing dynamic spectrum management algorithms may not be suitable when the available computation time and compute power are limited, i.e., when a very fast responsiveness is required. In this paper, we present a new paradigm, theory and algorithm for real-time dynamic spectrum management (RT-DSM) under tight real-time constraints. Specifically, a RT-DSM algorithm can be stopped at any point in time while guaranteeing a feasible and improved solution. This is enabled by the introduction of a novel difference-of-variables (DoV) transformation and problem reformulation, for which a primal coordinate ascent approach is proposed with exact line search via a logarithmicly scaled grid search. The concrete proposed algorithm is referred to as iterative power difference balancing (IPDB). Simulations for different realistic wireline and wireless interference limited systems demonstrate its good performance, low complexity and wide applicability under different configurations.Comment: 14 pages, 9 figures. This work has been submitted to the IEEE for possible publicatio

Modeling of Transmission Functions and Crosstalk in Metallic Cables for Implementation of MIMO Concept

The new promising wireless networks based on multi-carrier modulations (MCM) and multiple-input multiple-output concept (MIMO) will soon offer high-speed digital connections. Their access points are mostly connected by fixed metallic lines to core data and telecommunication networks. That is why it will also be necessary to increase the transmission speed and overall performance of these fixed access networks adequately in order to meet the expected requirements of wireless connections. It would be possible to use VDSL2 digital subscriber lines and implement MIMO concept into the existing metallic networks for this purpose, but before that it will be necessary to solve several problems first. The transmission capacity of present VDSL2 digital lines is limited mainly by crosstalk occurring in metallic cables. This paper describes a new method for modeling of transmission functions and crosstalk in multi-pair and multi-quad metallic cables including its mathematical implementation, and it also gives an example of results obtained so far. The presented model is based on statistical evaluations of measured values, generation of pseudo-random components of frequency response and subsequent filtration process

Physical Layer Techniques for High Frequency Wireline Broadband Systems

This thesis collects contributions to wireline and wireless communication systems with an emphasis on multiuser and multicarrier physical layer technology. To deliver increased capacity, modern wireline access systems such as G.fast extend the signal bandwidth up from tens to hundreds of MHz. This ambitious development revealed a number of unforeseen hurdles such as the impact of impedance changes in various forms. Impedance changes have a strong effect on the performance of multi-user crosstalk mitigation techniques such as vectoring. The first part of the thesis presents papers covering the identification of one of these problems, a model describing why it occurs and a method to mitigate its effects, improving line stability for G.fast systems.A second part of the thesis deals with the effects of temperature changes on wireline channels. When a vectored (MIMO) wireline system is initialized, channel estimates need to be obtained. This thesis presents contributions on the feasibility of re-using channel coefficients to speed up the vectoring startup procedures, even after the correct coefficients have changed, e.g., due to temperature changes. We also present extensive measurement results showing the effects of temperature changes on copper channels using a temperature chamber and British cables. The last part of the thesis presents three papers on the convergence of physical layer technologies, more specifically the deployment of OFDM-based radio systems using twisted pairs in different ways. In one proposed scenario, the idea of using the access copper lines to deploy small cells inside users' homes is explored. The feasibility of the concept, the design of radio-heads and a practical scheme for crosstalk mitigation are presented in three contributions