Cooperative Multi-Cell Networks: Impact of Limited-Capacity Backhaul and Inter-Users Links

Cooperative technology is expected to have a great impact on the performance of cellular or, more generally, infrastructure networks. Both multicell processing (cooperation among base stations) and relaying (cooperation at the user level) are currently being investigated. In this presentation, recent results regarding the performance of multicell processing and user cooperation under the assumption of limited-capacity interbase station and inter-user links, respectively, are reviewed. The survey focuses on related results derived for non-fading uplink and downlink channels of simple cellular system models. The analytical treatment, facilitated by these simple setups, enhances the insight into the limitations imposed by limited-capacity constraints on the gains achievable by cooperative techniques

The Private Key Capacity of a Cooperative Pairwise-Independent Network

This paper studies the private key generation of a cooperative pairwise-independent network (PIN) with M+2 terminals (Alice, Bob and M relays), M >= 2. In this PIN, the correlated sources observed by every pair of terminals are independent of those sources observed by any other pair of terminal. All the terminals can communicate with each other over a public channel which is also observed by Eve noiselessly. The objective is to generate a private key between Alice and Bob under the help of the M relays; such a private key needs to be protected not only from Eve but also from individual relays simultaneously. The private key capacity of this PIN model is established, whose lower bound is obtained by proposing a novel random binning (RB) based key generation algorithm, and the upper bound is obtained based on the construction of M enhanced source models. The two bounds are shown to be exactly the same. Then, we consider a cooperative wireless network and use the estimates of fading channels to generate private keys. It has been shown that the proposed RB-based algorithm can achieve a multiplexing gain M-1, an improvement in comparison with the existing XOR- based algorithm whose achievable multiplexing gain is about [M]/2.Comment: 5 pages, 3 figures, IEEE ISIT 2015 (to appear

Integer-Forcing Linear Receivers

Linear receivers are often used to reduce the implementation complexity of multiple-antenna systems. In a traditional linear receiver architecture, the receive antennas are used to separate out the codewords sent by each transmit antenna, which can then be decoded individually. Although easy to implement, this approach can be highly suboptimal when the channel matrix is near singular. This paper develops a new linear receiver architecture that uses the receive antennas to create an effective channel matrix with integer-valued entries. Rather than attempting to recover transmitted codewords directly, the decoder recovers integer combinations of the codewords according to the entries of the effective channel matrix. The codewords are all generated using the same linear code which guarantees that these integer combinations are themselves codewords. Provided that the effective channel is full rank, these integer combinations can then be digitally solved for the original codewords. This paper focuses on the special case where there is no coding across transmit antennas and no channel state information at the transmitter(s), which corresponds either to a multi-user uplink scenario or to single-user V-BLAST encoding. In this setting, the proposed integer-forcing linear receiver significantly outperforms conventional linear architectures such as the zero-forcing and linear MMSE receiver. In the high SNR regime, the proposed receiver attains the optimal diversity-multiplexing tradeoff for the standard MIMO channel with no coding across transmit antennas. It is further shown that in an extended MIMO model with interference, the integer-forcing linear receiver achieves the optimal generalized degrees-of-freedom.Comment: 40 pages, 16 figures, to appear in the IEEE Transactions on Information Theor

Bounds on the Capacity of the Relay Channel with Noncausal State at Source

We consider a three-terminal state-dependent relay channel with the channel state available non-causally at only the source. Such a model may be of interest for node cooperation in the framework of cognition, i.e., collaborative signal transmission involving cognitive and non-cognitive radios. We study the capacity of this communication model. One principal problem is caused by the relay's not knowing the channel state. For the discrete memoryless (DM) model, we establish two lower bounds and an upper bound on channel capacity. The first lower bound is obtained by a coding scheme in which the source describes the state of the channel to the relay and destination, which then exploit the gained description for a better communication of the source's information message. The coding scheme for the second lower bound remedies the relay's not knowing the states of the channel by first computing, at the source, the appropriate input that the relay would send had the relay known the states of the channel, and then transmitting this appropriate input to the relay. The relay simply guesses the sent input and sends it in the next block. The upper bound is non trivial and it accounts for not knowing the state at the relay and destination. For the general Gaussian model, we derive lower bounds on the channel capacity by exploiting ideas in the spirit of those we use for the DM model; and we show that these bounds are optimal for small and large noise at the relay irrespective to the strength of the interference. Furthermore, we also consider a special case model in which the source input has two components one of which is independent of the state. We establish a better upper bound for both DM and Gaussian cases and we also characterize the capacity in a number of special cases.Comment: Submitted to the IEEE Transactions on Information Theory, 54 pages, 6 figure

Compute-and-Forward: Harnessing Interference through Structured Codes

Interference is usually viewed as an obstacle to communication in wireless networks. This paper proposes a new strategy, compute-and-forward, that exploits interference to obtain significantly higher rates between users in a network. The key idea is that relays should decode linear functions of transmitted messages according to their observed channel coefficients rather than ignoring the interference as noise. After decoding these linear equations, the relays simply send them towards the destinations, which given enough equations, can recover their desired messages. The underlying codes are based on nested lattices whose algebraic structure ensures that integer combinations of codewords can be decoded reliably. Encoders map messages from a finite field to a lattice and decoders recover equations of lattice points which are then mapped back to equations over the finite field. This scheme is applicable even if the transmitters lack channel state information.Comment: IEEE Trans. Info Theory, to appear. 23 pages, 13 figure

Fulcrum: Flexible Network Coding for Heterogeneous Devices

Producción CientíficaWe introduce Fulcrum, a network coding framework that achieves three seemingly conflicting objectives: 1) to reduce the coding coefficient overhead down to nearly n bits per packet in a generation of n packets; 2) to conduct the network coding using only Galois field GF(2) operations at intermediate nodes if necessary, dramatically reducing computing complexity in the network; and 3) to deliver an end-to-end performance that is close to that of a high-field network coding system for high-end receivers, while simultaneously catering to low-end receivers that decode in GF(2). As a consequence of 1) and 3), Fulcrum has a unique trait missing so far in the network coding literature: providing the network with the flexibility to distribute computational complexity over different devices depending on their current load, network conditions, or energy constraints. At the core of our framework lies the idea of precoding at the sources using an expansion field GF(2 h ), h > 1, to increase the number of dimensions seen by the network. Fulcrum can use any high-field linear code for precoding, e.g., Reed-Solomon or Random Linear Network Coding (RLNC). Our analysis shows that the number of additional dimensions created during precoding controls the trade-off between delay, overhead, and computing complexity. Our implementation and measurements show that Fulcrum achieves similar decoding probabilities as high field RLNC but with encoders and decoders that are an order of magnitude faster.Green Mobile Cloud project (grant DFF-0602-01372B)Colorcast project (grant DFF-0602-02661B)TuneSCode project (grant DFF - 1335-00125)Danish Council for Independent Research (grant DFF-4002-00367)Ministerio de Economía, Industria y Competitividad - Fondo Europeo de Desarrollo Regional (grants MTM2012-36917-C03-03 / MTM2015-65764-C3-2-P / MTM2015-69138-REDT)Agencia Estatal de Investigación - Fondo Social Europeo (grant RYC-2016-20208)Aarhus Universitets Forskningsfond Starting (grant AUFF-2017-FLS-7-1

Analysis of a Cooperative Strategy for a Large Decentralized Wireless Network

This paper investigates the benefits of cooperation and proposes a relay activation strategy for a large wireless network with multiple transmitters. In this framework, some nodes cooperate with a nearby node that acts as a relay, using the decode-and-forward protocol, and others use direct transmission. The network is modeled as an independently marked Poisson point process and the source nodes may choose their relays from the set of inactive nodes. Although cooperation can potentially lead to significant improvements in the performance of a communication pair, relaying causes additional interference in the network, increasing the average noise that other nodes see. We investigate how source nodes should balance cooperation vs. interference to obtain reliable transmissions, and for this purpose we study and optimize a relay activation strategy with respect to the outage probability. Surprisingly, in the high reliability regime, the optimized strategy consists on the activation of all the relays or none at all, depending on network parameters. We provide a simple closed-form expression that indicates when the relays should be active, and we introduce closed form expressions that quantify the performance gains of this scheme with respect to a network that only uses direct transmission.Comment: Updated version. To appear in IEEE Transactions on Networkin